jnxOspfv3IfLinkLsaCksumSum

OSPFV3-MIB-JUNIPER · .1.3.6.1.4.1.2636.5.4.1.1.7.1.21
MIB view Table view

Object

column deprecated SNMPv2-SMIInteger32 
The 32-bit unsigned sum of the Link-Scope link state 
advertisements' LS checksums contained in this 
link's link state database. The sum can be used 
to determine if there has been a change in a 
router's link state database, and to compare the 
link state database of two routers.

Context

MIB
OSPFV3-MIB-JUNIPER
OID
.1.3.6.1.4.1.2636.5.4.1.1.7.1.21
Type
column
Access
readonly
Status
deprecated
Parent
jnxOspfv3IfEntry
Table
jnxOspfv3IfTable
Siblings
23

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
jnxOspfv3IfIndex deprecated
The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2636.5.4.1.1.7.1.1
jnxOspfv3IfRtrDeadInterval deprecated
The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multiple of the Hello…
columnseconds JnxOspfv3DeadIntRangeTc.1.3.6.1.4.1.2636.5.4.1.1.7.1.10
jnxOspfv3IfPollInterval deprecated
The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2636.5.4.1.1.7.1.11
jnxOspfv3IfState deprecated
The OSPFv3 Interface State.
columnEnumeration.1.3.6.1.4.1.2636.5.4.1.1.7.1.12
jnxOspfv3IfDesignatedRouter deprecated
The Router ID of the Designated Router.
columnJnxOspfv3RouterIdTc.1.3.6.1.4.1.2636.5.4.1.1.7.1.13
jnxOspfv3IfBackupDesignatedRouter deprecated
The Router ID of the Backup Designated Router.
columnJnxOspfv3RouterIdTc.1.3.6.1.4.1.2636.5.4.1.1.7.1.14
jnxOspfv3IfEvents deprecated
The number of times this OSPF interface has changed its state, or an error has occurred.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2636.5.4.1.1.7.1.15
jnxOspfv3IfStatus deprecated
This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2636.5.4.1.1.7.1.16
jnxOspfv3IfMulticastForwarding deprecated
The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multicasting is not me…
columnEnumeration.1.3.6.1.4.1.2636.5.4.1.1.7.1.17
jnxOspfv3IfDemand deprecated
Indicates whether Demand OSPFv3 procedures (hello suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be performed on this interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2636.5.4.1.1.7.1.18
jnxOspfv3IfMetricValue deprecated
The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the reference bandwidth is configured by the ospfv3Refere…
columnOSPF-MIBMetric.1.3.6.1.4.1.2636.5.4.1.1.7.1.19
jnxOspfv3IfInstId deprecated
Enables multiple interface instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link significance only.
columnJnxOspfv3IfInstIdTc.1.3.6.1.4.1.2636.5.4.1.1.7.1.2
jnxOspfv3IfLinkScopeLsaCount deprecated
The total number of Link-Scope link state advertisements in this link's link state database.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2636.5.4.1.1.7.1.20
jnxOspfv3IfDemandNbrProbe deprecated
Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2636.5.4.1.1.7.1.22
jnxOspfv3IfDemandNbrProbeRetxLimit deprecated
The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2636.5.4.1.1.7.1.23
jnxOspfv3IfDemandNbrProbeInterval deprecated
Defines how often the neighbor will be probed.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2636.5.4.1.1.7.1.24
jnxOspfv3IfAreaId deprecated
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0 is used for the OSPFv3 backbone.
columnJnxOspfv3AreaIdTc.1.3.6.1.4.1.2636.5.4.1.1.7.1.3
jnxOspfv3IfType deprecated
The OSPFv3 interface type.
columnEnumeration.1.3.6.1.4.1.2636.5.4.1.1.7.1.4
jnxOspfv3IfAdminStat deprecated
The OSPFv3 interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' de…
columnOSPF-MIBStatus.1.3.6.1.4.1.2636.5.4.1.1.7.1.5
jnxOspfv3IfRtrPriority deprecated
The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not el…
columnOSPF-MIBDesignatedRouterPriority.1.3.6.1.4.1.2636.5.4.1.1.7.1.6
jnxOspfv3IfTransitDelay deprecated
The estimated number of seconds it takes to transmit a link state update packet over this interface.
columnseconds JnxOspfv3UpToRefreshIntervalTc.1.3.6.1.4.1.2636.5.4.1.1.7.1.7
jnxOspfv3IfRetransInterval deprecated
The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database desc…
columnseconds JnxOspfv3UpToRefreshIntervalTc.1.3.6.1.4.1.2636.5.4.1.1.7.1.8
jnxOspfv3IfHelloInterval deprecated
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
columnseconds OSPF-MIBHelloRange.1.3.6.1.4.1.2636.5.4.1.1.7.1.9