radiusNasSpecifyIpAddress
PERLE-MCR-MGT-MIB ·
.1.3.6.1.4.1.1966.21.1.1.1.2.4.8.14
Object
Specify the unique IPv4 address that NAS Identifier will use
Context
- MIB
- PERLE-MCR-MGT-MIB
- OID
.1.3.6.1.4.1.1966.21.1.1.1.2.4.8.14- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- radiusGroup
- Siblings
- 15
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| radiusStatus When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the contai… | scalar | ContainerStatus | .1.3.6.1.4.1.1966.21.1.1.1.2.4.8.1 |
| radiusRetryLimit The number of times the management module tries
to connect to the RADIUS server before erroring
out. Valid values are 0-255. The default is 5. | scalar | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.2.4.8.10 |
| radiusTimeout The time, in seconds, that the management module waits
to receive a reply after sending out a request to
a RADIUS accounting or authentication host. If no
reply is received before… | scalar | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.2.4.8.11 |
| radiusNasIdentifier The NAS identifier name.
To delete this , set this field to blank. | scalar | OctetString | .1.3.6.1.4.1.1966.21.1.1.1.2.4.8.12 |
| radiusNasIpAddress When on, the NAS Identifier obtains ipv4 address automatically.
Default is on. | scalar | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.2.4.8.13 |
| radiusNasIpv6Address When on, the NAS Identifier obtains ipv6 address automatically.
Default is on. | scalar | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.2.4.8.15 |
| radiusNasSpecifyIpv6Address Specify the unique IPv6 address that NAS Identifier will use | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1966.21.1.1.1.2.4.8.16 |
| radiusPrimaryAuthHost Primary Radius Authentication Host | scalar | OctetString | .1.3.6.1.4.1.1966.21.1.1.1.2.4.8.2 |
| radiusSecondaryAuthHost Secondary Radius Authentication Host | scalar | OctetString | .1.3.6.1.4.1.1966.21.1.1.1.2.4.8.3 |
| radiusAuthenticationPort The port that the RADIUS host listens to for
authentication requests. The default port is 1812. | scalar | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.2.4.8.4 |
| radiusAccounting Radius Accounting | scalar | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.2.4.8.5 |
| radiusPrimaryAcctHost Name of the primary RADIUS authentication host. | scalar | OctetString | .1.3.6.1.4.1.1966.21.1.1.1.2.4.8.6 |
| radiusSecondaryAcctHost Name of the secondary RADIUS authentication host. | scalar | OctetString | .1.3.6.1.4.1.1966.21.1.1.1.2.4.8.7 |
| radiusAccountingPort The port that the RADIUS host listens to for
accounting requests. The default port is 1813. | scalar | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.2.4.8.8 |
| radiusAcctAuth Radius Accounting Authenticator | scalar | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.2.4.8.9 |