mcrMgtConfigConsoleMonitorDSR
PERLE-MCR-MGT-MIB ·
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.12
Object
column
r/w
OnOffValue
Specifies whether the RS-232 signal DSR (Data Set Ready) should
be monitored, for the console port.
When DSR is monitored and the management module detects the DSR signal go inactive
then the current console management session will be reset.
Context
- MIB
- PERLE-MCR-MGT-MIB
- OID
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mcrMgtConfigEntry
- Table
- mcrMgtConfigTable
- Siblings
- 10
Syntax
OnOffValue
- Source
- OnOffValue
- Base type
Enumeration
Values & Constraints
Type Values
-1 | notApplicable |
0 | off |
1 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mcrMgtConfigConsoleStopBits Specifies the number of stop bits that follow a byte. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.10 |
| mcrMgtConfigConsoleFlowControl Defines whether the data flow is handled by the software (Soft), hardware (Hard),
both or None. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.11 |
| mcrMgtConfigSlotIndex The Slot number the MCR-MGT module is currently inserted | column | SlotNumber | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.2 |
| mcrMgtConfigStatus When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the contai… | column | ContainerStatus | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.3 |
| mcrMgtConfigEthSpeedDuplex Define the Ethernet connection speed/duplex of the twisted pair interface. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.4 |
| mcrMgtConfigEthCrossover Define the Ethernet connection crossover TX/RX Pair orientation of the
twisted pair interface as auto(0), mdi(1) (straight through) or mdix(2)
(crossed over). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.5 |
| mcrMgtConfigConsolePortEnabled Determines whether the management module's console port is enabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.6 |
| mcrMgtConfigConsoleSpeed Specifies the baud rate of the console port; keep in mind that
speed is affected by the length of the cable. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.7 |
| mcrMgtConfigConsoleDataBits Specifies the number of bits in a byte. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.8 |
| mcrMgtConfigConsoleParity Specifies if you are using Even, Odd, or No parity on the console. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.9 |