ipPolicyRuleSrcAddrWild

POLICY-MIB · .1.3.6.1.4.1.81.36.2.1.5

Object

column r/w RFC1155-SMIIpAddress

This field specifies the wildcard of the source IP address.
Note that a the mask for a single host is 0.0.0.0 and the mask for all
hosts is 255.255.255.255. This field can has any combination of bits 
set allowing all kind of rules.
For example ipPolicyRuleSrcAddr=192.168.0.254, ipPolicyRuleSrcAddrWild=0.0.255.0
matches all packets with source ip address 192.168.*.254

Context

MIB: POLICY-MIB
OID: .1.3.6.1.4.1.81.36.2.1.5
Type: column
Access: readwrite
Status: current
Parent: ipPolicyRuleEntry
Table: ipPolicyRuleTable
Siblings: 34

Syntax

RFC1155-SMIIpAddress

Source: RFC1155-SMIIpAddress
Base type: OctetString

Values & Constraints

Type Constraints

range: 4

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ipPolicyRuleSlot The EntID-id (AKA module-id / box number) to which this rule relates	column	Integer32	`.1.3.6.1.4.1.81.36.2.1.1`
ipPolicyRuleL4SrcPortMax The maximal source port number. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) or UDP(17). In all other cases its values is not used.	column	Integer32	`.1.3.6.1.4.1.81.36.2.1.10`
ipPolicyRuleL4DestPortMin The minimal destination port number. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) or UDP(17). In all other cases its values is not used.	column	Integer32	`.1.3.6.1.4.1.81.36.2.1.11`
ipPolicyRuleL4DestPortMax The maximal destination port number. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) or UDP(17). In all other cases its value is not used.	column	Integer32	`.1.3.6.1.4.1.81.36.2.1.12`
ipPolicyRuleEstablished This field indicates the value of the established bit in the TCP header. If protocol is not TCP this values should not be used.	column	Enumeration	`.1.3.6.1.4.1.81.36.2.1.13`
ipPolicyRuleOperation The operation that should be applied to a packet in case the packet does not match any of the user specified rules. Values pertains to ACL or QoS depending on List type. This fiel…	column	Integer32	`.1.3.6.1.4.1.81.36.2.1.14`
ipPolicyRuleApplicabilityPrecedence This field indicates how important is it to enforce this rule. The higher the number the more important it is to enforce this rule. The value 9999 has a special meaning of Mandato…	column	Integer32	`.1.3.6.1.4.1.81.36.2.1.15`
ipPolicyRuleApplicabilityStatus obsolete Used to monitor if a rule is currently applicable (for the active list)or would be applicable (if the list becomes active). The applicability context is that of the first entry fo…	column	Enumeration	`.1.3.6.1.4.1.81.36.2.1.16`
ipPolicyRuleApplicabilityType obsolete Used to monitor the ApplicabilityStatus of the rule in the context of this list. The values returned for this MIB are not affected by the list status (active/inactive) …	column	Enumeration	`.1.3.6.1.4.1.81.36.2.1.17`
ipPolicyRuleErrMsg obsolete Free text describing the reason why the rule is not Applicable. When rule is Applicable returns NULL string. The values returned for this MIB are not affected by the list status …	column	OctetString	`.1.3.6.1.4.1.81.36.2.1.18`
ipPolicyRuleStatus Used to configure and monitor one rule. Use CreateAndWait (4) to create a rule. Destroy (6) to destroy a rule active (1) is returned when a rule is complete and is configured …	column	RowStatus	`.1.3.6.1.4.1.81.36.2.1.19`
ipPolicyRuleListID The ID of the list this rule is part of. Derived from list range. See ipPolicyListID MIB.	column	Integer32	`.1.3.6.1.4.1.81.36.2.1.2`
ipPolicyRuleDSCPOperation obsolete The New DSCP value that should be applied to packets that meatch this rule. A value of 64 means no change.	column	Integer32	`.1.3.6.1.4.1.81.36.2.1.20`
ipPolicyRuleDSCPFilter A DSCP value to match against. This filter can be used instead or with the DSCP implicit mapping table. This filter is used in combination with ipPolicyRuleDSCPFilterWild to m…	column	Integer32	`.1.3.6.1.4.1.81.36.2.1.21`
ipPolicyRuleDSCPFilterWild A bitmask wildcard to match bits in the Diff-Serv byte. '1' bits are part of the comparison. '0' bits are 'don't care'. A value of 63 means match all bits. A value of 0 means do…	column	Integer32	`.1.3.6.1.4.1.81.36.2.1.22`
ipPolicyRuleIcmpTypeCode The ICMP type and code to which this rule relates. If protocol is not ICMP this values should not be used. Field format: - 19 bits filed. - MSB (bit 18) stand for n…	column	Enumeration	`.1.3.6.1.4.1.81.36.2.1.23`
ipPolicyRuleSrcAddrNot Logical NOT of the source-IP or source policy user name field. Packets with source IPs or source policy user name which do NOT match the IP address & wildcard or source policy use…	column	Enumeration	`.1.3.6.1.4.1.81.36.2.1.24`
ipPolicyRuleDstAddrNot Logical NOT of the destination-IP field or destination policy user name. Packets with destination IPs or destination policy user name which do NOT match the IP address & wildcard …	column	Enumeration	`.1.3.6.1.4.1.81.36.2.1.25`
ipPolicyRuleProtocolNot Logical NOT of the IP protocol field.	column	Enumeration	`.1.3.6.1.4.1.81.36.2.1.26`
ipPolicyRuleL4SrcPortNot Logical NOT of the tcp source port settings.	column	Enumeration	`.1.3.6.1.4.1.81.36.2.1.27`
ipPolicyRuleL4DestPortNot Logical NOT of the tcp destination port settings.	column	Enumeration	`.1.3.6.1.4.1.81.36.2.1.28`
ipPolicyRuleIcmpTypeCodeNot Logical NOT of the protocol field + ICMP type and code.	column	Enumeration	`.1.3.6.1.4.1.81.36.2.1.29`
ipPolicyRuleID Number of rule within its list. Each list may contain many rule. Lists work in a First Match manner. A rule with a lower ID would be preferred over a rule with a higher ID.	column	Integer32	`.1.3.6.1.4.1.81.36.2.1.3`
ipPolicyRuleSrcPolicyUserGroupName Source user group's policy name. Identical to ugPolicyName MIB. ipPolicyRuleSrcAddr and ipPolicyRuleSrcAddrWild MIBs should be cleared when this value sets and vise versa.	column	OctetString	`.1.3.6.1.4.1.81.36.2.1.30`
ipPolicyRuleDstPolicyUserGroupName Destination user group's policy name. Identical to ugPolicyName MIB. ipPolicyRuleDstAddr and ipPolicyRuleDstAddrWild MIBs should be cleared when this value sets and vise versa.	column	OctetString	`.1.3.6.1.4.1.81.36.2.1.31`
ipPolicyRuleDSCPFilterNot Logical NOT of DSCP filter settings.	column	Enumeration	`.1.3.6.1.4.1.81.36.2.1.32`
ipPolicyRuleDescription IP rule description field. Allowing the user to specify the description for each rule. In Crypto list a rule equals a tunnel and therefore the description is of the tunnel. There …	column	OctetString	`.1.3.6.1.4.1.81.36.2.1.33`
ipPolicyRuleFragment This field indicates whether the rule will apply to non-initial fragments only. When this key is set the L4 information is removed.	column	Enumeration	`.1.3.6.1.4.1.81.36.2.1.34`
ipPolicyRuleDoSClass Enumerated description of DoS attack this correspondingly defends from. Presently the DoS description is used for classification of DoS attacks in the MSS notificat…	column	Enumeration	`.1.3.6.1.4.1.81.36.2.1.35`
ipPolicyRuleSrcAddr The IP address of the source station. A value of 255.255.255.255 in ipPolicyRuleSrcAddrWild indicates this is a DON'T CARE field.	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.81.36.2.1.4`
ipPolicyRuleDstAddr The IP address of the destination station. A value of 255.255.255.255 in ipPolicyRuleDstAddrWild indicates this is a DON'T CARE field.	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.81.36.2.1.6`
ipPolicyRuleDstAddrWild This field specifies the wildcard of the destination IP address. Note that a the mask for a single host is 0.0.0.0 and the mask for all hosts is 255.255.255.255. This field can h…	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.81.36.2.1.7`
ipPolicyRuleProtocol The IP protocol to which this rule relates. Use 256 to specify any IP (i.e. don't care)	column	Integer32	`.1.3.6.1.4.1.81.36.2.1.8`
ipPolicyRuleL4SrcPortMin The minimal source port number. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) UDP(17). In all other cases its values is not used.	column	Integer32	`.1.3.6.1.4.1.81.36.2.1.9`