cm10gHwSw2LinkMode
PERLE-MCR-MGT-MIB ·
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.7
Object
column
Enumeration
Media converter module's current switch setting for Link Mode. If the Operation switch is set to Test, then this object indicates whether the port is in loopback or performing the build in link-test.
Context
- MIB
- PERLE-MCR-MGT-MIB
- OID
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cm10gFixedEntry
- Table
- cm10gFixedTable
- Siblings
- 24
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cm10gHwSw5Port2EdcMode This oject indicates the current switch setting for EDC auto mode
for port 2. This object only applies to SFP moudles. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.10 |
| cm10gPort1LinkStatus Media converter module's current fiber link status (port 1). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.11 |
| cm10gPort1ConnType Media converter module's fiber port connector type (port 1). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.12 |
| cm10gPort1AutoNegState Media converter module's current fiber auto-negotiation state (port 1). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.13 |
| cm10gPort1Speed Media converter module's fiber port speed in megabits per second (port 1). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.14 |
| cm10gPort1Duplex If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex
setting. If auto-negotiation is not comple… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.15 |
| cm10gPort1PauseEnh If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If
auto-negotiation is not complet… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.16 |
| cm10gPort1ReceiveStatus This object identifies the status of whether light is being received
on the fiber port (port 1) | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.17 |
| cm10gPort2LinkStatus Media converter module's current fiber link status (port 2). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.18 |
| cm10gPort2ConnType Media converter module's fiber port connector type (port 2). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.19 |
| cm10gSlotIndex The Slot number the CM-10G type module is currently inserted | column | SlotNumber | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.2 |
| cm10gPort2AutoNegState Media converter module's current fiber auto-negotiation state (port 2). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.20 |
| cm10gPort2Speed Media converter module's fiber port speed in megabits per second (port 2). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.21 |
| cm10gPort2Duplex If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex
setting. If auto-negotiation is not comple… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.22 |
| cm10gPort2PauseEnh If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If
auto-negotiation is not complet… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.23 |
| cm10gPort2ReceiveStatus This object identifies the status of whether light is being received
on the fiber port (port 2) | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.24 |
| cm10gPortLoopBack Media converter module's current port loopback mode setting. Writing to this
object will change the current settings. This object is read-only if
the media converter module's Conf… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.25 |
| cm10gPortTestMode Media converter module's current port test mode setting. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.26 |
| cm10gModelname This object identifies the model of media converter module present in the
chassis | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.3 |
| cm10gModelDesc This object identifies a static description of the media converter module present
in the chassis | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.4 |
| cm10gHwJmp5ConfigMode This object identifies the media converter module's ConfigMode, set by hardware
jumper J5 on the media converter module. When this object is set to
hardwareSwitches(0), the media … | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.5 |
| cm10gHwSw1OperationMode Media converter module's current switch setting for operation mode.
Data mode is for normal data transmission. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.6 |
| cm10gHwSw3FiberFaultAlert Media converter module's current switch setting for Fiber Fault
Alert. If the Operation switch is set to Test, then this object
indicates which port is in test mode | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.8 |
| cm10gHwSw4Port1EdcMode This oject indicates the current switch setting for EDC auto mode
for port 1. This object only applies to SFP moudles. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.9 |