cm10gtConfigPort2CopperEnergyEfficientEthernet
PERLE-MCR-MGT-MIB ·
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.23
Object
column
r/w
OnOffValue
This object identifies the copper Energy-Efficient Ethernet setting for the media converter module present in the chassis.
Context
- MIB
- PERLE-MCR-MGT-MIB
- OID
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cm10gtConfigEntry
- Table
- cm10gtConfigTable
- Siblings
- 21
Syntax
OnOffValue
- Source
- OnOffValue
- Base type
Enumeration
Values & Constraints
Type Values
-1 | notApplicable |
0 | off |
1 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cm10gtConfigPort1FecEnable This object identifies the whether FEC control is enabled for this
port. This config option only applies for an XFP module. This
object is read-only if the media module's Confi… | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.10 |
| cm10gtConfigPort1FecAmplitude This object identifies the FEC Amplitude value for this port. This
config option only applies for an XFP module. This object is
read-only if the media converter module's ConfigM… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.11 |
| cm10gtConfigPort1FecPhase This object identifies the FEC phase value for this port. This
config option only applies for an XFP module. This object is
read-only if the media converter module's ConfigMode … | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.12 |
| cm10gtConfigPort1WavelengthEnable This object identifies whether Wavelength fine tuning is enabled for
this port. This object is read-only if the media module's ConfigMode
jumper is set to hardwareSwitches(0). | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.13 |
| cm10gtConfigPort1WavelengthValue This object identifies Wavelength fine tuning value for this port.
This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0). | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.14 |
| cm10gtConfigPort1ChannelEnable This object identifies whether channel number fine tuning is enabled
for this port. This object is read-only if the media module's
ConfigMode jumper is set to hardwareSwitches(0). | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.15 |
| cm10gtConfigPort1ChannelNumber This object identifies the channel number fine tuning value for this
port. This object is read-only if the media converter module's
ConfigMode jumper is set to hardwareSwitches(0… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.16 |
| cm10gtConfigPort1TxDitherEnable This object identifies the whether TX Dither control is enabled on
this port. If not enabled the default TX Dither value will be used.
This object is read-only if the media module… | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.17 |
| cm10gtConfigPort1TxDitherValue This object identifies the whether TX Dither is enabled for this
port. This object is read-only if the media module's ConfigMode
jumper is set to hardwareSwitches(0). | column | EnableDisableValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.18 |
| cm10gtConfigPort2Name This object identifies a user definable name for port 2. | column | OctetString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.19 |
| cm10gtConfigSlotIndex The Slot number the CM-10G type module is currently inserted | column | SlotNumber | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.2 |
| cm10gtConfigPort2Enable This object identifies whether port 2 is enabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.20 |
| cm10gtConfigPort2CopperDuplex This object identifies the duplex settings for the copper port. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.21 |
| cm10gtConfigPort2CopperPauseEnh This object identifies the copper pause (flow control) setting that
is a advertised. The settings can be disabled, advertise symmetrical,
advertise asymmetrical TX or advertise sy… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.22 |
| cm10gtConfigStatus When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the contai… | column | ContainerStatus | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.3 |
| cm10gtConfigModuleName This object identifies a user configurable name for the media converter module
present in the chassis. | column | OctetString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.4 |
| cm10gtConfigLinkMode This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.5 |
| cm10gtConfigFiberFaultAlert This object identifies the Fiber Fault Alert setting for the media
module. This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0). | column | EnableDisableValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.6 |
| cm10gtConfigFiberAutoNeg This object identifies the wither fiber auto-negotiation is
enabled for both ports. This only applies if 1G SFP modules are in
use. This object is read-only if the media module's… | column | EnableDisableValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.7 |
| cm10gtConfigPort1Name This object identifies a user definable name for port 1. | column | OctetString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.8 |
| cm10gtConfigPort1Enable This object identifies whether port 1 is enabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.9 |