ospfv3RestartTime
OSPFV3-MIB ·
.1.3.6.1.2.1.191.1.1.25
Object
scalar
SNMPv2-TCTimeStamp
The value of sysUpTime on the most recent occasion at which the ospfv3RestartExitReason was updated.
Context
- MIB
- OSPFV3-MIB
- OID
.1.3.6.1.2.1.191.1.1.25- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- ospfv3GeneralGroup
- Siblings
- 24
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ospfv3RouterId A 32-bit unsigned integer uniquely identifying
the router in the Autonomous System. To ensure
uniqueness, this may default to the 32-bit
unsigned integer representation of one of… | scalar | Ospfv3RouterIdTC | .1.3.6.1.2.1.191.1.1.1 |
| ospfv3ExtLsaCount The number of External (LS type 0x4005) in the
link state database. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.2.1.191.1.1.10 |
| ospfv3ExtAreaLsdbLimit The maximum number of non-default
AS-external-LSA entries that can be stored in the
link state database. If the value is -1, then
there is no limit.
When the number of… | scalar | Integer32 | .1.3.6.1.2.1.191.1.1.11 |
| ospfv3ExitOverflowInterval The number of seconds that, after entering
Overflow state, a router will attempt to leave
Overflow state. This allows the router to again
originate non-default, AS-External-LSAs.… | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.191.1.1.12 |
| ospfv3DemandExtensions The router's support for demand circuits.
The value of this object is true (1) when
demand circuits are supported.
This object is persistent, and when written, the
enti… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.191.1.1.13 |
| ospfv3ReferenceBandwidth Reference bandwidth in kilobits per second for
calculating default interface metrics. The
default value is 100,000 KBPS (100 MBPS).
This object is persistent, and when… | scalar | kilobits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.191.1.1.14 |
| ospfv3RestartSupport The router's support for OSPF graceful restart.
Options include no restart support, only planned
restarts, or both planned and unplanned restarts.
This objec… | scalar | Enumeration | .1.3.6.1.2.1.191.1.1.15 |
| ospfv3RestartInterval Configured OSPF graceful restart timeout interval.
This object is persistent, and when written, the
entity SHOULD save the change to non-volatile
storage. | scalar | seconds Ospfv3UpToRefreshIntervalTC | .1.3.6.1.2.1.191.1.1.16 |
| ospfv3RestartStrictLsaChecking Indicates if strict LSA checking is enabled for
graceful restart. A value of true (1) indicates that
strict LSA checking is enabled.
This object is persistent, and whe… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.191.1.1.17 |
| ospfv3RestartStatus The current status of OSPF graceful restart capability. | scalar | Enumeration | .1.3.6.1.2.1.191.1.1.18 |
| ospfv3RestartAge Remaining time in the current OSPF graceful restart
interval. | scalar | seconds Ospfv3UpToRefreshIntervalTC | .1.3.6.1.2.1.191.1.1.19 |
| ospfv3AdminStatus The administrative status of OSPFv3 in the
router. The value 'enabled' denotes that the
OSPFv3 Process is active on at least one
interface; 'disabled' disables it on all
interfac… | scalar | OSPF-MIBStatus | .1.3.6.1.2.1.191.1.1.2 |
| ospfv3RestartExitReason Describes the outcome of the last attempt at a
graceful restart.
none: no restart has yet been attempted.
inProgress: a restart attempt is currently und… | scalar | Enumeration | .1.3.6.1.2.1.191.1.1.20 |
| ospfv3NotificationEnable This object provides a coarse level of control
over the generation of OSPFv3 notifications.
If this object is set to true (1), then it enables
the generation of OSPFv3 … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.191.1.1.21 |
| ospfv3StubRouterSupport The router's support for stub router functionality. An
object value of true (1) indicates that stub router
functionality is supported. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.191.1.1.22 |
| ospfv3StubRouterAdvertisement This object controls the advertisement of
stub LSAs by the router. The value
doNotAdvertise (1) will result in the advertisement
of standard LSAs and is the default value.
… | scalar | Enumeration | .1.3.6.1.2.1.191.1.1.23 |
| ospfv3DiscontinuityTime The value of sysUpTime on the most recent occasion
at which any one of this MIB's counters suffered
a discontinuity.
If no such discontinuities have occurred since the … | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.191.1.1.24 |
| ospfv3VersionNumber The version number of OSPF for IPv6 is 3. | scalar | Enumeration | .1.3.6.1.2.1.191.1.1.3 |
| ospfv3AreaBdrRtrStatus A flag to denote whether this router is an area
border router. The value of this object is true (1)
when the router is an area border router. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.191.1.1.4 |
| ospfv3ASBdrRtrStatus A flag to note whether this router is
configured as an Autonomous System border router.
This object is persistent, and when written, the
entity SHOULD save the change t… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.191.1.1.5 |
| ospfv3AsScopeLsaCount The number of AS-scope (e.g., AS-External) link state
advertisements in the link state database. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.2.1.191.1.1.6 |
| ospfv3AsScopeLsaCksumSum The 32-bit unsigned sum of the LS checksums of
the AS-scoped link state advertisements
contained in the link state database. This sum
can be used to determine if there has been a… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.191.1.1.7 |
| ospfv3OriginateNewLsas The number of new link state advertisements
that have been originated. This number is
incremented each time the router originates a new
LSA.
Discontinuities in the val… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.2.1.191.1.1.8 |
| ospfv3RxNewLsas The number of link state advertisements
received that are determined to be new
instantiations. This number does not include
newer instantiations of self-originated link state
adv… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.2.1.191.1.1.9 |