ospfv3ReferenceBandwidth
OSPFV3-MIB ·
.1.3.6.1.2.1.191.1.1.14
Object
Reference bandwidth in kilobits per second for
calculating default interface metrics. The
default value is 100,000 KBPS (100 MBPS).
This object is persistent, and when written, the
entity SHOULD save the change to non-volatile
storage.
Context
- MIB
- OSPFV3-MIB
- OID
.1.3.6.1.2.1.191.1.1.14- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- kilobits per second
- Parent
- ospfv3GeneralGroup
- Siblings
- 24
Syntax
kilobits per second SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ospfv3RouterId A 32-bit unsigned integer uniquely identifying
the router in the Autonomous System. To ensure
uniqueness, this may default to the 32-bit
unsigned integer representation of one of… | scalar | Ospfv3RouterIdTC | .1.3.6.1.2.1.191.1.1.1 |
| ospfv3ExtLsaCount The number of External (LS type 0x4005) in the
link state database. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.2.1.191.1.1.10 |
| ospfv3ExtAreaLsdbLimit The maximum number of non-default
AS-external-LSA entries that can be stored in the
link state database. If the value is -1, then
there is no limit.
When the number of… | scalar | Integer32 | .1.3.6.1.2.1.191.1.1.11 |
| ospfv3ExitOverflowInterval The number of seconds that, after entering
Overflow state, a router will attempt to leave
Overflow state. This allows the router to again
originate non-default, AS-External-LSAs.… | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.191.1.1.12 |
| ospfv3DemandExtensions The router's support for demand circuits.
The value of this object is true (1) when
demand circuits are supported.
This object is persistent, and when written, the
enti… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.191.1.1.13 |
| ospfv3RestartSupport The router's support for OSPF graceful restart.
Options include no restart support, only planned
restarts, or both planned and unplanned restarts.
This objec… | scalar | Enumeration | .1.3.6.1.2.1.191.1.1.15 |
| ospfv3RestartInterval Configured OSPF graceful restart timeout interval.
This object is persistent, and when written, the
entity SHOULD save the change to non-volatile
storage. | scalar | seconds Ospfv3UpToRefreshIntervalTC | .1.3.6.1.2.1.191.1.1.16 |
| ospfv3RestartStrictLsaChecking Indicates if strict LSA checking is enabled for
graceful restart. A value of true (1) indicates that
strict LSA checking is enabled.
This object is persistent, and whe… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.191.1.1.17 |
| ospfv3RestartStatus The current status of OSPF graceful restart capability. | scalar | Enumeration | .1.3.6.1.2.1.191.1.1.18 |
| ospfv3RestartAge Remaining time in the current OSPF graceful restart
interval. | scalar | seconds Ospfv3UpToRefreshIntervalTC | .1.3.6.1.2.1.191.1.1.19 |
| ospfv3AdminStatus The administrative status of OSPFv3 in the
router. The value 'enabled' denotes that the
OSPFv3 Process is active on at least one
interface; 'disabled' disables it on all
interfac… | scalar | OSPF-MIBStatus | .1.3.6.1.2.1.191.1.1.2 |
| ospfv3RestartExitReason Describes the outcome of the last attempt at a
graceful restart.
none: no restart has yet been attempted.
inProgress: a restart attempt is currently und… | scalar | Enumeration | .1.3.6.1.2.1.191.1.1.20 |
| ospfv3NotificationEnable This object provides a coarse level of control
over the generation of OSPFv3 notifications.
If this object is set to true (1), then it enables
the generation of OSPFv3 … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.191.1.1.21 |
| ospfv3StubRouterSupport The router's support for stub router functionality. An
object value of true (1) indicates that stub router
functionality is supported. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.191.1.1.22 |
| ospfv3StubRouterAdvertisement This object controls the advertisement of
stub LSAs by the router. The value
doNotAdvertise (1) will result in the advertisement
of standard LSAs and is the default value.
… | scalar | Enumeration | .1.3.6.1.2.1.191.1.1.23 |
| ospfv3DiscontinuityTime The value of sysUpTime on the most recent occasion
at which any one of this MIB's counters suffered
a discontinuity.
If no such discontinuities have occurred since the … | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.191.1.1.24 |
| ospfv3RestartTime The value of sysUpTime on the most recent occasion
at which the ospfv3RestartExitReason was updated. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.191.1.1.25 |
| ospfv3VersionNumber The version number of OSPF for IPv6 is 3. | scalar | Enumeration | .1.3.6.1.2.1.191.1.1.3 |
| ospfv3AreaBdrRtrStatus A flag to denote whether this router is an area
border router. The value of this object is true (1)
when the router is an area border router. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.191.1.1.4 |
| ospfv3ASBdrRtrStatus A flag to note whether this router is
configured as an Autonomous System border router.
This object is persistent, and when written, the
entity SHOULD save the change t… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.191.1.1.5 |
| ospfv3AsScopeLsaCount The number of AS-scope (e.g., AS-External) link state
advertisements in the link state database. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.2.1.191.1.1.6 |
| ospfv3AsScopeLsaCksumSum The 32-bit unsigned sum of the LS checksums of
the AS-scoped link state advertisements
contained in the link state database. This sum
can be used to determine if there has been a… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.191.1.1.7 |
| ospfv3OriginateNewLsas The number of new link state advertisements
that have been originated. This number is
incremented each time the router originates a new
LSA.
Discontinuities in the val… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.2.1.191.1.1.8 |
| ospfv3RxNewLsas The number of link state advertisements
received that are determined to be new
instantiations. This number does not include
newer instantiations of self-originated link state
adv… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.2.1.191.1.1.9 |