cm10gConfigPort2FecPhase
PERLE-MCR-MGT-MIB ·
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.25
Object
column
r/w
Integer32
This object identifies the FEC phase value for this port. This config option only applies for an XFP module. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0).
Context
- MIB
- PERLE-MCR-MGT-MIB
- OID
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.25- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cm10gConfigEntry
- Table
- cm10gConfigTable
- Siblings
- 29
Syntax
Integer32
Values & Constraints
Object Constraints
range: -128-127
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cm10gConfigPort1EdcMode This object identifies the EDC mode for this port. This config
option only applies for an SFP module. This object is read-only if the
media converter module's ConfigMode jumper … | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.10 |
| cm10gConfigPort1FecEnable This object identifies the whether FEC control is enabled for this
port. This config option only applies for an XFP module. This
object is read-only if the media module's Confi… | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.11 |
| cm10gConfigPort1FecAmplitude This object identifies the FEC Amplitude value for this port. This
config option only applies for an XFP module. This object is
read-only if the media converter module's ConfigM… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.12 |
| cm10gConfigPort1FecPhase This object identifies the FEC phase value for this port. This
config option only applies for an XFP module. This object is
read-only if the media converter module's ConfigMode … | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.13 |
| cm10gConfigPort1WavelengthEnable This object identifies whether Wavelength fine tuning is enabled for
this port. This object is read-only if the media module's ConfigMode
jumper is set to hardwareSwitches(0). | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.14 |
| cm10gConfigPort1WavelengthValue This object identifies Wavelength fine tuning value for this port.
This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0). | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.15 |
| cm10gConfigPort1ChannelEnable This object identifies whether channel number fine tuning is enabled
for this port. This config option only applies for an XFP module.
This object is read-only if the media modul… | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.16 |
| cm10gConfigPort1ChannelNumber This object identifies the channel number fine tuning value for this
port. This object is read-only if the media converter module's
ConfigMode jumper is set to hardwareSwitches(0… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.17 |
| cm10gConfigPort1TxDitherEnable This object identifies the whether TX Dither control is enabled on
this port. If not enabled the default TX Dither value will be used.
This object is read-only if the media module… | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.18 |
| cm10gConfigPort1TxDitherValue This object identifies the whether TX Dither is enabled for this
port. This object is read-only if the media module's ConfigMode
jumper is set to hardwareSwitches(0). | column | EnableDisableValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.19 |
| cm10gConfigSlotIndex The Slot number the CM-10G type module is currently inserted | column | SlotNumber | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.2 |
| cm10gConfigPort2Name This object identifies a user definable name for port 2. | column | OctetString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.20 |
| cm10gConfigPort2Enable This object identifies whether port 2 is enabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.21 |
| cm10gConfigPort2EdcMode This object identifies the EDC mode for this port. This config
option only applies for an SFP module. This object is read-only if the
media converter module's ConfigMode jumper … | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.22 |
| cm10gConfigPort2FecEnable This object identifies the whether FEC control is enabled for this
port. This config option only applies for an XFP module. This
object is read-only if the media module's Confi… | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.23 |
| cm10gConfigPort2FecAmplitude This object identifies the FEC Amplitude value for this port. This
config option only applies for an XFP module. This object is
read-only if the media converter module's ConfigM… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.24 |
| cm10gConfigPort2WavelengthEnable This object identifies whether Wavelength fine tuning is enabled for
this port. This object is read-only if the media module's ConfigMode
jumper is set to hardwareSwitches(0). | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.26 |
| cm10gConfigPort2WavelengthValue This object identifies Wavelength fine tuning value for this port.
This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0). | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.27 |
| cm10gConfigPort2ChannelEnable This object identifies whether channel number fine tuning is enabled
for this port. This object is read-only if the media module's
ConfigMode jumper is set to hardwareSwitches(0). | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.28 |
| cm10gConfigPort2ChannelNumber This object identifies the channel number fine tuning value for this
port. This object is read-only if the media converter module's
ConfigMode jumper is set to hardwareSwitches(0… | column | Integer32 | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.29 |
| cm10gConfigStatus When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the contai… | column | ContainerStatus | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.3 |
| cm10gConfigPort2TxDitherEnable This object identifies the whether TX Dither control is enabled on
this port. If not enabled the default TX Dither value will be used.
This object is read-only if the media module… | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.30 |
| cm10gConfigPort2TxDitherValue This object identifies the whether TX Dither is enabled for this
port. This object is read-only if the media module's ConfigMode
jumper is set to hardwareSwitches(0). | column | EnableDisableValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.31 |
| cm10gConfigModuleName This object identifies a user configurable name for the media converter module
present in the chassis. | column | OctetString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.4 |
| cm10gConfigLinkMode This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to
hardwareSwitches(0). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.5 |
| cm10gConfigFiberFaultAlert This object identifies the Fiber Fault Alert setting for the media
module. This object is read-only if the media converter module's ConfigMode
jumper is set to hardwareSwitches(0). | column | EnableDisableValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.6 |
| cm10gConfigFiberAutoNeg This object identifies the wither fiber auto-negotiation is
enabled for both ports. This only applies if 1G SFP modules are in
use. This object is read-only if the media module's… | column | EnableDisableValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.7 |
| cm10gConfigPort1Name This object identifies a user definable name for port 1. | column | OctetString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.8 |
| cm10gConfigPort1Enable This object identifies whether port 1 is enabled. | column | YesNoValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.9 |