cm1110CopperCrossOver
PERLE-MCR-MGT-MIB ·
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.30
Object
column
Enumeration
If copper auto-negotiation state is complete then this object indicates the media converter module's current copper auto-negotiated MDI/MDI-X setting. If auto-negotiation is not complete then the value returned should be ignored.
Context
- MIB
- PERLE-MCR-MGT-MIB
- OID
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.30- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cm1110RateConvEntry
- Table
- cm1110RateConvTable
- Siblings
- 31
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cm1110HwSw4TpDuplex Media converter module's current switch setting for copper duplex. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.10 |
| cm1110HwSw5TpSpeed Media converter module's current switch setting for Link Mode. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.11 |
| cm1110HwSw6FiberAutoNegotiation Media converter module's current switch setting for fiber Auto-Ngotiation.
This object is not applicable if there is a 100 Mbps SFP modules
inserted. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.12 |
| cm1110HwSw6FiberSfp100Duplex Media converter module's current switch setting for fiber duplex if a 100 Mbps
SFP module is inserted. Otherwise this object is not applicable. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.13 |
| cm1110HwSw7Loopback Media converter module's current switch setting for fiber loopback mode. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.14 |
| cm1110FiberLinkStatus Media converter module's current fiber link status. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.15 |
| cm1110FiberConnType Media converter module's fiber port connector type. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.16 |
| cm1110FiberAutoNegState Media converter module's current fiber auto-negotiation state. This object is
not applicable if the fiber connector type is a 100 Mbps SFP module. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.17 |
| cm1110FiberSpeed If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated duplex setting. If
auto-negotiation is not comple… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.18 |
| cm1110FiberDuplex This object identifies the current fiber port duplex state. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.19 |
| cm1110SlotIndex The Slot number the CM-1110 type module is currently inserted | column | SlotNumber | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.2 |
| cm1110FiberPauseEnh If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If
auto-negotiation is not complet… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.20 |
| cm1110FiberLPRFStatus Media converter module's fiber Link Partner Remote Fault status. This object
is not applicable if there is a 100 Mbps SFP module inserted. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.21 |
| cm1110FiberSfp100FarEndFault Media converter module's current fiber Far End Fault status if a 100 Mbps SFP
module is inserted. Otherwise this object is not applicable. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.22 |
| cm1110FiberReceiveStatus This object identifies the status of whether light is being received
on the fiber port | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.23 |
| cm1110FiberLoopBack This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitches(0). | column | EnableDisableValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.24 |
| cm1110CopperLinkStatus Media converter module's current copper link status. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.25 |
| cm1110CopperConnType Media converter module's copper connector type. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.26 |
| cm1110CopperAutoNegState Media converter module's current copper auto-negotiation state. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.27 |
| cm1110CopperSpeed If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated speed
setting. If auto-negotiation is not compl… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.28 |
| cm1110CopperDuplex If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated duplex
setting. If auto-negotiation is not comp… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.29 |
| cm1110ModelName This object identifies the model of media converter module present in the
chassis | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.3 |
| cm1110CopperPauseEnh If copper auto-negotiation state is complete then this object indicates
the media converter module's current copper auto-negotiated pause setting. If
auto-negotiation is not compl… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.31 |
| cm1110CopperLPRFStatus Media converter module's copper Link Partner Remote Fault status. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.32 |
| cm1110CopperAutoSpeedDownshift This object identifies the status of the copper auto speed downshift
feature. noDownshift indicates that an automatic downshift of the
copper speed has not occurred. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.33 |
| cm1110ModelDesc This object identifies a static description of the media converter module present
in the chassis | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.4 |
| cm1110HwJmp5ConfigMode This object identifies the media converter module's ConfigMode, set by hardware
switch on the media converter module. When this object is set to hardwareSwitches(0), the
media con… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.5 |
| cm1110HwJmp6AutoMDIX This object identifies the media converter module's hardware Auto MDIX jumper
settings. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.6 |
| cm1110HwSw1TpAutoNegotiation Media converter module's current switch setting for copper Auto-Negotiation. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.7 |
| cm1110HwSw2LinkMode Media converter module's current switch setting for Link Mode. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.8 |
| cm1110HwSw3FiberFaultAlert Media converter module's current switch setting for Fiber Fault Alert. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.9 |