cm100CopperCrossOver
PERLE-MCR-MGT-MIB ·
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.23
Object
column
Enumeration
If copper auto-negotiation state is complete then this object indicates the media converter module's current copper auto-negotiated MDI/MDI-X setting. If auto-negotiation is not complete then the value returned should be ignored.
Context
- MIB
- PERLE-MCR-MGT-MIB
- OID
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.23- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cm100FixedEntry
- Table
- cm100FixedTable
- Siblings
- 23
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | disabled |
1 | enabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cm100HwSw5Pause Media converter module's current switch setting for copper pause (flow control). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.10 |
| cm100HwSw6Loopback Media converter module's current switch setting for fiber loopback mode. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.11 |
| cm100FiberLinkStatus Media converter module's current fiber link status. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.12 |
| cm100FiberConnType Media converter module's fiber port connector type. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.13 |
| cm100FiberSpeed Media converter module's fiber port speed in megabits per second. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.14 |
| cm100FiberFarEndFault Media converter module's current fiber Far End Fault status. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.15 |
| cm100FiberReceiveStatus This object identifies the status of whether light is being received
on the fiber port | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.16 |
| cm100FiberLoopBack This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitches(0). | column | EnableDisableValue | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.17 |
| cm100CopperLinkStatus Media converter module's current copper link status. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.18 |
| cm100CopperConnType Media converter module's copper connector type. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.19 |
| cm100SlotIndex The Slot number the CM-100 type module is currently inserted | column | SlotNumber | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.2 |
| cm100CopperAutoNegState Media converter module's current copper auto-negotiation state. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.20 |
| cm100CopperSpeed This object identifies the copper port speed in megabits per second. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.21 |
| cm100CopperDuplex If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated duplex
setting. If auto-negotiation is not comp… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.22 |
| cm100CopperPause If copper auto-negotiation state is complete then this object indicates
the media converter module's current copper auto-negotiated pause (flow control)
setting. If auto-negotiati… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.24 |
| cm100CopperLPRFStatus Media converter module's copper Link Partner Remote Fault status. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.25 |
| cm100ModelName This object identifies the model of media converter module present in the
chassis | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.3 |
| cm100ModelDesc This object identifies a static description of the media converter module present
in the chassis | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.4 |
| cm100HwJmp5ConfigMode This object identifies the media converter module's ConfigMode, set by hardware
switch on the media converter module. When this object is set to hardwareSwitches(0), the
media con… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.5 |
| cm100HwJmp6AutoMDI This object identifies the media converter module's hardware Auto MDIX jumper
settings. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.6 |
| cm100HwSw1AutoNegotiation Media converter module's current switch setting for fiber Auto-Negotiation. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.7 |
| cm100HwSw2LinkMode Media converter module's current switch setting for Link Mode. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.8 |
| cm100HwSw3FarEndFault Media converter module's current switch setting for Far End Fault. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.9 |