ipPolicyRuleDstAddrWild

POLICY-MIB · .1.3.6.1.4.1.81.36.2.1.7
MIB view Table view

Object

column r/w RFC1155-SMIIpAddress 
This field specifies the wildcard of the destination IP address.
Note that a the mask for a single host is 0.0.0.0 and the mask for 
all hosts is 255.255.255.255. This field can has any combination of 
bits set allowing all kind of rules.
For example ipPolicyRuleDstAddr=192.168.0.254, ipPolicyRuleDstAddrWild=0.0.255.0
matches all packets with destination ip address 192.168.*.254

Context

MIB
POLICY-MIB
OID
.1.3.6.1.4.1.81.36.2.1.7
Type
column
Access
readwrite
Status
current
Parent
ipPolicyRuleEntry
Table
ipPolicyRuleTable
Siblings
34

Syntax

RFC1155-SMIIpAddress
Source
RFC1155-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ipPolicyRuleSlot
The EntID-id (AKA module-id / box number) to which this rule relates
columnInteger32.1.3.6.1.4.1.81.36.2.1.1
ipPolicyRuleL4SrcPortMax
The maximal source port number. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) or UDP(17). In all other cases its values is not used.
columnInteger32.1.3.6.1.4.1.81.36.2.1.10
ipPolicyRuleL4DestPortMin
The minimal destination port number. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) or UDP(17). In all other cases its values is not used.
columnInteger32.1.3.6.1.4.1.81.36.2.1.11
ipPolicyRuleL4DestPortMax
The maximal destination port number. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) or UDP(17). In all other cases its value is not used.
columnInteger32.1.3.6.1.4.1.81.36.2.1.12
ipPolicyRuleEstablished
This field indicates the value of the established bit in the TCP header. If protocol is not TCP this values should not be used.
columnEnumeration.1.3.6.1.4.1.81.36.2.1.13
ipPolicyRuleOperation
The operation that should be applied to a packet in case the packet does not match any of the user specified rules. Values pertains to ACL or QoS depending on List type. This fiel…
columnInteger32.1.3.6.1.4.1.81.36.2.1.14
ipPolicyRuleApplicabilityPrecedence
This field indicates how important is it to enforce this rule. The higher the number the more important it is to enforce this rule. The value 9999 has a special meaning of Mandato…
columnInteger32.1.3.6.1.4.1.81.36.2.1.15
ipPolicyRuleApplicabilityStatus obsolete
Used to monitor if a rule is currently applicable (for the active list)or would be applicable (if the list becomes active). The applicability context is that of the first entry fo…
columnEnumeration.1.3.6.1.4.1.81.36.2.1.16
ipPolicyRuleApplicabilityType obsolete
Used to monitor the ApplicabilityStatus of the rule in the context of this list. The values returned for this MIB are not affected by the list status (active/inactive) …
columnEnumeration.1.3.6.1.4.1.81.36.2.1.17
ipPolicyRuleErrMsg obsolete
Free text describing the reason why the rule is not Applicable. When rule is Applicable returns NULL string. The values returned for this MIB are not affected by the list status …
columnOctetString.1.3.6.1.4.1.81.36.2.1.18
ipPolicyRuleStatus
Used to configure and monitor one rule. Use CreateAndWait (4) to create a rule. Destroy (6) to destroy a rule active (1) is returned when a rule is complete and is configured …
columnRowStatus.1.3.6.1.4.1.81.36.2.1.19
ipPolicyRuleListID
The ID of the list this rule is part of. Derived from list range. See ipPolicyListID MIB.
columnInteger32.1.3.6.1.4.1.81.36.2.1.2
ipPolicyRuleDSCPOperation obsolete
The New DSCP value that should be applied to packets that meatch this rule. A value of 64 means no change.
columnInteger32.1.3.6.1.4.1.81.36.2.1.20
ipPolicyRuleDSCPFilter
A DSCP value to match against. This filter can be used instead or with the DSCP implicit mapping table. This filter is used in combination with ipPolicyRuleDSCPFilterWild to m…
columnInteger32.1.3.6.1.4.1.81.36.2.1.21
ipPolicyRuleDSCPFilterWild
A bitmask wildcard to match bits in the Diff-Serv byte. '1' bits are part of the comparison. '0' bits are 'don't care'. A value of 63 means match all bits. A value of 0 means do…
columnInteger32.1.3.6.1.4.1.81.36.2.1.22
ipPolicyRuleIcmpTypeCode
The ICMP type and code to which this rule relates. If protocol is not ICMP this values should not be used. Field format: - 19 bits filed. - MSB (bit 18) stand for n…
columnEnumeration.1.3.6.1.4.1.81.36.2.1.23
ipPolicyRuleSrcAddrNot
Logical NOT of the source-IP or source policy user name field. Packets with source IPs or source policy user name which do NOT match the IP address & wildcard or source policy use…
columnEnumeration.1.3.6.1.4.1.81.36.2.1.24
ipPolicyRuleDstAddrNot
Logical NOT of the destination-IP field or destination policy user name. Packets with destination IPs or destination policy user name which do NOT match the IP address & wildcard …
columnEnumeration.1.3.6.1.4.1.81.36.2.1.25
ipPolicyRuleProtocolNot
Logical NOT of the IP protocol field.
columnEnumeration.1.3.6.1.4.1.81.36.2.1.26
ipPolicyRuleL4SrcPortNot
Logical NOT of the tcp source port settings.
columnEnumeration.1.3.6.1.4.1.81.36.2.1.27
ipPolicyRuleL4DestPortNot
Logical NOT of the tcp destination port settings.
columnEnumeration.1.3.6.1.4.1.81.36.2.1.28
ipPolicyRuleIcmpTypeCodeNot
Logical NOT of the protocol field + ICMP type and code.
columnEnumeration.1.3.6.1.4.1.81.36.2.1.29
ipPolicyRuleID
Number of rule within its list. Each list may contain many rule. Lists work in a First Match manner. A rule with a lower ID would be preferred over a rule with a higher ID.
columnInteger32.1.3.6.1.4.1.81.36.2.1.3
ipPolicyRuleSrcPolicyUserGroupName
Source user group's policy name. Identical to ugPolicyName MIB. ipPolicyRuleSrcAddr and ipPolicyRuleSrcAddrWild MIBs should be cleared when this value sets and vise versa.
columnOctetString.1.3.6.1.4.1.81.36.2.1.30
ipPolicyRuleDstPolicyUserGroupName
Destination user group's policy name. Identical to ugPolicyName MIB. ipPolicyRuleDstAddr and ipPolicyRuleDstAddrWild MIBs should be cleared when this value sets and vise versa.
columnOctetString.1.3.6.1.4.1.81.36.2.1.31
ipPolicyRuleDSCPFilterNot
Logical NOT of DSCP filter settings.
columnEnumeration.1.3.6.1.4.1.81.36.2.1.32
ipPolicyRuleDescription
IP rule description field. Allowing the user to specify the description for each rule. In Crypto list a rule equals a tunnel and therefore the description is of the tunnel. There …
columnOctetString.1.3.6.1.4.1.81.36.2.1.33
ipPolicyRuleFragment
This field indicates whether the rule will apply to non-initial fragments only. When this key is set the L4 information is removed.
columnEnumeration.1.3.6.1.4.1.81.36.2.1.34
ipPolicyRuleDoSClass
Enumerated description of DoS attack this correspondingly defends from. Presently the DoS description is used for classification of DoS attacks in the MSS notificat…
columnEnumeration.1.3.6.1.4.1.81.36.2.1.35
ipPolicyRuleSrcAddr
The IP address of the source station. A value of 255.255.255.255 in ipPolicyRuleSrcAddrWild indicates this is a DON'T CARE field.
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.81.36.2.1.4
ipPolicyRuleSrcAddrWild
This field specifies the wildcard of the source IP address. Note that a the mask for a single host is 0.0.0.0 and the mask for all hosts is 255.255.255.255. This field can has any…
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.81.36.2.1.5
ipPolicyRuleDstAddr
The IP address of the destination station. A value of 255.255.255.255 in ipPolicyRuleDstAddrWild indicates this is a DON'T CARE field.
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.81.36.2.1.6
ipPolicyRuleProtocol
The IP protocol to which this rule relates. Use 256 to specify any IP (i.e. don't care)
columnInteger32.1.3.6.1.4.1.81.36.2.1.8
ipPolicyRuleL4SrcPortMin
The minimal source port number. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) UDP(17). In all other cases its values is not used.
columnInteger32.1.3.6.1.4.1.81.36.2.1.9