pnniNodeLowest
PNNI-MIB ·
.1.3.6.1.4.1.353.5.4.1.1.2.1.4
Object
Indicates whether this node acts as a lowest level node or
whether this node is a logical group node that becomes
active when one of the other nodes in this switching system
becomes a peer group leader. The value 'false' must not be
used with nodes that are not PGL/LGN capable.
This object may only be
written when pnniNodeAdminStatus has the value down.
Context
- MIB
- PNNI-MIB
- OID
.1.3.6.1.4.1.353.5.4.1.1.2.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pnniNodeEntry
- Table
- pnniNodeTable
- Siblings
- 14
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pnniNodeIndex A value assigned to a node in this switching system that
uniquely identifies it in the MIB. | column | PnniNodeIndex | .1.3.6.1.4.1.353.5.4.1.1.2.1.1 |
| pnniNodeRestrictedTransit Specifies whether the node is restricted to not allowing
support of SVCs transiting this node. This attribute
determines the setting of the restricted transit bit in the
nodal in… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.4.1.1.2.1.10 |
| pnniNodeComplexRep Specifies whether this node uses the complex node
representation. A value of `true' indicates that the
complex node representation is used, whereas a value of
`false' indicates t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.4.1.1.2.1.11 |
| pnniNodeRestrictedBranching Indicates whether the node is able to support additional
point-to-multipoint branches. A value of 'false' indicates
that additional branches can be supported, and a value of
'tru… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.4.1.1.2.1.12 |
| pnniNodeDatabaseOverload Specifies whether the node is currently operating in
topology database overload state. This attribute has the
same value as the Non-transit for PGL Election bit in the
nodal info… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.4.1.1.2.1.13 |
| pnniNodePtses Gauges the total number of PTSEs currently in this
node's topology database(s). | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.4.1.1.2.1.14 |
| pnniNodeRowStatus To create, delete, activate and de-activate a Node. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.353.5.4.1.1.2.1.15 |
| pnniNodeLevel The level of PNNI hierarchy at which this node exists. This
attribute is used to determine the default node ID and the
default peer group ID for this node. This object may only
be… | column | PnniLevel | .1.3.6.1.4.1.353.5.4.1.1.2.1.2 |
| pnniNodeId The value the switching system is using to represent
itself as this node. This object may only be written when
pnniNodeAdminStatus has the value down.
If pnniNodeLo… | column | PnniNodeId | .1.3.6.1.4.1.353.5.4.1.1.2.1.3 |
| pnniNodeAdminStatus Indicates whether the administrative status of the node is
up (the node is allowed to become active) or down (the node
is forced to be inactive).
When pnniNodeAdmin… | column | Enumeration | .1.3.6.1.4.1.353.5.4.1.1.2.1.5 |
| pnniNodeOperStatus Indicates whether the node is active or whether the node
has yet to become operational. When the value is down, all
state has been cleared from the node and the node is not
commu… | column | Enumeration | .1.3.6.1.4.1.353.5.4.1.1.2.1.6 |
| pnniNodeDomainName The name of the PNNI routing
domain in which this node participates. All lowest-level
PNNI nodes with the same pnniNodeDomainName are presumed to
be connected. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.353.5.4.1.1.2.1.7 |
| pnniNodeAtmAddress This node's ATM End System Address. Remote systems wishing
to exchange PNNI protocol packets with this node should
direct packets or calls to this address.
This at… | column | PnniAtmAddr | .1.3.6.1.4.1.353.5.4.1.1.2.1.8 |
| pnniNodePeerGroupId The Peer Group Identifier of the peer group that the given
node is to become a member of.
The default value of this attribute has the first octet
equal to pnniNodeL… | column | PnniPeerGroupId | .1.3.6.1.4.1.353.5.4.1.1.2.1.9 |