mcrMgtResetFactory
PERLE-MCR-MGT-MIB ·
.1.3.6.1.4.1.1966.21.1.1.0.4
Object
notification
Trap being sent indicates that the management module has been manually reset to factory by holding the reset button for 3 or more seconds, or one of the managers. This means that any files downloaded to the management module will be erase and the management configuration file is reset back to the default configuration.
Context
- MIB
- PERLE-MCR-MGT-MIB
- OID
.1.3.6.1.4.1.1966.21.1.1.0.4- Type
- notification
- Status
- current
- Parent
- mcrMGTMIBNotifications
- Siblings
- 246
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mcrMgtModuleInserted Trap being sent indicates that a management module has been inserted int the chassis. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.1 |
| mcrMgtDateTimeChg Trap being sent indicates that the system date and/or time has been changed. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.10 |
| mcrChassisCommTempSensorRecov Trap being sent indicates that communication with the chassis temperature
sensor has recovered. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.100 |
| mcrMediaDetectFail Trap being sent indicates that the indicated media card is being powered
down due to the detection of a hardware failure. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.101 |
| mcrMediaBadImage Trap being sent indicates that the CRC of the media converter module firmware is
incorrect. This can be caused if there is no image on the module or the
image is corrupt. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.102 |
| mcrSfpLostComm Trap being sent indicates that the media converter module's microcode can no longer
communicate with the SFP module. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.103 |
| mcrSfpRecovComm Trap being sent indicates that the media converter module's microcode had previously
lost communication with, but has now regained communication with the SFP
module. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.104 |
| mcrModuleNotSupported Trap being sent indicates that the media converter module is not fully supported by
the management module. Update the management module firmware to rectify
this issue. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.105 |
| mcrModuleFirmwareUpdate Trap being sent indicates that the media converter module firmware is being updated. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.106 |
| mcrSfpPortShutdown Trap being sent indicates that the Sfp/Xfp port has been shutdown due to
high temperature. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.107 |
| mcrSfpPortShutdownRecov Trap being sent indicates that the Sfp/Xfp port shutdown has recovered. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.108 |
| mcrXfpHighApdBiasWarn Trap being sent indicates that an XFP module's APD Bias Current has
exceeded the high APD Bias warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.109 |
| mcrMgtSntpServFail Trap being sent indicates that SNTP is configured and the management module can
not communicate with the configured SNTP server. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.11 |
| mcrXfpHighApdBiasWarnRecov Trap being sent indicates that an XFP module's APD Bias Current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.110 |
| mcrXfpHighApdBiasAlarm Trap being sent indicates that an XFP module's APD Bias Current has
exceeded the high APD Bias alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.111 |
| mcrXfpHighApdBiasAlarmRecov Trap being sent indicates that an XFP module's APD Bias Current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.112 |
| mcrXfpLowApdBiasWarn Trap being sent indicates that an XFP module's APD Bias Current has gone
below the low APD Bias warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.113 |
| mcrXfpLowApdBiasWarnRecov Trap being sent indicates that an XFP module's APD Bias Current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.114 |
| mcrXfpLowApdBiasAlarm Trap being sent indicates that an XFP module's APD Bias Current has gone
below the low APD Bias alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.115 |
| mcrXfpLowApdBiasAlarmRecov Trap being sent indicates that an XFP module's APD Bias Current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.116 |
| mcrXfpHighTecCurrentWarn Trap being sent indicates that an XFP module's TEC Current has
exceeded the high TEC Current warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.117 |
| mcrXfpHighTecCurrentWarnRecov Trap being sent indicates that an XFP module's TEC Current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.118 |
| mcrXfpHighTecCurrentAlarm Trap being sent indicates that an XFP module's TEC Current has
exceeded the high TEC Current alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.119 |
| mcrMgtSntpServRec Trap being sent indicates that the SNTP is configured and the management module
has recovered communications with the configured SNTP server. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.12 |
| mcrXfpHighTecCurrentAlarmRecov Trap being sent indicates that an XFP module's TEC Current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.120 |
| mcrXfpLowTecCurrentWarn Trap being sent indicates that an XFP module's TEC Current has gone
below the low TEC Current warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.121 |
| mcrXfpLowTecCurrentWarnRecov Trap being sent indicates that an XFP module's TEC Current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.122 |
| mcrXfpLowTecCurrentAlarm Trap being sent indicates that an XFP module's TEC Current has gone
below the low TEC Current alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.123 |
| mcrXfpLowTecCurrentAlarmRecov Trap being sent indicates that an XFP module's TEC Current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.124 |
| mcrXfpHighLaserTempWarn Trap being sent indicates that an XFP module's Laser Temperature has
exceeded the high Laser Temperature warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.125 |
| mcrXfpHighLaserTempWarnRecov Trap being sent indicates that an XFP module's Laser Temperature has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.126 |
| mcrXfpHighLaserTempAlarm Trap being sent indicates that an XFP module's Laser Temperature has
exceeded the high Laser Temperature alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.127 |
| mcrXfpHighLaserTempAlarmRecov Trap being sent indicates that an XFP module's Laser Temperature has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.128 |
| mcrXfpLowLaserTempWarn Trap being sent indicates that an XFP module's Laser Temperature has gone
below the low Laser Temperature warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.129 |
| mcrMgtSnmpTrapHostFail Trap being sent indicates that SNMP traps is and the management module
can not communicate with the configured SNMP trap host. This trap will only be
sent for SNMP trap hosts con… | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.13 |
| mcrXfpLowLaserTempWarnRecov Trap being sent indicates that an XFP module's Laser Temperature has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.130 |
| mcrXfpLowLaserTempAlarm Trap being sent indicates that an XFP module's Laser Temperature has gone
below the low Laser Temperature alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.131 |
| mcrXfpLowLaserTempAlarmRecov Trap being sent indicates that an XFP module's Laser Temperature has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.132 |
| mcrXfpHighLaserWavelengthWarn Trap being sent indicates that an XFP module's Laser Wavelength has
exceeded the high Laser Wavelength warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.133 |
| mcrXfpHighLaserWavelengthWarnRecov Trap being sent indicates that an XFP module's Laser Wavelength has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.134 |
| mcrXfpHighLaserWavelengthAlarm Trap being sent indicates that an XFP module's Laser Wavelength has
exceeded the high Laser Wavelength alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.135 |
| mcrXfpHighLaserWavelengthAlarmRecov Trap being sent indicates that an XFP module's Laser Wavelength has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.136 |
| mcrXfpLowLaserWavelengthWarn Trap being sent indicates that an XFP module's Laser Wavelength has gone
below the low Laser Wavelength warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.137 |
| mcrXfpLowLaserWavelengthWarnRecov Trap being sent indicates that an XFP module's Laser Wavelength has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.138 |
| mcrXfpLowLaserWavelengthAlarm Trap being sent indicates that an XFP module's Laser Wavelength has gone
below the low Laser Wavelength alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.139 |
| mcrMgtSnmpTrapHostRec Trap being sent indicates that SNMP traps is and the management module
has recovered communications with the configured SNMP trap host. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.14 |
| mcrXfpLowLaserWavelengthAlarmRecov Trap being sent indicates that an XFP module's Laser Wavelength has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.140 |
| mcrXfpHigh5VoltWarn Trap being sent indicates that an XFP module's +5v supply has
exceeded the high +5v supply warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.141 |
| mcrXfpHigh5VoltWarnRecov Trap being sent indicates that an XFP module's +5v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.142 |
| mcrXfpHigh5VoltAlarm Trap being sent indicates that an XFP module's +5v supply has
exceeded the high +5v supply alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.143 |
| mcrXfpHigh5VoltAlarmRecov Trap being sent indicates that an XFP module's +5v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.144 |
| mcrXfpLow5VoltWarn Trap being sent indicates that an XFP module's +5v supply has gone
below the low +5v supply warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.145 |
| mcrXfpLow5VoltWarnRecov Trap being sent indicates that an XFP module's +5v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.146 |
| mcrXfpLow5VoltAlarm Trap being sent indicates that an XFP module's +5v supply has gone
below the low +5v supply alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.147 |
| mcrXfpLow5VoltAlarmRecov Trap being sent indicates that an XFP module's +5v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.148 |
| mcrXfpHigh33VoltWarn Trap being sent indicates that an XFP module's +3.3v supply has
exceeded the high +3.3v supply warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.149 |
| mcrMgtEmailServFail Trap being sent indicates that an alert email server is configured and the management
module can not communicate with the configured email server. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.15 |
| mcrXfpHigh33VoltWarnRecov Trap being sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.150 |
| mcrXfpHigh33VoltAlarm Trap being sent indicates that an XFP module's +3.3v supply has
exceeded the high +3.3v supply alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.151 |
| mcrXfpHigh33VoltAlarmRecov Trap being sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.152 |
| mcrXfpLow33VoltWarn Trap being sent indicates that an XFP module's +3.3v supply has gone
below the low +3.3v supply warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.153 |
| mcrXfpLow33VoltWarnRecov Trap being sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.154 |
| mcrXfpLow33VoltAlarm Trap being sent indicates that an XFP module's +3.3v supply has gone
below the low +3.3v supply alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.155 |
| mcrXfpLow33VoltAlarmRecov Trap being sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.156 |
| mcrXfpHigh18VoltWarn Trap being sent indicates that an XFP module's +1.8v supply has
exceeded the high +1.8v supply warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.157 |
| mcrXfpHigh18VoltWarnRecov Trap being sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.158 |
| mcrXfpHigh18VoltAlarm Trap being sent indicates that an XFP module's +1.8v supply has
exceeded the high +1.8v supply alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.159 |
| mcrMgtEmailServRec Trap being sent indicates that an alert email server is configured and the management
module has recovered communications with the configured email server. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.16 |
| mcrXfpHigh18VoltAlarmRecov Trap being sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.160 |
| mcrXfpLow18VoltWarn Trap being sent indicates that an XFP module's +1.8v supply has gone
below the low +1.8v supply warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.161 |
| mcrXfpLow18VoltWarnRecov Trap being sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.162 |
| mcrXfpLow18VoltAlarm Trap being sent indicates that an XFP module's +1.8v supply has gone
below the low +1.8v supply alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.163 |
| mcrXfpLow18VoltAlarmRecov Trap being sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.164 |
| mcrXfpHighM52VoltWarn Trap being sent indicates that an XFP module's -5.2v supply has
exceeded the high -5.2v supply warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.165 |
| mcrXfpHighM52VoltWarnRecov Trap being sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.166 |
| mcrXfpHighM52VoltAlarm Trap being sent indicates that an XFP module's -5.2v supply has
exceeded the high -5.2v supply alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.167 |
| mcrXfpHighM52VoltAlarmRecov Trap being sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.168 |
| mcrXfpLowM52VoltWarn Trap being sent indicates that an XFP module's -5.2v supply has gone
below the low -5.2v supply warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.169 |
| mcrMgtConfSavedFlash Trap being sent indicates that the configuration has been saved to flash on the
management module. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.17 |
| mcrXfpLowM52VoltWarnRecov Trap being sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.170 |
| mcrXfpLowM52VoltAlarm Trap being sent indicates that an XFP module's -5.2v supply has gone
below the low -5.2v supply alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.171 |
| mcrXfpLowM52VoltAlarmRecov Trap being sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.172 |
| mcrXfpHigh5VCurrentWarn Trap being sent indicates that an XFP module's +5v supply current has
exceeded the high +5v supply current warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.173 |
| mcrXfpHigh5VCurrentWarnRecov Trap being sent indicates that an XFP module's +5v supply current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.174 |
| mcrXfpHigh5VCurrentAlarm Trap being sent indicates that an XFP module's +5v supply current has
exceeded the high +5v supply current alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.175 |
| mcrXfpHigh5VCurrentAlarmRecov Trap being sent indicates that an XFP module's +5v supply current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.176 |
| mcrXfpLow5VCurrentWarn Trap being sent indicates that an XFP module's +5v supply current has gone
below the low +5v supply current warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.177 |
| mcrXfpLow5VCurrentWarnRecov Trap being sent indicates that an XFP module's +5v supply current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.178 |
| mcrXfpLow5VCurrentAlarm Trap being sent indicates that an XFP module's +5v supply current has gone
below the low +5v supply current alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.179 |
| mcrMgtIpAddrDynChg Trap being sent indicates that the system IP address has been dynamically
changed. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.18 |
| mcrXfpLow5VCurrentAlarmRecov Trap being sent indicates that an XFP module's +5v supply current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.180 |
| mcrXfpHigh33VCurrentWarn Trap being sent indicates that an XFP module's +3.3v supply current has
exceeded the high +3.3v supply current warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.181 |
| mcrXfpHigh33VCurrentWarnRecov Trap being sent indicates that an XFP module's +3.3v supply current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.182 |
| mcrXfpHigh33VCurrentAlarm Trap being sent indicates that an XFP module's +3.3v supply current has
exceeded the high +3.3v supply current alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.183 |
| mcrXfpHigh33VCurrentAlarmRecov Trap being sent indicates that an XFP module's +3.3v supply current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.184 |
| mcrXfpLow33VCurrentWarn Trap being sent indicates that an XFP module's +3.3v supply current has gone
below the low +3.3v supply current warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.185 |
| mcrXfpLow33VCurrentWarnRecov Trap being sent indicates that an XFP module's +3.3v supply current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.186 |
| mcrXfpLow33VCurrentAlarm Trap being sent indicates that an XFP module's +3.3v supply current has gone
below the low +3.3v supply current alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.187 |
| mcrXfpLow33VCurrentAlarmRecov Trap being sent indicates that an XFP module's +3.3v supply current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.188 |
| mcrXfpHigh18VCurrentWarn Trap being sent indicates that an XFP module's +1.8v supply current has
exceeded the high +1.8v supply current warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.189 |
| mcrMgtTftpUploadFail Trap being sent indicates that an attempt to transfer a file via TFTP, off the
management module to a remote host has failed. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.19 |
| mcrXfpHigh18VCurrentWarnRecov Trap being sent indicates that an XFP module's +1.8v supply current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.190 |
| mcrXfpHigh18VCurrentAlarm Trap being sent indicates that an XFP module's +1.8v supply current has
exceeded the high +1.8v supply current alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.191 |
| mcrXfpHigh18VCurrentAlarmRecov Trap being sent indicates that an XFP module's +1.8v supply current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.192 |
| mcrXfpLow18VCurrentWarn Trap being sent indicates that an XFP module's +1.8v supply current has gone
below the low +1.8v supply current warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.193 |
| mcrXfpLow18VCurrentWarnRecov Trap being sent indicates that an XFP module's +1.8v supply current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.194 |
| mcrXfpLow18VCurrentAlarm Trap being sent indicates that an XFP module's +1.8v supply current has gone
below the low +1.8v supply current alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.195 |
| mcrXfpLow18VCurrentAlarmRecov Trap being sent indicates that an XFP module's +1.8v supply current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.196 |
| mcrXfpHighM52VCurrentWarn Trap being sent indicates that an XFP module's -5.2v supply current has
exceeded the high -5.2v supply current warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.197 |
| mcrXfpHighM52VCurrentWarnRecov Trap being sent indicates that an XFP module's -5.2v supply current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.198 |
| mcrXfpHighM52VCurrentAlarm Trap being sent indicates that an XFP module's -5.2v supply current has
exceeded the high -5.2v supply current alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.199 |
| mcrMgtSystemBoot Trap being sent indicates that the management module's system firmware is
being booted up and has completed system initialization. In some case this alert
will indicate a cold sta… | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.2 |
| mcrMgtTftpUploadSuccess Trap being sent indicates that an attempt to transfer a file via TFTP, off the
management module to a remote host was successful. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.20 |
| mcrXfpHighM52VCurrentAlarmRecov Trap being sent indicates that an XFP module's -5.2v supply current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.200 |
| mcrXfpLowM52VCurrentWarn Trap being sent indicates that an XFP module's -5.2v supply current has gone
below the low -5.2v supply current warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.201 |
| mcrXfpLowM52VCurrentWarnRecov Trap being sent indicates that an XFP module's -5.2v supply current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.202 |
| mcrXfpLowM52VCurrentAlarm Trap being sent indicates that an XFP module's -5.2v supply current has gone
below the low -5.2v supply current alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.203 |
| mcrXfpLowM52VCurrentAlarmRecov Trap being sent indicates that an XFP module's -5.2v supply current has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.204 |
| mcrXfpHighVCC5Warn Trap being sent indicates that an XFP module's +5v supply has
exceeded the high +5v supply warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.205 |
| mcrXfpHighVCC5WarnRecov Trap being sent indicates that an XFP module's +5v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.206 |
| mcrXfpHighVCC5Alarm Trap being sent indicates that an XFP module's +5v supply has
exceeded the high +5v supply alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.207 |
| mcrXfpHighVCC5AlarmRecov Trap being sent indicates that an XFP module's +5v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.208 |
| mcrXfpLowVCC5Warn Trap being sent indicates that an XFP module's +5v supply has gone
below the low +5v supply warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.209 |
| mcrMgtTftpDownloadFail Trap being sent indicates that an attempt to transfer a file via TFTP, from a
remote host to the management module has failed. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.21 |
| mcrXfpLowVCC5WarnRecov Trap being sent indicates that an XFP module's +5v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.210 |
| mcrXfpLowVCC5Alarm Trap being sent indicates that an XFP module's +5v supply has gone
below the low +5v supply alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.211 |
| mcrXfpLowVCC5AlarmRecov Trap being sent indicates that an XFP module's +5v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.212 |
| mcrXfpHighVCC3Warn Trap being sent indicates that an XFP module's +3.3v supply has
exceeded the high +3.3v supply warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.213 |
| mcrXfpHighVCC3WarnRecov Trap being sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.214 |
| mcrXfpHighVCC3Alarm Trap being sent indicates that an XFP module's +3.3v supply has
exceeded the high +3.3v supply alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.215 |
| mcrXfpHighVCC3AlarmRecov Trap being sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.216 |
| mcrXfpLowVCC3Warn Trap being sent indicates that an XFP module's +3.3v supply has gone
below the low +3.3v supply warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.217 |
| mcrXfpLowVCC3WarnRecov Trap being sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.218 |
| mcrXfpLowVCC3Alarm Trap being sent indicates that an XFP module's +3.3v supply has gone
below the low +3.3v supply alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.219 |
| mcrMgtTftpDownloadSuccess Trap being sent indicates that an attempt to transfer a file via TFTP, from a
remote host to the management module was successful. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.22 |
| mcrXfpLowVCC3AlarmRecov Trap being sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.220 |
| mcrXfpHighVCC2Warn Trap being sent indicates that an XFP module's +1.8v supply has
exceeded the high +1.8v supply warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.221 |
| mcrXfpHighVCC2WarnRecov Trap being sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.222 |
| mcrXfpHighVCC2Alarm Trap being sent indicates that an XFP module's +1.8v supply has
exceeded the high +1.8v supply alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.223 |
| mcrXfpHighVCC2AlarmRecov Trap being sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.224 |
| mcrXfpLowVCC2Warn Trap being sent indicates that an XFP module's +1.8v supply has gone
below the low +1.8v supply warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.225 |
| mcrXfpLowVCC2WarnRecov Trap being sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.226 |
| mcrXfpLowVCC2Alarm Trap being sent indicates that an XFP module's +1.8v supply has gone
below the low +1.8v supply alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.227 |
| mcrXfpLowVCC2AlarmRecov Trap being sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.228 |
| mcrXfpHighVEE5Warn Trap being sent indicates that an XFP module's -5.2v supply has
exceeded the high -5.2v supply warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.229 |
| mcrMgtChassisMismatch Trap being sent indicates that the management module has been inserted into a
chassis that does not match it's Backup media converter module configuration. Backup media
module con… | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.23 |
| mcrXfpHighVEE5WarnRecov Trap being sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.230 |
| mcrXfpHighVEE5Alarm Trap being sent indicates that an XFP module's -5.2v supply has
exceeded the high -5.2v supply alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.231 |
| mcrXfpHighVEE5AlarmRecov Trap being sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.232 |
| mcrXfpLowVEE5Warn Trap being sent indicates that an XFP module's -5.2v supply has gone
below the low -5.2v supply warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.233 |
| mcrXfpLowVEE5WarnRecov Trap being sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.234 |
| mcrXfpLowVEE5Alarm Trap being sent indicates that an XFP module's -5.2v supply has gone
below the low -5.2v supply alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.235 |
| mcrXfpLowVEE5AlarmRecov Trap being sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.236 |
| mcrSfpSpeedMismatch Trap being sent indicates that there is a speed mismatch between the
two SFP modules installed in the media converter. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.237 |
| mcrSfpSpeedMismatchRecov Trap being sent indicates that the speed mismatch between the two SFP
modules has recovered. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.238 |
| mcrXfpPowerExceeded Trap being sent indicates that an XFP module's power requirements has
exceeded card capacity. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.239 |
| mcrChassisAdd Trap being sent indicates that a new chassis as been added to the chain of chassis. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.24 |
| mcrXfpPowerExceededRecov Trap being sent indicates that the XFP excessive power alarm has recovered. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.240 |
| mcrLinkTestError Trap being sent indicates that the link test running on the media
converter has detected errors. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.241 |
| mcrAlarmRelayEngaged Trap being sent indicates that the chassis alarm relay has engaged | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.242 |
| mcrAlarmRelayDisengaged Trap being sent indicates that the chassis alarm relay has disengaged | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.243 |
| mcrBandwidthLevelUpstreamLow Trap being sent indicates the media port is in a low upstream bandwidth condition. This happens when the bandwidth
is below the configured threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.244 |
| mcrBandwidthLevelUpstreamRecov Trap being sent indicates the media port has recovered from a low upstream bandwidth condition. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.245 |
| mcrBandwidthLevelDownstreamLow Trap being sent indicates the media port is in a low downstream bandwidth condition. This happens when the bandwidth
is below the configured threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.246 |
| mcrBandwidthLevelDownstreamRecov Trap being sent indicates the media port has recovered from a low downstream bandwidth condition. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.247 |
| mcrMediaRemoteReset Trap being sent indicates that the media converter module's peer has been manually reset by a user
managing the unit. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.248 |
| mcrChassisRemove Trap being sent indicates that that a chassis has been removed from the chain of
chassis. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.25 |
| mcrChassisReset Trap being sent indicates that the chassis back-plane has been manually reset by
a user managing the unit. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.26 |
| mcrChassisTemperatureAlarm Trap being sent indicates that the chassis temperature has exceeded the configured
high temperature threshold temperature. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.27 |
| mcrChassisTemperatureRecover Trap being sent indicates that the chassis temperature has recovered back to
normal operating temperature. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.28 |
| mcrChassisSlotPoweredOn Trap being sent indicates that the chassis slot has been powered off either manually
or through the configured chassis slot power schedule. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.29 |
| mcrMgtReset Trap being sent indicates that the management module has been manually reset
via the reset button or one of the managers. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.3 |
| mcrChassisSlotPoweredOff Trap being sent indicates that the chassis slot has been powered on either manually
or through the configured chassis slot power schedule. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.30 |
| mcrChassisFail Trap being sent indicates that the management module has detected a failure
condition in the chassis. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.31 |
| mcrChassisOk Trap being sent indicates that the chassis has recovered from a failure
and is now operating normally. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.32 |
| mcrPsmuInserted Trap being sent indicates that a power supply has been inserted into the chassis. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.33 |
| mcrPsmuRemoved Trap being sent indicates that a power supply's has been removed from the chassis. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.34 |
| mcrPsmuPsuFail Trap being sent indicates that the power supply has failed it's self-test
diagnostics. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.35 |
| mcrPsmuPsuOk Trap being sent indicates that the power supply has passed it's self-test
diagnostics. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.36 |
| mcrPsmuPsuVoltageFail Trap being sent indicates that the voltage being supplied by the indicated
power supply is insufficient. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.37 |
| mcrPsmuPsuVoltageOk Trap being sent indicates that the voltage being supplied by the indicated
power supply is now in the normal operating range. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.38 |
| mcrPsmuFanFail Trap being sent indicates that the fan has failed. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.39 |
| mcrPsmuFanOk Trap being sent indicates that the fan currently operating normally. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.40 |
| mcrMediaInserted Trap being sent indicates that a media converter module has been inserted into the chassis. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.42 |
| mcrMediaRemoved Trap being sent indicates that a media converter module has been removed from the chassis. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.43 |
| mcrMediaReset Trap being sent indicates that the media converter module has been manually reset by a user
managing the unit. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.44 |
| mcrMediaLostCommunication Trap being sent indicates that the management module can no longer communicate
with the media converter module | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.45 |
| mcrMediaRecovCommunication Trap being sent indicates that the management module recovered communication
with a media converter module | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.46 |
| mcrMediaFail Trap being sent indicates that the media converter module has failed its self-test
diagnostics | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.47 |
| mcrMediaOk Trap being sent indicates that the media converter module has passed its self-test
diagnostics | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.48 |
| mcrMediaLinkUp Trap being sent indicates that the current link status of the Fiber or Copper
port on the media converter module is up. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.49 |
| mcrMgtEtheLinkUp Trap being sent indicates that the current link status of the Ethernet
port on the management module is up. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.5 |
| mcrMediaLinkDown Trap being sent indicates that the current link status of the Fiber or Copper
port on the media converter module is down. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.50 |
| mcrMediaConfUpdateFail Trap being sent indicates that the configuration update on the media converter module
has failed. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.51 |
| mcrMediaConfUpdateSuccess Trap being sent indicates that the configuration update on the media converter module
was successful. The media converter module configuration can be updated manually or automati… | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.52 |
| mcrMediaConfMismatch Trap being sent indicates that a chassis slot is configured with Backup/Restore
and the media converter module type configured for the slot does not match the media converter modu… | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.53 |
| mcrMediaConfMismatchResolv Trap being sent indicates that a user has taken action to resolved media converter module
configuration mismatch | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.54 |
| mcrMediaFirmwareUpdateFail Trap being sent indicates that an attempt to update a media converter module's firmware has Failed. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.55 |
| mcrMediaFirmwareUpdateSuccess Trap being sent indicates that an attempt to update a media converter module's firmware was successful. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.56 |
| mcrSfpInserted Trap being sent indicates that a SFP module has been inserted into a media converter module | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.57 |
| mcrSfpRemoved Trap being sent indicates that a SFP module has been removed from a media converter module | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.58 |
| mcrSfpHighTempWarn Trap being sent indicates that a SFP module's temperature has exceeded the high
temperature warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.59 |
| mcrMgtEtheLinkDown Trap being sent indicates that the current link status of the Ethernet
port on the management module is down. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.6 |
| mcrSfpHighTempWarnRecov Trap being sent indicates that a SFP module's temperature has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.60 |
| mcrSfpHighTempAlarm Trap being sent indicates that a SFP module's temperature has exceeded the high
temperature alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.61 |
| mcrSfpHighTempAlarmRecov Trap being sent indicates that a SFP module's temperature has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.62 |
| mcrSfpLowTempWarn Trap being sent indicates that a SFP module's temperature has gone below the low
temperature warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.63 |
| mcrSfpLowTempWarnRecov Trap being sent indicates that a SFP module's temperature has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.64 |
| mcrSfpLowTempAlarm Trap being sent indicates that a SFP module's temperature has gone below the low
temperature alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.65 |
| mcrSfpLowTempAlarmRecov Trap being sent indicates that a SFP module's temperature has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.66 |
| mcrSfpHighVoltWarn Trap being sent indicates that a SFP module's voltage has exceeded the high
voltage warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.67 |
| mcrSfpHighVoltWarnRecov Trap being sent indicates that a SFP module's voltage has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.68 |
| mcrSfpHighVoltAlarm Trap being sent indicates that a SFP module's voltage has exceeded the high
voltage alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.69 |
| mcrMgtConMonDSRSigChg Trap being sent indicates that monitor console DSR is configured and the
status of one of these signal has changed on the console port. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.7 |
| mcrSfpHighVoltAlarmRecov Trap being sent indicates that a SFP module's voltage has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.70 |
| mcrSfpLowVoltWarn Trap being sent indicates that a SFP module's voltage has gone below the low
voltage warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.71 |
| mcrSfpLowVoltWarnRecov Trap being sent indicates that a SFP module's voltage has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.72 |
| mcrSfpLowVoltAlarm Trap being sent indicates that a SFP module's voltage has gone below the low
voltage alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.73 |
| mcrSfpLowVoltAlarmRecov Trap being sent indicates that a SFP module's voltage has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.74 |
| mcrSfpHighTxBiasWarn Trap being sent indicates that a SFP module's TX Bias current has exceeded the high
TX Bias current warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.75 |
| mcrSfpHighTxBiasWarnRecov Trap being sent indicates that a SFP module's TX Bias current has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.76 |
| mcrSfpHighTxBiasAlarm Trap being sent indicates that a SFP module's TX Bias current has exceeded the high
TX Bias current alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.77 |
| mcrSfpHighTxBiasAlarmRecov Trap being sent indicates that a SFP module's TX Bias current has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.78 |
| mcrSfpLowTxBiasWarn Trap being sent indicates that a SFP module's TX Bias current has gone below the low
Tx Bias current warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.79 |
| mcrMgtAuthFail Trap being sent indicates that a user failed authentication via Telnet, SSH,
WebManager, SNMP or the serial console. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.8 |
| mcrSfpLowTxBiasWarnRecov Trap being sent indicates that a SFP module's TX Bias current has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.80 |
| mcrSfpLowTxBiasAlarm Trap being sent indicates that a SFP module's TX Bias current has gone below the low
Tx Bias current alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.81 |
| mcrSfpLowTxBiasAlarmRecov Trap being sent indicates that a SFP module's TX Bias current has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.82 |
| mcrSfpHighTxPowerWarn Trap being sent indicates that a SFP module's TX power has exceeded the high
TX power warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.83 |
| mcrSfpHighTxPowerWarnRecov Trap being sent indicates that a SFP module's TX power has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.84 |
| mcrSfpHighTxPowerAlarm Trap being sent indicates that a SFP module's TX power has exceeded the high
TX power alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.85 |
| mcrSfpHighTxPowerAlarmRecov Trap being sent indicates that a SFP module's TX power has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.86 |
| mcrSfpLowTxPowerWarn Trap being sent indicates that a SFP module's TX power has gone below the low
TX power warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.87 |
| mcrSfpLowTxPowerWarnRecov Trap being sent indicates that a SFP module's TX power has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.88 |
| mcrSfpLowTxPowerAlarm Trap being sent indicates that a SFP module's TX power has gone below the low
TX power alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.89 |
| mcrMgtAuthSuccess Trap being sent indicates that a user failed authentication via Telnet, SSH,
WebManager or the serial console. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.9 |
| mcrSfpLowTxPowerAlarmRecov Trap being sent indicates that a SFP module's TX power has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.90 |
| mcrSfpHighRxPowerWarn Trap being sent indicates that a SFP module's RX power has exceeded the high
RX power warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.91 |
| mcrSfpHighRxPowerWarnRecov Trap being sent indicates that a SFP module's RX power has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.92 |
| mcrSfpHighRxPowerAlarm Trap being sent indicates that a SFP module's RX power has exceeded the high
RX power alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.93 |
| mcrSfpHighRxPowerAlarmRecov Trap being sent indicates that a SFP module's RX power has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.94 |
| mcrSfpLowRxPowerWarn Trap being sent indicates that a SFP module's RX power has gone below the low
RX power warning threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.95 |
| mcrSfpLowRxPowerWarnRecov Trap being sent indicates that a SFP module's RX power has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.96 |
| mcrSfpLowRxPowerAlarm Trap being sent indicates that a SFP module's RX power has gone below the low
RX power alarm threshold. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.97 |
| mcrSfpLowRxPowerAlarmRecov Trap being sent indicates that a SFP module's RX power has recovered to normal
operating level. | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.98 |
| mcrChassisCommTempSensorFail Trap being sent indicates that communication with the chassis temperature
sensor has failed. The current chassis temperature reading will be unknown | notification | - | .1.3.6.1.4.1.1966.21.1.1.0.99 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eventSeverityLevel The severity level of the event that generated this trap. | scalar | AlertSeverityLevel | .1.3.6.1.4.1.1966.21.1.1.1.2.3.3.10.8 |