osVifMflgCfg
OS-VIF-MIB ·
.1.3.6.1.4.1.6926.2.2.11
Object
node
No description available.
Context
- MIB
- OS-VIF-MIB
- OID
.1.3.6.1.4.1.6926.2.2.11- Type
- node
- Parent
- osVif
- Siblings
- 10
- Children
- 7
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| osVifNotifications | node | - | .1.3.6.1.4.1.6926.2.2.0 |
| osVifGen | node | - | .1.3.6.1.4.1.6926.2.2.1 |
| osRtVifTable Allows to routing information in all types of interfaces. | table | - | .1.3.6.1.4.1.6926.2.2.10 |
| osVifConformance | node | - | .1.3.6.1.4.1.6926.2.2.101 |
| osVifTable Allows to manage a set of virtual interfaces | table | - | .1.3.6.1.4.1.6926.2.2.2 |
| osVifSlaTable This table allows to define source IP address for the virtual interface of the
service on the edge point. | table | - | .1.3.6.1.4.1.6926.2.2.3 |
| osVifIpTable . | table | - | .1.3.6.1.4.1.6926.2.2.4 |
| osVifMgmtTable . | table | - | .1.3.6.1.4.1.6926.2.2.5 |
| osDummyIfTable Allows to manage a set of dummy interfaces | table | - | .1.3.6.1.4.1.6926.2.2.7 |
| osVifConfigGrp | node | - | .1.3.6.1.4.1.6926.2.2.99 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| osVifMflgDetectOnly Detection only, not isolate.
CLI command:
detect-only
no detect-only | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.2.11.1 |
| osVifMflgTrustedPorts Ports, that will not be isolated by port-based MFLG.
CLI commands:
trusted-ports PORTS-GROUP
no trusted-ports (PORTS-GROUP|) | scalar | OS-COMMON-TC-MIBPortList | .1.3.6.1.4.1.6926.2.2.11.2 |
| osVifMflgRecoveryDelay Auto recovery delay.
A value of '0' means that automatic recovery is disabled.
CLI commands:
auto-recovery
auto-recovery-delay (no|<10-60000>)
no auto-recovery
no auto… | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6926.2.2.11.3 |
| osVifMflgPortThreshold The number of repeated re-learnings of the MAC per second, after
which the port is isolated. A value of '0' means that port-based MFLG is disabled.
This objects acts if loop was d… | scalar | Unsigned32 | .1.3.6.1.4.1.6926.2.2.11.4 |
| osVifMflgPbEnabled Enables and disables port-based MFLG.
CLI commands:
enable-port-based
no enable-port-based | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.2.11.5 |
| osVifMflgVbEnabled Enables and disables VLAN-based MFLG.
CLI commands:
enable-vlan-based
no enable-vlan-based | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.2.11.6 |
| osVifMflgEnabled Enables and disables MFLG.
CLI commands:
enable
no enable | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.2.11.7 |