ppmPortProtocolTargetPort
PRINTER-PORT-MONITOR-MIB ·
.1.3.6.1.4.1.2699.1.2.1.3.1.1.6
Object
column
Integer32
The transport (TCP, UDP, etc.) target port number for this
protocol, i.e., an alternate port from the protocol default, or
zero if not specified (use protocol default). This object MAY
be used for any print protocol (from the Internet, NetWare,
AppleTalk, or other protocol suite).
If this object is zero, then the actual target port number is
the default port for the specified 'ppmPortProtocolType' (e.g.,
'chPort9100(11)' uses '9100').
If this object is non-zero, then it SHOULD NOT conflict with the
default (e.g., IANA-registered) target port implied by the value
of 'ppmPortProtocolType' or the explicit transport target port
specified in 'ppmPortServiceNameOrURI'. In case of conflict,
the URI value in 'ppmPortServiceNameOrURI' is authoritative
(e.g., 'ipp://example.com:631/~smith/printer').
If 'ppmPortProtocolType' is 'chLPDServer(8)', then this object
MUST be ignored (because LPR target port is fixed at '515').
Context
- MIB
- PRINTER-PORT-MONITOR-MIB
- OID
.1.3.6.1.4.1.2699.1.2.1.3.1.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ppmPortEntry
- Table
- ppmPortTable
- Siblings
- 8
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ppmPortIndex A locally unique identifier for this printer port when appended
to the value of 'ppmPrinterIndex' for this printer port. The
value of this object SHOULD be preserved (for each po… | column | Integer32 | .1.3.6.1.4.1.2699.1.2.1.3.1.1.1 |
| ppmPortEnabled The current administrative configuration mode for this port.
If this object is 'false', then applications MUST NOT attempt
installation of this port and SHOULD NOT attempt print j… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2699.1.2.1.3.1.1.2 |
| ppmPortName A user friendly name for this port that may be used to
facilitate user selection of a port on a multi-port network
system, in the locale specified by 'ppmGeneralNaturalLanguage'.
… | column | OctetString | .1.3.6.1.4.1.2699.1.2.1.3.1.1.3 |
| ppmPortServiceNameOrURI The service name or URI for this port, specified in UTF-8 (RFC
3629), in the locale specified by 'ppmGeneralNaturalLanguage'.
The service name is typically a queue name.
… | column | OctetString | .1.3.6.1.4.1.2699.1.2.1.3.1.1.4 |
| ppmPortProtocolType The protocol type of this printer port, specified as a value
from 'PrtChannelTypeTC' in the IANA Printer MIB (e.g.,
'chLPDServer(8)' for LPR (RFC 1179) or 'chPort9100(11)' for
Raw… | column | Integer32 | .1.3.6.1.4.1.2699.1.2.1.3.1.1.5 |
| ppmPortProtocolAltSourceEnabled The alternate transport source port mode for this protocol.
If this object is 'true', then transport source ports outside
the standard range MAY be used (e.g., LPR … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2699.1.2.1.3.1.1.7 |
| ppmPortPrtChannelIndex The value of 'prtChannelIndex' in IETF Printer MIB
(RFC 1759/3805) that corresponds to this printer port, or zero
if not specified.
Compatibility Note: The value o… | column | Integer32 | .1.3.6.1.4.1.2699.1.2.1.3.1.1.8 |
| ppmPortLprByteCountEnabled The current LPR byte counting mode for this port if applicable.
If the value of 'ppmPortProtocolType' is NOT 'chLPDServer(8)',
then monitoring applications MUST ign… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2699.1.2.1.3.1.1.9 |