ospfv3IfLinkLsaCksumSum

OSPFV3-MIB · .1.3.6.1.2.1.191.1.7.1.20
MIB view Table view

Object

column SNMPv2-SMIUnsigned32 
The 32-bit unsigned sum of the Link-scope link state
advertisements' LS checksums contained in this
link's link state database.  The sum can be used
to determine if there has been a change in a
router's link state database or to compare the
link state database of two routers.

Context

MIB
OSPFV3-MIB
OID
.1.3.6.1.2.1.191.1.7.1.20
Type
column
Access
readonly
Status
current
Parent
ospfv3IfEntry
Table
ospfv3IfTable
Siblings
24

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ospfv3IfIndex
The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured.
columnIF-MIBInterfaceIndex.1.3.6.1.2.1.191.1.7.1.1
ospfv3IfRtrDeadInterval
The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multiple of the Hello int…
columnseconds Ospfv3DeadIntervalRangeTC.1.3.6.1.2.1.191.1.7.1.10
ospfv3IfPollInterval
The larger time interval, in seconds, between the Hello packets sent to an inactive, non-broadcast multi-access neighbor.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.2.1.191.1.7.1.11
ospfv3IfState
The OSPFv3 interface state. An interface may be in standby state if there are multiple interfaces on the link and another interface is active. The interface may be in Down state…
columnEnumeration.1.3.6.1.2.1.191.1.7.1.12
ospfv3IfDesignatedRouter
The Router ID of the Designated Router.
columnOspfv3RouterIdTC.1.3.6.1.2.1.191.1.7.1.13
ospfv3IfBackupDesignatedRouter
The Router ID of the Backup Designated Router.
columnOspfv3RouterIdTC.1.3.6.1.2.1.191.1.7.1.14
ospfv3IfEvents
The number of times this OSPFv3 interface has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initializatio…
columnSNMPv2-SMICounter32.1.3.6.1.2.1.191.1.7.1.15
ospfv3IfRowStatus
This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on w…
columnSNMPv2-TCRowStatus.1.3.6.1.2.1.191.1.7.1.16
ospfv3IfDemand
Indicates whether Demand OSPFv3 procedures (Hello suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be performed on this interface.
columnSNMPv2-TCTruthValue.1.3.6.1.2.1.191.1.7.1.17
ospfv3IfMetricValue
The metric assigned to this interface. The default value of the metric is 'Reference Bandwidth / ifSpeed'. The value of the reference bandwidth can be set in the ospfv3ReferenceB…
columnOSPF-MIBMetric.1.3.6.1.2.1.191.1.7.1.18
ospfv3IfLinkScopeLsaCount
The total number of Link-scope link state advertisements in this link's link state database.
columnSNMPv2-SMIGauge32.1.3.6.1.2.1.191.1.7.1.19
ospfv3IfInstId
Enables multiple interface instances of OSPFv3 to be run over a single link. Each interface instance would be assigned a separate ID. This ID has local link significance only.
columnOspfv3IfInstIdTC.1.3.6.1.2.1.191.1.7.1.2
ospfv3IfDemandNbrProbe
Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default.
columnSNMPv2-TCTruthValue.1.3.6.1.2.1.191.1.7.1.21
ospfv3IfDemandNbrProbeRetransLimit
The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down.
columnSNMPv2-SMIUnsigned32.1.3.6.1.2.1.191.1.7.1.22
ospfv3IfDemandNbrProbeInterval
Defines how often the neighbor will be probed.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.2.1.191.1.7.1.23
ospfv3IfTEDisabled
Indicates whether or not traffic engineering is disabled on the interface when traffic engineering is enabled in the area where the interface is attached. The object is set to th…
columnSNMPv2-TCTruthValue.1.3.6.1.2.1.191.1.7.1.24
ospfv3IfLinkLSASuppression
Specifies whether or not link LSA origination is suppressed for broadcast or NBMA interface types. The object is set to value true (1) to suppress the origination.
columnSNMPv2-TCTruthValue.1.3.6.1.2.1.191.1.7.1.25
ospfv3IfAreaId
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0 is used for the OSPFv3 backbone.
columnOspfv3AreaIdTC.1.3.6.1.2.1.191.1.7.1.3
ospfv3IfType
The OSPFv3 interface type.
columnEnumeration.1.3.6.1.2.1.191.1.7.1.4
ospfv3IfAdminStatus
The OSPFv3 interface's administrative status. The value formed on the interface; the interface will be advertised as an internal route to some area. The value 'disabled' denotes …
columnOSPF-MIBStatus.1.3.6.1.2.1.191.1.7.1.5
ospfv3IfRtrPriority
The priority of this interface. Used in multi-access networks, this field is used in the designated-router election algorithm. The value 0 signifies that the router is not eligi…
columnOSPF-MIBDesignatedRouterPriority.1.3.6.1.2.1.191.1.7.1.6
ospfv3IfTransitDelay
The estimated number of seconds it takes to transmit a Link State Update packet over this interface. LSAs contained in the update packet must have their age incremented by this a…
columnseconds Ospfv3UpToRefreshIntervalTC.1.3.6.1.2.1.191.1.7.1.7
ospfv3IfRetransInterval
The number of seconds between link state advertisement retransmissions for adjacencies belonging to this interface. This value is also used when retransmitting dat…
columnseconds Ospfv3UpToRefreshIntervalTC.1.3.6.1.2.1.191.1.7.1.8
ospfv3IfHelloInterval
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
columnseconds OSPF-MIBHelloRange.1.3.6.1.2.1.191.1.7.1.9