pktcMtaDevEnabled
PKTC-IETF-MTA-MIB ·
.1.3.6.1.2.1.140.1.1.6
Object
This object contains the MTA Admin Status of this device.
If this object is set to 'true', the MTA is
administratively enabled, and the MTA MUST be able to
interact with the PacketCable entities, such as CMS,
Provisioning Server, KDC, and other MTAs and MGs on all
PacketCable interfaces.
If this object is set to 'false', the MTA is
administratively disabled, and the MTA MUST perform the
following actions for all endpoints:
- Shut down all media sessions, if present.
- Shut down Network Control Signaling (NCS)
signaling by following the Restart in
Progress procedures in the PacketCable NCS
specification.
The MTA must execute all actions required to
enable or disable the telephony services for all
endpoints immediately upon receipt of an SNMP SET
operation.
Additionally, the MTA MUST maintain the SNMP Interface
for management and also the SNMP Key management interface.
Also, the MTA MUST NOT continue Kerberized key management
with CMSes until this object is set to 'true'.
Note: MTAs MUST renew the CMS Kerberos tickets according
to the PacketCable Security or IPCablecom Specification.
If a value is written into an instance of
pktcMtaDevEnabled, the agent MUST NOT retain the supplied
value across MTA re-initializations or reboots.
Context
- MIB
- PKTC-IETF-MTA-MIB
- OID
.1.3.6.1.2.1.140.1.1.6- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- pktcMtaDevBase
- Siblings
- 11
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktcMtaDevResetNow This object controls the MTA software reset.
Reading this object always returns 'false'. Setting this
object to 'true' causes the device to reset immediately
and the following ac… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.140.1.1.1 |
| pktcMtaDevProvisioningTimer This object defines the time interval for the provisioning
flow to complete. The MTA MUST finish all provisioning
operations starting from the moment when an MTA receives
its DHC… | scalar | minutes Unsigned32 | .1.3.6.1.2.1.140.1.1.10 |
| pktcMtaDevProvisioningCounter This object counts the number of times the
provisioning cycle has looped through step MTA-1. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.2.1.140.1.1.11 |
| pktcMtaDevErrorOidsTable This table contains the list of configuration errors or
warnings the MTA encountered when parsing the
configuration file it received from the Provisioning
Server.
For each error, … | table | - | .1.3.6.1.2.1.140.1.1.12 |
| pktcMtaDevSerialNumber This object specifies the manufacturer's serial
number of this MTA. The value of this object MUST be
identical to the value specified in DHCP option 43,
sub-option 4. The list o… | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.140.1.1.2 |
| pktcMtaDevSwCurrentVers This object identifies the software version currently
operating in the MTA.
The MTA MUST return a string descriptive of the current
software load. This object should use the synt… | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.140.1.1.3 |
| pktcMtaDevFQDN This object contains the Fully Qualified Domain Name for
this MTA. The MTA FQDN is used to uniquely identify the
device to the PacketCable back office elements. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.140.1.1.4 |
| pktcMtaDevEndPntCount This object contains the number of physical endpoints for
this MTA. | scalar | Unsigned32 | .1.3.6.1.2.1.140.1.1.5 |
| pktcMtaDevTypeIdentifier This object provides the MTA device type identifier. The
value of this object must be a copy of the DHCP option 60
value exchanged between the MTA and the DHCP server. The
DHCP … | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.140.1.1.7 |
| pktcMtaDevProvisioningState This object indicates the completion state of the MTA
device provisioning process.
pass:
If the configuration file could be parsed successfully
and the MTA is able to r… | scalar | Enumeration | .1.3.6.1.2.1.140.1.1.8 |
| pktcMtaDevHttpAccess This object indicates whether the HTTP protocol is
supported for the MTA configuration file transfer. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.140.1.1.9 |