cm1110ConfigPriorityToEgressQueueMap4
PERLE-MCR-MGT-MIB ·
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.31
Object
column
r/w
Integer32
Set the egress queue of frames tagged with 802.1p priority 4. A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module firmware upgrade).
Context
- MIB
- PERLE-MCR-MGT-MIB
- OID
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.31- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cm1110ConfigEntry
- Table
- cm1110ConfigTable
- Siblings
- 75
Syntax
Integer32
Values & Constraints
Enumerated Values
0 | disabled |
1 | enabled |
Object Constraints
range: 0-3
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cm1110ConfigFiberAutoNegotiation This object identifies whether fiber auto-negotiation is enabled.
This object does not apply if the fiber connector type is a 100 Mbps
SFP module. This object is read-only if th… | column | EnableDisableValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.10 |
| cm1110ConfigFiberSfp100duplex If the fiber connector type is SFP and it is a 100 Mbps fiber module then
this object identifies the duplex setting for the 100 Mbps fiber port.
Duplex for 1000 Mbps has to be aut… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.11 |
| cm1110ConfigCopperPortName This object identifies a user definable name for the copper port. | column | OctetString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.12 |
| cm1110ConfigCopperPortEnable This object identifies whether the fiber port is enabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.13 |
| cm1110ConfigCopperAutoNegotiation This object identifies the whether copper auto-negotiation is
enabled. This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0). | column | EnableDisableValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.14 |
| cm1110ConfigCopperAutoNegAdv10HDX This object controls whether or the copper port advertises willingness
to connect at 10Mbps, half duplex. This setting is ignored when
auto-negotiation is disabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.15 |
| cm1110ConfigCopperAutoNegAdv10FDX This object controls whether or the copper port advertises willingness
to connect at 10Mbps, full duplex. This setting is ignored when
auto-negotiation is disabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.16 |
| cm1110ConfigCopperAutoNegAdv100HDX This object controls whether or the copper port advertises willingness
to connect at 100Mbps, half duplex. This setting is ignored when
auto-negotiation is disabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.17 |
| cm1110ConfigCopperAutoNegAdv100FDX This object controls whether or the copper port advertises willingness
to connect at 100Mbps, full duplex. This setting is ignored when
auto-negotiation is disabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.18 |
| cm1110ConfigCopperAutoNegAdv1000FDX This object controls whether or the copper port advertises willingness
to connect at 1000Mbps, full duplex. This setting is ignored when
auto-negotiation is disabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.19 |
| cm1110ConfigSlotIndex The Slot number the CM-1110 type module is currently inserted | column | SlotNumber | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.2 |
| cm1110ConfigCopperSpeed If copper auto-negotiation is disabled then this object identifies
the configured cooper speed. 1000 Mbps speed can only be auto
negotiated. If copper auto-negotiation is enabled … | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.20 |
| cm1110ConfigCopperDuplex If copper auto-negotiation is disabled then this object identifies
the duplex setting for 10 & 100 Mbps for the copper port. Duplex for
1000 Mbps has to be auto negotiated. This … | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.21 |
| cm1110ConfigCopperCrossOver This object identifies the copper MDI/MDI-X setting.This object
is read-only if the media converter module's ConfigMode jumper is set to | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.22 |
| cm1110ConfigCopperPauseEnh This object identifies the copper pause (flow control) setting that
is a advertised. The settings can be disabled, advertise symmetrical,
advertise asymmetrical TX or advertise sy… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.23 |
| cm1110ConfigCopperAutoSpeedDownshift This object identifies the number of times the PHY attempts to
establish a Gigabit link before the PHY downshift to the next
highest speed. A value of 0 indicates the auto downsh… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.24 |
| cm1110ConfigCopper10BaseTDistance When using cable exceeding 100 meters in 10BASE-T mode this feature
should be set to extended(1). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.25 |
| cm1110ConfigUnidirectionalEthernet Restrict the flow of Ethernet traffic to a single direction.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.26 |
| cm1110ConfigPriorityToEgressQueueMap0 Set the egress queue of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feat… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.27 |
| cm1110ConfigPriorityToEgressQueueMap1 Set the egress queue of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feat… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.28 |
| cm1110ConfigPriorityToEgressQueueMap2 Set the egress queue of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feat… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.29 |
| cm1110ConfigStatus When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the contai… | column | ContainerStatus | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.3 |
| cm1110ConfigPriorityToEgressQueueMap3 Set the egress queue of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feat… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.30 |
| cm1110ConfigPriorityToEgressQueueMap5 Set the egress queue of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feat… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.32 |
| cm1110ConfigPriorityToEgressQueueMap6 Set the egress queue of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feat… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.33 |
| cm1110ConfigPriorityToEgressQueueMap7 Set the egress queue of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feat… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.34 |
| cm1110ConfigCopper8021pPriority Use 802.1p tag priority.
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.35 |
| cm1110ConfigCopperIpTosPriority Use IP TOS priority.
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.36 |
| cm1110ConfigCopperPriorityPrecedence Configure priority precedence.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.37 |
| cm1110ConfigCopperCongestionPolicy Configure priority congestion policy.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.38 |
| cm1110ConfigCopperPriorityMap0 Change the priority of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.39 |
| cm1110ConfigModuleName This object identifies a user configurable name for the media converter module
present in the chassis. | column | OctetString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.4 |
| cm1110ConfigCopperPriorityMap1 Change the priority of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.40 |
| cm1110ConfigCopperPriorityMap2 Change the priority of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.41 |
| cm1110ConfigCopperPriorityMap3 Change the priority of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.42 |
| cm1110ConfigCopperPriorityMap4 Change the priority of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.43 |
| cm1110ConfigCopperPriorityMap5 Change the priority of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.44 |
| cm1110ConfigCopperPriorityMap6 Change the priority of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.45 |
| cm1110ConfigCopperPriorityMap7 Change the priority of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.46 |
| cm1110ConfigCopperIngressLimit Set a limit on the rate of incoming packets.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.47 |
| cm1110ConfigCopperEgressLimit Set a limit on the rate of outgoing packets.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.48 |
| cm1110ConfigCopperDiscardTaggedFrames Enable discarding of tagged frames.
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.49 |
| cm1110ConfigLinkMode This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.5 |
| cm1110ConfigCopperDiscardUntaggedFrames Enable discarding of untagged frames.
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.50 |
| cm1110ConfigCopperDefaultVlanId Set the default VLAN ID to insert when tagging frames.
(This feature may require a media converter module firmware upgrade). | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.51 |
| cm1110ConfigCopperDefaultPriority Set the default frame priority.
(This feature may require a media converter module firmware upgrade). | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.52 |
| cm1110ConfigCopperVlanTaggingAction Set the default tagging action.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.53 |
| cm1110ConfigCopperFilterUnknownMulticast Enable filtering of multicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.54 |
| cm1110ConfigCopperFilterUnknownUnicast Enable filtering of unicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.55 |
| cm1110ConfigFiber8021pPriority Use 802.1p tag priority.
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.56 |
| cm1110ConfigFiberIpTosPriority Use IP TOS priority.
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.57 |
| cm1110ConfigFiberPriorityPrecedence Configure priority precedence.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.58 |
| cm1110ConfigFiberCongestionPolicy Configure priority congestion policy.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.59 |
| cm1110ConfigFiberFaultAlert This object identifies the Fiber Fault Alert setting for the media
module. For 100 Mbps SFP modules, this setting is always effectively
enabled if Link Mode is set to smartLinkPas… | column | EnableDisableValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.6 |
| cm1110ConfigFiberPriorityMap0 Change the priority of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.60 |
| cm1110ConfigFiberPriorityMap1 Change the priority of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.61 |
| cm1110ConfigFiberPriorityMap2 Change the priority of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.62 |
| cm1110ConfigFiberPriorityMap3 Change the priority of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.63 |
| cm1110ConfigFiberPriorityMap4 Change the priority of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.64 |
| cm1110ConfigFiberPriorityMap5 Change the priority of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.65 |
| cm1110ConfigFiberPriorityMap6 Change the priority of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.66 |
| cm1110ConfigFiberPriorityMap7 Change the priority of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.67 |
| cm1110ConfigFiberIngressLimit Set a limit on the rate of incoming packets.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.68 |
| cm1110ConfigFiberEgressLimit Set a limit on the rate of outgoing packets.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.69 |
| cm1110ConfigMaxPacketsSize This object identifies the media converter module's maximum packet size setting
This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitc… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.7 |
| cm1110ConfigFiberDiscardTaggedFrames Enable discarding of tagged frames.
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.70 |
| cm1110ConfigFiberDiscardUntaggedFrames Enable discarding of untagged frames.
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.71 |
| cm1110ConfigFiberDefaultVlanId Set the default VLAN ID to insert when tagging frames.
(This feature may require a media converter module firmware upgrade). | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.72 |
| cm1110ConfigFiberDefaultPriority Set the default frame priority.
(This feature may require a media converter module firmware upgrade). | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.73 |
| cm1110ConfigFiberVlanTaggingAction Set the default tagging action.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.74 |
| cm1110ConfigFiberFilterUnknownMulticast Enable filtering of multicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.75 |
| cm1110ConfigFiberFilterUnknownUnicast Enable filtering of unicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.76 |
| cm1110ConfigFiberSgmiiInterface This object identifies whether fiber SGMII interface is enabled. | column | EnableDisableValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.77 |
| cm1110ConfigFiberPortName This object identifies a user definable name for the fiber port. | column | OctetString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.8 |
| cm1110ConfigFiberPortEnable This object identifies whether the fiber port is enabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.9 |