osRfc2544LengthProbeInterval
OS-RFC2544-MIB ·
.1.3.6.1.4.1.6926.2.7.5.1.46
Object
The interval between packets. Objects osRfc2544LengthProbeInterval and osRfc2544ResultsRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osRfc2544Rate has been configured as equal to 0, then agent returns osRfc2544ProbeInterval equal to osRfc2544ResultsProbeInterval. If osRfc2544Rate has been configured as not equal to 0, then agent calculates interval between packets, corresponding to osRfc2544Rate and returns it as osRfc2544ResultsProbeInterval.
Context
- MIB
- OS-RFC2544-MIB
- OID
.1.3.6.1.4.1.6926.2.7.5.1.46- Type
- column
- Access
- readonly
- Status
- current
- Units
- microseconds
- Parent
- osRfc2544LengthEntry
- Table
- osRfc2544LengthTable
- Siblings
- 33
Syntax
microseconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| osRfc2544LengthDstMac For Layer 2 tests is equal to osRfc2544DstMac, for Layer 3 tests agent may place MAC
address of NextHop. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6926.2.7.5.1.10 |
| osRfc2544LengthSrcMac For Layer 2 tests is equal to osRfc2544SrcMac, for Layer 3 tests agent may place MAC
address of source interface. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6926.2.7.5.1.11 |
| osRfc2544LengthIpDstType For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544DstIpType. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6926.2.7.5.1.12 |
| osRfc2544LengthIpDstAddr For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544DstIpAddr. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.6926.2.7.5.1.13 |
| osRfc2544LengthIpSrcType For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544SrcIpType. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6926.2.7.5.1.14 |
| osRfc2544LengthIpSrcAddr For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osRfc2544SrcIpAddr. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.6926.2.7.5.1.15 |
| osRfc2544LengthTxPort . | column | OS-COMMON-TC-MIBPortIndexOrNone | .1.3.6.1.4.1.6926.2.7.5.1.16 |
| osRfc2544LengthVlanId . | column | - | .1.3.6.1.4.1.6926.2.7.5.1.17 |
| osRfc2544LengthMsgTransmitted Number of request packets transmitted the burst. | column | messages SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.21 |
| osRfc2544LengthMsgReceived Number of reply packets received in the burst. | column | messages SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.22 |
| osRfc2544LengthRttMin The minimum round-trip-time (RTT) received. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.23 |
| osRfc2544LengthRttMax The maximum round-trip-time (RTT) received. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.24 |
| osRfc2544LengthRttAverage The average round-trip-time (RTT) received. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.25 |
| osRfc2544LengthRttSum2 This object contains the sum of the squares for all
round-trip-times (RTT) received. Its purpose is to enable standard
deviation calculation. | column | square of microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.26 |
| osRfc2544LengthValue . | column | octets SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.3 |
| osRfc2544LengthJittMin The minimum value of all source-to-destination jitter values. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.30 |
| osRfc2544LengthJittMax The mahimum value of all source-to-destination jitter values. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.32 |
| osRfc2544LengthJittAverage The average value of all source-to-destination jitter values. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.33 |
| osRfc2544LengthJittSum2 This object contains the sum of the squares for all source-to-destination
jitter values. Its purpose is to enable standard
deviation calculation. | column | square of microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.34 |
| osRfc2544LengthDsJittMin The minimum value of all destination-to-source jitter values. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.35 |
| osRfc2544LengthDsJittMax The mahimum value of all destination-to-source jitter values. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.36 |
| osRfc2544LengthDsJittAverage The average value of all destination-to-source jitter values. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.37 |
| osRfc2544LengthDsJittSum2 This object contains the sum of the squares for all destination-to-source
jitter values. Its purpose is to enable standard
deviation calculation. | column | square of microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.38 |
| osRfc2544LengthStarted Timestamp, when this test has been started. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.6926.2.7.5.1.4 |
| osRfc2544LengthPcktLoss The calculation of packet loss value. | column | 0.01% SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.40 |
| osRfc2544LengthRate The rate of transmition frames in bursts.
Objects osRfc2544ResultsProbeInterval and osRfc2544ResultsRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osRfc2544Rate has been configure… | column | Kbits/sec SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.47 |
| osRfc2544LengthTestType . | column | TestType | .1.3.6.1.4.1.6926.2.7.5.1.5 |
| osRfc2544LengthPriority Priority number. | column | Unsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.55 |
| osRfc2544LengthDSField . | column | DSField | .1.3.6.1.4.1.6926.2.7.5.1.57 |
| osRfc2544LengthMdLevel Md Level number. | column | Unsigned32 | .1.3.6.1.4.1.6926.2.7.5.1.58 |
| osRfc2544LengthTestRunState . | column | TestRunState | .1.3.6.1.4.1.6926.2.7.5.1.7 |
| osRfc2544LengthProtocol Protocol of a test. | column | TestProtocol | .1.3.6.1.4.1.6926.2.7.5.1.8 |
| osRfc2544LengthAdminStatus . | column | Enumeration | .1.3.6.1.4.1.6926.2.7.5.1.99 |