osSyncET1CableType
OS-SYNCE-MIB ·
.1.3.6.1.4.1.6926.2.23.1.2.2.2
Object
scalar
r/w
Enumeration
osSyncET1CableType applies both to a ds1 port
configured with a short buildout (1-6) and for long buildout (7-9).
Short buildout is bescribed bythe length of the line (in feet).
For line lengths longer than 655 feet the ds1 buildout is long.
Long buildout is described in decibels(dB) the transmission signal
decreases over the line.
For long buildout the following values are valid:
lboNeg7p5dB - For -7.5 dB
lboNeg15p0dB - For -15.0 dB
lboNeg22p5dB - For -22.5 dB
For short buildout the following values are valid:
length0To133 - For line length from 0 to 133 feet (0.0dB)
length134To266 - For line length from 134 to 266 feet (0.5dB)
length267To399 - For line length from 267 to 399 feet (0.8dB)
length400To533 - For line length from 400 to 533 feet (1.1dB)
length534To655 - For line length from 534 to 655 feet (1.5dB)
Context
- MIB
- OS-SYNCE-MIB
- OID
.1.3.6.1.4.1.6926.2.23.1.2.2.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- osSyncEMIBCfgGen
- Siblings
- 8
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | lengthNotApplicable |
1 | length0To133 |
2 | length134To266 |
3 | length267To399 |
4 | length400To533 |
5 | length534To655 |
6 | lboNeg7p5dB |
7 | lboNeg15p0dB |
8 | lboNeg22p5dB |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| osSyncEStatus Enable SyncE protocol. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.23.1.2.2.1 |
| osSyncEDs1e1Type the value of osSyncEDs1e1Type indicates whether the DS1e1
signal is in T1, E1 or J1 mode.
in addition, a square signal of 1544 or 2048 (that can be
derived from the triatri-sig… | scalar | Enumeration | .1.3.6.1.4.1.6926.2.23.1.2.2.3 |
| osSyncEDs1e1Connect sec: Connectivity to SDH Equipment Clock
ssu: Connectivity to Synchronization Supply Unit | scalar | Enumeration | .1.3.6.1.4.1.6926.2.23.1.2.2.4 |
| osSyncEFrequencyClkIn frequency of the BNC input signal ClkIn. | scalar | Enumeration | .1.3.6.1.4.1.6926.2.23.1.2.2.5 |
| osSyncEFrequencyClkOut frequency of the BNC output signal ClkOut
ptp: connect the ptpOut signal to the clkOut BNC | scalar | Enumeration | .1.3.6.1.4.1.6926.2.23.1.2.2.6 |
| osSyncEFrequencyPtp frequency of the BNC input signal ClkIn | scalar | Enumeration | .1.3.6.1.4.1.6926.2.23.1.2.2.7 |
| osSyncELineCode This variable describes the variety of Zero Code Suppression used on the
link, which in turn affects a number of its characteristics. It should
be set to match the carrier.
… | scalar | Enumeration | .1.3.6.1.4.1.6926.2.23.1.2.2.8 |
| osSyncEFreeRunMode Free-run mode is one that has not beem syncronized to a clock source.
eec: EEC1 or EEC2 quality level as defined by ITU-T G.781
dnu: Do not use me (quality level 15) | scalar | Enumeration | .1.3.6.1.4.1.6926.2.23.1.2.2.9 |