osPtpSlaveTodUartBaudRate
OS-PTP-MIB ·
.1.3.6.1.4.1.6926.2.22.1.3.2.1.20
Object
scalar
r/w
Enumeration
Indicates the ptp Time-Of-Day UART Baud Rate configuration.
Context
- MIB
- OS-PTP-MIB
- OID
.1.3.6.1.4.1.6926.2.22.1.3.2.1.20- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- osPtpMIBSlaveCfgGen
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | unknown |
1 | none |
2 | baud1200 |
3 | baud2400 |
4 | baud4800 |
5 | baud9600 |
6 | baud19200 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| osPtpSlaveAdminStatus Enable/Disable/Clear configuration PTP protocol. | scalar | Enumeration | .1.3.6.1.4.1.6926.2.22.1.3.2.1.1 |
| osPtpSlaveDelayRequestInterval The mean time interval between successive DelayRequest messages
represented as the logarithm to the base 2 | scalar | ClockIntervalBase2 | .1.3.6.1.4.1.6926.2.22.1.3.2.1.10 |
| osPtpSlaveAnnounceInterval The mean time interval between successive Announce messages
represented as the logarithm to the base 2 | scalar | ClockIntervalBase2 | .1.3.6.1.4.1.6926.2.22.1.3.2.1.11 |
| osPtpSlaveSyncInterval The mean time interval between successive Sync messages
represented as the logarithm to the base 2 | scalar | ClockIntervalBase2 | .1.3.6.1.4.1.6926.2.22.1.3.2.1.12 |
| osPtpSlavePortVifName vif used by the ptp port and ther ports in the optiswitch
used to communicate with ptp masters | scalar | OctetString | .1.3.6.1.4.1.6926.2.22.1.3.2.1.2 |
| osPtpSlavePortTxMode This object specifies the clock transmission mode as
unicast: Using unicast communication channel.
multicast: Using Multicast communication channel.
multicast-mix: Using… | scalar | ClockTxModeType | .1.3.6.1.4.1.6926.2.22.1.3.2.1.21 |
| osPtpSlaveDirection direction of ptp used for time calculation
both: Both directions: SlaveToMaster as well as MasterToSlave are acceptable. (Default.)
slaveToMaster: Only the direction slaveToMaster… | scalar | Enumeration | .1.3.6.1.4.1.6926.2.22.1.3.2.1.22 |
| osPtpSlaveDomainIndex This object specifies the domain number used to create logical
group of PTP devices. | scalar | ClockDomainType | .1.3.6.1.4.1.6926.2.22.1.3.2.1.23 |
| osPtpSlaveOutClkFrequency Frequency on PtpOut pin, measured in Khz
no output value is 0 | scalar | Integer32 | .1.3.6.1.4.1.6926.2.22.1.3.2.1.24 |
| osPtpSlaveAddressType Type of address used by the ptp Slave | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6926.2.22.1.3.2.1.3 |
| osPtpSlaveDirectMasterOnly indicates if masters that are not in the osPtpSlaveDirectMasterTable
can be used as masters | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.22.1.3.2.1.30 |
| osPtpSlaveGatewayAddress Network Address (of the type osPtpSlaveAddressType) of Gateway used
by the ptp port used to find ptp masters outside the subnet
(not needed if the Vif Address can function as a… | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.6926.2.22.1.3.2.1.4 |
| osPtpSlavePortAddrPrefixLength Length of the Subnet Prefix that the ptp port is in | scalar | INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.6926.2.22.1.3.2.1.5 |
| osPtpSlavePortAddress Network Address (of the type osPtpSlaveAddressType) of the ptp port | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.6926.2.22.1.3.2.1.6 |