ipPolicyQueryIcmpTypeCode

POLICY-MIB · .1.3.6.1.4.1.81.36.5.1.16
MIB view Table view

Object

column r/w Enumeration 
Simulated packet ICMP type and code.
If protocol is not ICMP this values should not be used.
              
Field format:
- 19 bits filed.
- MSB (bit 18) stand for not-supported.
- Bit 17 stands for any ICMP type.
- Bit 16 stands for any ICMP code.
- Bits 8-15 stand for ICMP type.
- Bits 0-7 stand for ICMP code.
For example:
- not-supported(262144) = 0x40000
- any(196608) = 0x30000
- ICMP type unreachable(66304), code any = 0x10300
- ICMP type & code host-unreachable(769) = 0x301

Context

MIB
POLICY-MIB
OID
.1.3.6.1.4.1.81.36.5.1.16
Type
column
Access
readwrite
Status
current
Parent
ipPolicyQueryEntry
Table
ipPolicyQueryTable
Siblings
21

Syntax

Enumeration

Values & Constraints

Enumerated Values
0echo-reply
768netwrok-unreachable
769host-unreachable
770protocol-unreachable
771port-unreachable
772fragmentation-needed-but-df-bit-set
773source-route-failed
774destination-network-unknown
775destination-host-unknown
777destination-network-admin-prohibited
779network-unreachable-for-tos
780host-unreachable-for-tos
781communication-admin-prohibited-filtering
782host-precedence-violation
783precedence-cutoff-in-effect
1024source-quench
1280redirect-for-network
1283redirect-for-type-of-service-and-host
2048echo-request
2304router-advertisement
2817time-to-live-equals-0-during-reassembly
3072bad-ip-header
3073required-option-missing
3328timestamp-requested
3584timestamp-reply
4352address-mask-request
4608address-mask-reply
7680traceroute-outbound-packet-successfully-fw
7681traceroute-no-route-for-outbound-packet
9472domain-name-request
9728domain-name-reply
9984skip-algorithm-discovery-protocol
66304unreachable
66816redirect
68352time-exceeded
68608parameters-problem
73216traceroute
73472conversion-errors
73728mobile-host-redirect
73984ipv6-where-are-you
74240ipv6-I-am-here
74496mobile-registration-request
74752mobile-registration-reply
75776security-failure
196608any
262144not-supported

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ipPolicyQuerySlot
The EntID-id (AKA module-id / box number) to which this rule relates
columnInteger32.1.3.6.1.4.1.81.36.5.1.1
ipPolicyQueryOperation
The operation that would be applied to the simulated packet. This field points to the appropriate ipPolicyCompositeOpID in ipPolicyCompositeOpTable. The following read-only rows…
columnInteger32.1.3.6.1.4.1.81.36.5.1.10
ipPolicyQueryRuleID
ID of the rule of the list that resulted in the ipPolicyQueryOperation for the query. A value of 0 means that ipPolicyQueryOperation is a result of the ipPolicyListDefaultOperatio…
columnInteger32.1.3.6.1.4.1.81.36.5.1.11
ipPolicyQueryDSCPOperation
The New DSCP value that of the simulated packet A value of 64 means the DSCP field will not be changed. A value of 65 means this query can't be processed.
columnInteger32.1.3.6.1.4.1.81.36.5.1.12
ipPolicyQueryPriority
The 802.1p priority in the simulated packet. When the priority is dontCare, the result maybe forwardNoChange.
columnEnumeration.1.3.6.1.4.1.81.36.5.1.13
ipPolicyQueryIfIndex
This variable should be made equal to the ifIndex of the interface for which this query should be resolved. The value of 0 means the context of the first entry in the ipPolicyActi…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.81.36.5.1.14
ipPolicyQuerySubContext
The direction for which this query should be resolved: ingress(1)- going into the interface, from the network egress(2) - going out of the interface, towards the network
columnSubContextTypes.1.3.6.1.4.1.81.36.5.1.15
ipPolicyQueryIpFragments
Simulate fragment packet.
columnEnumeration.1.3.6.1.4.1.81.36.5.1.17
ipPolicyQueryIpOption
Simulate IP option packet.
columnTruthValue.1.3.6.1.4.1.81.36.5.1.18
ipPolicyQueryAccessOperation
This object reports the Access operation result. This object obsoletes the ipPolicyQueryOperation object.
columnEnumeration.1.3.6.1.4.1.81.36.5.1.19
ipPolicyQueryListID
The ID of the list used to check the simulated packet.
columnInteger32.1.3.6.1.4.1.81.36.5.1.2
ipPolicyQueryNotifyOperation
This object reports the Notify operation result. This object obsoletes the ipPolicyQueryOperation object.
columnEnumeration.1.3.6.1.4.1.81.36.5.1.20
ipPolicyQueryErrorReplyOperation
This object reports the Error Reply operation result. This object obsoletes the ipPolicyQueryOperation object.
columnEnumeration.1.3.6.1.4.1.81.36.5.1.21
ipPolicyQueryCoSOperation
This object reports the CoS (Ethernet=802.1p) operation result. This object obsoletes the ipPolicyQueryOperation object.
columnEnumeration.1.3.6.1.4.1.81.36.5.1.22
ipPolicyQuerySrcAddr
The IP address of the source station in the packet
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.81.36.5.1.3
ipPolicyQueryDstAddr
The IP address of the destination station in the packet
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.81.36.5.1.4
ipPolicyQueryProtocol
The IP protocol in the packet. Use 256 to specify IP (i.e. don't care)
columnInteger32.1.3.6.1.4.1.81.36.5.1.5
ipPolicyQueryL4SrcPort
The source port of the packet. This fields is applicable only when ipPolicyQueryProtocol is TCP(6) or UDP(17). In all other cases its values is not used.
columnInteger32.1.3.6.1.4.1.81.36.5.1.6
ipPolicyQueryL4DestPort
The destination port of the packet. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) or UDP(17). In all other cases its values is not used.
columnInteger32.1.3.6.1.4.1.81.36.5.1.7
ipPolicyQueryEstablished
The value of the TCP Establish bit in simulated packet. This fields is applicable only when ipPolicyQueryProtocol is TCP(6)
columnEnumeration.1.3.6.1.4.1.81.36.5.1.8
ipPolicyQueryDSCP
The DSCP value in the simulated packet. The value 64 is used to specify DONT CARE. In this case the result maybe forwardNoChange If a specifc value is specified the result woul…
columnInteger32.1.3.6.1.4.1.81.36.5.1.9