cm110ConfigUnidirectionalEthernet
PERLE-MCR-MGT-MIB ·
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.23
Object
column
r/w
Enumeration
Restrict the flow of Ethernet traffic to a single direction. A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module firmware upgrade).
Context
- MIB
- PERLE-MCR-MGT-MIB
- OID
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cm110ConfigEntry
- Table
- cm110ConfigTable
- Siblings
- 71
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cm110ConfigFiberDuplex This object identifies the fiber port duplex setting. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.10 |
| cm110ConfigCopperPortName This object identifies a user definable name for the copper port. | column | OctetString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.11 |
| cm110ConfigCopperPortEnable This object identifies whether the fiber port is enabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.12 |
| cm110ConfigCopperAutoNegotiation This object identifies the whether copper auto-negotiation is
enabled. This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.13 |
| cm110ConfigCopperAutoNegAdv10HDX This object controls whether or the copper port advertises willingness
to connect at 10Mbps, half duplex. This setting is ignored when
auto-negotiation is disabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.14 |
| cm110ConfigCopperAutoNegAdv10FDX This object controls whether or the copper port advertises willingness
to connect at 10Mbps, full duplex. This setting is ignored when
auto-negotiation is disabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.15 |
| cm110ConfigCopperAutoNegAdv100HDX This object controls whether or the copper port advertises willingness
to connect at 100Mbps, half duplex. This setting is ignored when
auto-negotiation is disabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.16 |
| cm110ConfigCopperAutoNegAdv100FDX This object controls whether or the copper port advertises willingness
to connect at 100Mbps, full duplex. This setting is ignored when
auto-negotiation is disabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.17 |
| cm110ConfigCopperSpeed This object identifies the current copper speed in megabits per
second. This object is ignored if auto-negotiation is enabled.
This object is ignored if auto-negotiation is enabled | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.18 |
| cm110ConfigCopperDuplex This object identifies the copper duplex setting. This object is
ignored if auto-negotiation is enabled This object is read-only
if the media converter module's ConfigMode jumpe… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.19 |
| cm110ConfigSlotIndex The Slot number the CM-110 type module is currently inserted | column | SlotNumber | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.2 |
| cm110ConfigCopperCrossOver This object identifies the copper MDI/MDI-X setting.This object
is read-only if the media converter module's ConfigMode jumper is set to | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.20 |
| cm110ConfigCopperPause This object identifies the copper's pause (flow control) settings.
This object is read-only if the media converter module's ConfigMode jumper
is set to hardwareSwitches(0). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.21 |
| cm110ConfigCopperExtendDistance When using cable exceeding 100 meters, the 10BASE-T this feature
should be enabled. | column | EnableDisableValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.22 |
| cm110ConfigPriorityToEgressQueueMap0 Set the egress queue of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feat… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.24 |
| cm110ConfigPriorityToEgressQueueMap1 Set the egress queue of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feat… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.25 |
| cm110ConfigPriorityToEgressQueueMap2 Set the egress queue of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feat… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.26 |
| cm110ConfigPriorityToEgressQueueMap3 Set the egress queue of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feat… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.27 |
| cm110ConfigPriorityToEgressQueueMap4 Set the egress queue of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feat… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.28 |
| cm110ConfigPriorityToEgressQueueMap5 Set the egress queue of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feat… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.29 |
| cm110ConfigStatus When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the contai… | column | ContainerStatus | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.3 |
| cm110ConfigPriorityToEgressQueueMap6 Set the egress queue of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feat… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.30 |
| cm110ConfigPriorityToEgressQueueMap7 Set the egress queue of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This feat… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.31 |
| cm110ConfigCopper8021pPriority Use 802.1p tag priority.
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.32 |
| cm110ConfigCopperIpTosPriority Use IP TOS priority.
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.33 |
| cm110ConfigCopperPriorityPrecedence Configure priority precedence.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.34 |
| cm110ConfigCopperCongestionPolicy Configure priority congestion policy.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.35 |
| cm110ConfigCopperPriorityMap0 Change the priority of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.36 |
| cm110ConfigCopperPriorityMap1 Change the priority of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.37 |
| cm110ConfigCopperPriorityMap2 Change the priority of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.38 |
| cm110ConfigCopperPriorityMap3 Change the priority of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.39 |
| cm110ConfigModuleName This object identifies a user configurable name for the media converter module
present in the chassis. | column | OctetString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.4 |
| cm110ConfigCopperPriorityMap4 Change the priority of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.40 |
| cm110ConfigCopperPriorityMap5 Change the priority of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.41 |
| cm110ConfigCopperPriorityMap6 Change the priority of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.42 |
| cm110ConfigCopperPriorityMap7 Change the priority of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.43 |
| cm110ConfigCopperIngressLimit Set a limit on the rate of incoming packets.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.44 |
| cm110ConfigCopperEgressLimit Set a limit on the rate of outgoing packets.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.45 |
| cm110ConfigCopperDiscardTaggedFrames Enable discarding of tagged frames.
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.46 |
| cm110ConfigCopperDiscardUntaggedFrames Enable discarding of untagged frames.
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.47 |
| cm110ConfigCopperDefaultVlanId Set the default VLAN ID to insert when tagging frames.
(This feature may require a media converter module firmware upgrade). | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.48 |
| cm110ConfigCopperDefaultPriority Set the default frame priority.
(This feature may require a media converter module firmware upgrade). | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.49 |
| cm110ConfigLinkMode This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.5 |
| cm110ConfigCopperVlanTaggingAction Set the default tagging action.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.50 |
| cm110ConfigCopperFilterUnknownMulticast Enable filtering of multicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.51 |
| cm110ConfigCopperFilterUnknownUnicast Enable filtering of unicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.52 |
| cm110ConfigFiber8021pPriority Use 802.1p tag priority.
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.53 |
| cm110ConfigFiberIpTosPriority Use IP TOS priority.
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.54 |
| cm110ConfigFiberPriorityPrecedence Configure priority precedence.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.55 |
| cm110ConfigFiberCongestionPolicy Configure priority congestion policy.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.56 |
| cm110ConfigFiberPriorityMap0 Change the priority of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.57 |
| cm110ConfigFiberPriorityMap1 Change the priority of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.58 |
| cm110ConfigFiberPriorityMap2 Change the priority of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.59 |
| cm110ConfigFiberFarEndFault This object identifies the Fiber Fault Alert setting for the media
module. This setting is always enabled if Link Mode is set to linkPassthrough.
This object is read-only if the m… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.6 |
| cm110ConfigFiberPriorityMap3 Change the priority of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.60 |
| cm110ConfigFiberPriorityMap4 Change the priority of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.61 |
| cm110ConfigFiberPriorityMap5 Change the priority of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.62 |
| cm110ConfigFiberPriorityMap6 Change the priority of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.63 |
| cm110ConfigFiberPriorityMap7 Change the priority of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported
by the current media converter module firmware.
(This featu… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.64 |
| cm110ConfigFiberIngressLimit Set a limit on the rate of incoming packets.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.65 |
| cm110ConfigFiberEgressLimit Set a limit on the rate of outgoing packets.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.66 |
| cm110ConfigFiberDiscardTaggedFrames Enable discarding of tagged frames.
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.67 |
| cm110ConfigFiberDiscardUntaggedFrames Enable discarding of untagged frames.
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.68 |
| cm110ConfigFiberDefaultVlanId Set the default VLAN ID to insert when tagging frames.
(This feature may require a media converter module firmware upgrade). | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.69 |
| cm110ConfigMaxPacketSize This object identifies the media converter module's maximum packet size setting
This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitc… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.7 |
| cm110ConfigFiberDefaultPriority Set the default frame priority.
(This feature may require a media converter module firmware upgrade). | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.70 |
| cm110ConfigFiberVlanTaggingAction Set the default tagging action.
(This feature may require a media converter module firmware upgrade). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.71 |
| cm110ConfigFiberFilterUnknownMulticast Enable filtering of multicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.72 |
| cm110ConfigFiberFilterUnknownUnicast Enable filtering of unicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). | column | OnOffValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.73 |
| cm110ConfigFiberPortName This object identifies a user definable name for the fiber port. | column | OctetString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.8 |
| cm110ConfigFiberPortEnable This object identifies whether the fiber port is enabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.9 |