ospfv3ExitOverflowInterval

OSPFV3-MIB · .1.3.6.1.2.1.191.1.1.12

Object

scalar r/w seconds SNMPv2-SMIUnsigned32

The number of seconds that, after entering
Overflow state, a router will attempt to leave
Overflow state.  This allows the router to again
originate non-default, AS-External-LSAs.  When
set to 0, the router will not leave Overflow
state until restarted.
          
This object is persistent, and when written, the
entity SHOULD save the change to non-volatile
storage.

Context

MIB: OSPFV3-MIB
OID: .1.3.6.1.2.1.191.1.1.12
Type: scalar
Access: readwrite
Status: current
Units: seconds
Parent: ospfv3GeneralGroup
Siblings: 24

Syntax

seconds SNMPv2-SMIUnsigned32

Source: SNMPv2-SMIUnsigned32
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ospfv3RouterId A 32-bit unsigned integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the 32-bit unsigned integer representation of one of…	scalar	Ospfv3RouterIdTC	`.1.3.6.1.2.1.191.1.1.1`
ospfv3ExtLsaCount The number of External (LS type 0x4005) in the link state database.	scalar	SNMPv2-SMIGauge32	`.1.3.6.1.2.1.191.1.1.10`
ospfv3ExtAreaLsdbLimit The maximum number of non-default AS-external-LSA entries that can be stored in the link state database. If the value is -1, then there is no limit. When the number of…	scalar	Integer32	`.1.3.6.1.2.1.191.1.1.11`
ospfv3DemandExtensions The router's support for demand circuits. The value of this object is true (1) when demand circuits are supported. This object is persistent, and when written, the enti…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.191.1.1.13`
ospfv3ReferenceBandwidth Reference bandwidth in kilobits per second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS). This object is persistent, and when…	scalar	kilobits per second SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.191.1.1.14`
ospfv3RestartSupport The router's support for OSPF graceful restart. Options include no restart support, only planned restarts, or both planned and unplanned restarts. This objec…	scalar	Enumeration	`.1.3.6.1.2.1.191.1.1.15`
ospfv3RestartInterval Configured OSPF graceful restart timeout interval. This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.	scalar	seconds Ospfv3UpToRefreshIntervalTC	`.1.3.6.1.2.1.191.1.1.16`
ospfv3RestartStrictLsaChecking Indicates if strict LSA checking is enabled for graceful restart. A value of true (1) indicates that strict LSA checking is enabled. This object is persistent, and whe…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.191.1.1.17`
ospfv3RestartStatus The current status of OSPF graceful restart capability.	scalar	Enumeration	`.1.3.6.1.2.1.191.1.1.18`
ospfv3RestartAge Remaining time in the current OSPF graceful restart interval.	scalar	seconds Ospfv3UpToRefreshIntervalTC	`.1.3.6.1.2.1.191.1.1.19`
ospfv3AdminStatus The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one interface; 'disabled' disables it on all interfac…	scalar	OSPF-MIBStatus	`.1.3.6.1.2.1.191.1.1.2`
ospfv3RestartExitReason Describes the outcome of the last attempt at a graceful restart. none: no restart has yet been attempted. inProgress: a restart attempt is currently und…	scalar	Enumeration	`.1.3.6.1.2.1.191.1.1.20`
ospfv3NotificationEnable This object provides a coarse level of control over the generation of OSPFv3 notifications. If this object is set to true (1), then it enables the generation of OSPFv3 …	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.191.1.1.21`
ospfv3StubRouterSupport The router's support for stub router functionality. An object value of true (1) indicates that stub router functionality is supported.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.191.1.1.22`
ospfv3StubRouterAdvertisement This object controls the advertisement of stub LSAs by the router. The value doNotAdvertise (1) will result in the advertisement of standard LSAs and is the default value. …	scalar	Enumeration	`.1.3.6.1.2.1.191.1.1.23`
ospfv3DiscontinuityTime The value of sysUpTime on the most recent occasion at which any one of this MIB's counters suffered a discontinuity. If no such discontinuities have occurred since the …	scalar	SNMPv2-TCTimeStamp	`.1.3.6.1.2.1.191.1.1.24`
ospfv3RestartTime The value of sysUpTime on the most recent occasion at which the ospfv3RestartExitReason was updated.	scalar	SNMPv2-TCTimeStamp	`.1.3.6.1.2.1.191.1.1.25`
ospfv3VersionNumber The version number of OSPF for IPv6 is 3.	scalar	Enumeration	`.1.3.6.1.2.1.191.1.1.3`
ospfv3AreaBdrRtrStatus A flag to denote whether this router is an area border router. The value of this object is true (1) when the router is an area border router.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.191.1.1.4`
ospfv3ASBdrRtrStatus A flag to note whether this router is configured as an Autonomous System border router. This object is persistent, and when written, the entity SHOULD save the change t…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.191.1.1.5`
ospfv3AsScopeLsaCount The number of AS-scope (e.g., AS-External) link state advertisements in the link state database.	scalar	SNMPv2-SMIGauge32	`.1.3.6.1.2.1.191.1.1.6`
ospfv3AsScopeLsaCksumSum The 32-bit unsigned sum of the LS checksums of the AS-scoped link state advertisements contained in the link state database. This sum can be used to determine if there has been a…	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.191.1.1.7`
ospfv3OriginateNewLsas The number of new link state advertisements that have been originated. This number is incremented each time the router originates a new LSA. Discontinuities in the val…	scalar	SNMPv2-SMICounter32	`.1.3.6.1.2.1.191.1.1.8`
ospfv3RxNewLsas The number of link state advertisements received that are determined to be new instantiations. This number does not include newer instantiations of self-originated link state adv…	scalar	SNMPv2-SMICounter32	`.1.3.6.1.2.1.191.1.1.9`