pnniRouteAddrType

PNNI-MIB · .1.3.6.1.4.1.353.5.4.1.1.19.4.1.7
MIB view Table view

Object

column r/w Enumeration 
The type (e.g. internal or exterior) of reachability from
the advertising node to the address prefix.
              
Reject(2) refers to an address prefix which, if matched,
indicates that the message should be discarded as
unreachable. This is used in some protocols as a means of
correctly aggregating routes.

Context

MIB
PNNI-MIB
OID
.1.3.6.1.4.1.353.5.4.1.1.19.4.1.7
Type
column
Access
readwrite
Status
current
Parent
pnniRouteAddrEntry
Table
pnniRouteAddrTable
Siblings
16

Syntax

Enumeration

Values & Constraints

Enumerated Values
1other
2reject
3internal
4exterior

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pnniRouteAddrAddress
The value of the ATM End System Address prefix.
columnAtmAddrPrefix.1.3.6.1.4.1.353.5.4.1.1.19.4.1.1
pnniRouteAddrVPCapability
Indicates whether VPCs can be established from the advertising node to the reachable address prefix.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.353.5.4.1.1.19.4.1.10
pnniRouteAddrMetricsTag
The index into the pnniMetricsTable for the traffic parameter values that apply for the connectivity from the advertising node to the reachable address prefix. There will be one …
columnPnniMetricsTag.1.3.6.1.4.1.353.5.4.1.1.19.4.1.11
pnniRouteAddrPtseId
For reachable addresses learned via PNNI, this attribute contains the value of the PTSE Identifier for the PTSE being originated by the originating node which contains the informa…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.353.5.4.1.1.19.4.1.12
pnniRouteAddrOriginateAdvertisement
Whether or not the reachable address specified by this entry is to be advertised by the local node into its PNNI routing domain. This object may only take on the va…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.353.5.4.1.1.19.4.1.13
pnniRouteAddrInfo
A reference to MIB definitions specific to the particular routing protocol which is responsible for this reachable address prefix, as determined by the value specified in the rout…
columnObjectIdentifier.1.3.6.1.4.1.353.5.4.1.1.19.4.1.14
pnniRouteAddrOperStatus
Indicates whether the reachable address prefix is operationally valid and whether it is being advertised by this node.
columnEnumeration.1.3.6.1.4.1.353.5.4.1.1.19.4.1.15
pnniRouteAddrTimeStamp
Indicates when the connectivity from the advertising node to the reachable address prefix became known to the local node.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.353.5.4.1.1.19.4.1.16
pnniRouteAddrRowStatus
To create, delete, activate and de-activate a reachable address prefix.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.353.5.4.1.1.19.4.1.17
pnniRouteAddrPrefixLength
The prefix length to be applied to the ATM End System Address prefix.
columnPnniPrefixLength.1.3.6.1.4.1.353.5.4.1.1.19.4.1.2
pnniRouteAddrIndex
An index into the set of listings of connectivity to a given address prefix from a given local node.
columnInteger32.1.3.6.1.4.1.353.5.4.1.1.19.4.1.3
pnniRouteAddrIfIndex
The local interface over which the reachable address can be reached. The value zero indicates an unknown interface or reachability through a remote node. This obje…
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.353.5.4.1.1.19.4.1.4
pnniRouteAddrAdvertisingNodeId
The node ID of a node advertising reachability to the address prefix. If the local node index is zero, then the advertising node ID must be set to all zeros.
columnPnniNodeId.1.3.6.1.4.1.353.5.4.1.1.19.4.1.5
pnniRouteAddrAdvertisedPortId
The port identifier used from the advertising node to reach the given address prefix.
columnPnniPortId.1.3.6.1.4.1.353.5.4.1.1.19.4.1.6
pnniRouteAddrProto
The routing mechanism via which the connectivity from the advertising node to the reachable address prefix was learned.
columnEnumeration.1.3.6.1.4.1.353.5.4.1.1.19.4.1.8
pnniRouteAddrPnniScope
The PNNI scope of advertisement (i.e. level of PNNI hierarchy) of the reachability from the advertising node to the address prefix.
columnPnniLevel.1.3.6.1.4.1.353.5.4.1.1.19.4.1.9