sfpLength50Mi10M
PDN-SFP-MIB ·
.1.3.6.1.4.1.1795.2.24.14.3.1.2.1.15
Object
The link length that is supported by the sfp transceiver while operating in compliance with applicable standards using multi-mode fibre (50 micron). The value is in units of 10 meters. A value of 255 means that the sfp transceiver supports a link length greater than 2.54 Km. A value of 0 means that the transceiver does not support multi-mode fibre (50 micron) or that the length information must be determined from the transceiver technology
Context
- MIB
- PDN-SFP-MIB
- OID
.1.3.6.1.4.1.1795.2.24.14.3.1.2.1.15- Type
- column
- Access
- readonly
- Status
- current
- Units
- 10 Meters(M)
- Parent
- sfpInfoEntry
- Table
- sfpInfoTable
- Siblings
- 29
Syntax
10 Meters(M) SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sfpIdentifier The type of serial transceiver
unknown -- Unknown or unspecified
gbic -- GBIC
fixed -- Module/connector soldered to motherboard
sfp -- SFP transceiver
other -- Vendor specific | column | Enumeration | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.1 |
| sfpFibreChannelTransmissionSpeed The fibre channel transmission speed
unknown -- Unknown
mbps400 -- Twin Axial Pair
mbps200 -- Shielded Twisted Pair
mbps100 -- Miniature Coax | column | Bits | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.10 |
| sfpEncoding The type of serial encoding that is the nominal
design target of the particular SFP transceiver
unknown -- Unknown or unspecified
b8b10 -- 8B10B
b4b5 --… | column | Enumeration | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.11 |
| sfpBRNominal100Mbps The nominal bit rate(BR, nominal) which is specified in unitd of 100mbps,
rounded off to the nearest 100 Mbps. The bit rate includes those bits necessary
to encode and delimit t… | column | 100 Megabits per second (Mbps) SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.12 |
| sfpLength9MiKm The link length that is supported by the sfp transceiver while operating
in compliance with applicable standards using single mode fibre (9 micron).
The value is in units of kilo… | column | Kilometer(Km) SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.13 |
| sfpLength9Mi100M The link length that is supported by the sfp transceiver while operating in
compliance with applicable standards using single mode fibre (9 micron).The
value is in units of 100 … | column | 100 Meters(M) SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.14 |
| sfpLength62Pt5Mi10M The link length that is supported by the sfp transceiver while operating in
compliance with applicable standards using multi-mode fibre (62.5 micron).
The value is in units of 10… | column | 10 Meters(M) SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.16 |
| sfpLengthCopperM The link length that is supported by the sfp transceiver while operating
in compliance with applicable standards using copper cable. The value is in
units of 1 meters. A value o… | column | 1 Meter(M) SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.17 |
| sfpVendorName The sfp vendor name which is essentially the full name of the corporation,
a commonly accepted abbreviation of the name of the corporation, the SCSI
company code for the corpora… | column | OctetString | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.18 |
| sfpVendorOUI The sfp vendor organizationally unique identifier field (vendor OUI) that
contains the IEEE company identifier for the vendor. A value of all zero in
the 3 octet field indicates… | column | OctetString | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.19 |
| sfpVendorSpecificIdentifier The vendor specific identifier. This Object will be set to
value other than {0,0} only if sfpIdentifier returns a value of
other | column | OctetString | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.2 |
| sfpVendorPN The sfp vendor part number (Vendor PN) or product name if the Vendor PN is
unspecified, the null string {0, 0} will be returned | column | OctetString | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.20 |
| sfpVendorSN The sfp vendor serial number (Vendor SN) if the Vendor SN is unspecified,
the null string {0, 0} will be returned | column | OctetString | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.21 |
| sfpVendorRev The sfp vendor product revision number (Vendor Rev)
if the Vendor Rev is unspecified, the null string {0, 0} will be
returned | column | OctetString | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.22 |
| sfpLaserWavelength Nominal Transmitter output wavelength at room temperature. | column | Nano Meter(NM) SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.23 |
| sfpOptions The options implemented in the SFP transceiver
unknown -- Unknown
rateSelect -- RATE_SELECT is implemented.
If this bit is not set, no control of pin is required.
… | column | Bits | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.24 |
| sfpBRMin The lower bit rate limit at which the SFP transceiver will meet its
specifications (BR, min) is specified in units of 1% below the nominal
bit rate. A value of zero indicates that… | column | percent below sfpBRNominal SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.25 |
| sfpBRMax The upper bit rate limit at which the SFP transceiver will meet its
specifications (BR, max) is specified in units of 1% above the nominal
bit rate. A value of zero indicates that… | column | percent above sfpBRNominal SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.26 |
| sfpVendorDate The Vendors date | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.27 |
| sfpVendorSpecificLotCode The Vendor Specific Lot code. A value of {0, 0} indicates that
the lot code is unspecified | column | OctetString | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.28 |
| sfpVendorSpecificData Vendor Specific Information which can be read from the SFP transceiver | column | OctetString | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.29 |
| sfpExtIdentifier The type of serial transceiver
unknown -- Unknown or unspecified
simd -- Serial ID module Definition | column | Enumeration | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.3 |
| sfpStatusCurrent The current state of the sfp transceiver
unknown -- Unknown
notInstalled -- the SFP transceiver is not installed
installed -- the sfp transceiver has been installed
faulty -- the … | column | Bits | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.30 |
| sfpConnector The type of external connector provided
unknown -- Unknown or unspecified
sc -- SC
fcscc1 -- Fibre Channel Style 1 copper connector
fcscc2 -- Fibre Channel Style 2 copper connecto… | column | Enumeration | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.4 |
| sfpVendorSpecificConnector The type of vendor specific Connector. This Object will be set to
value other than {0,0} only if sfpConnector returns a value of
other | column | OctetString | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.5 |
| sfpTransceiverComplianceCodes The sfp transceiver codes for sonet
unknown -- Unknown
-- SONET Compliance Codes --
oc48LongReach1 -- OC-48, long reach, SONET LR-1 Compliant
oc48Lo… | column | Bits | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.6 |
| sfpFibreChannelLinkLength The link length for fibre
unknown -- Unknown
veryLong -- very long distance
short -- short distance
intermediate -- intermediate distance
long -- long distance
notFibre -- The tra… | column | Bits | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.7 |
| sfpFibreChannelTransmitterTechnology The fibre channel transmitter technology
unknown -- Unknown
lc -- Longwave Laser
el1 -- Electrical inter-enclosure
el2 -- Electrical intra-enclosure
sn -- Shortwave laser w/o OFC
… | column | Bits | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.8 |
| sfpFibreChannelTransmissionMedia The fibre channel transmitter technology
unknown -- Unknown
tw -- Twin Axial Pair
tp -- Shielded Twisted Pair
mi -- Miniature Coax
tv -- Video Coax
m6 -- Multi-mode, 62.5mi
m5 -- … | column | Bits | .1.3.6.1.4.1.1795.2.24.14.3.1.2.1.9 |