osSoamPmLmPrflNumSynthFramesFlr
OS-PROV-SOAM-PM-MIB ·
.1.3.6.1.4.1.6926.2.10.33.1.2.2.1.11
Object
column
r/w
Unsigned32
This object specifies the number of consecutive synthetic loss measurement
frames to use in order to calculate the frame loss ratio.
This object is only valid for lmSLM LM measurements. It is
ignored for lmLMM, and lmCcm measurement types.
When data frame loss is being measured using LMM or CCM the FLR
can be calculated for each measurement. However, when synthetic frame
loss is being measured, using SLM, each measurement yields only a
boolean result, i.e. the frame was either lost, or it was not lost. In this
case, a number of measurements need to be made before a sensible FLR can be
calculated. This object specifies that number.
The FLR is calculated after the specified number of measurement frames have
been sent, and sufficient time has passed after the last frame was sent to
allow for them, or the corresponding replies, to have been received.
Successive FLR calculations are performed for successive blocks of measurement
frames, for example if this object is set to 10, then sending 50 frames
results in 5 FLR calculations: the first for frames 0 - 9, the next for
frames 10 - 19, etc.
Context
- MIB
- OS-PROV-SOAM-PM-MIB
- OID
.1.3.6.1.4.1.6926.2.10.33.1.2.2.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- osSoamPmLmPrflEntry
- Table
- osSoamPmLmPrflTable
- Siblings
- 11
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-100000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| osSoamPmLmPrflId Id of the profile. | column | OS-COMMON-TC-MIBEntityName | .1.3.6.1.4.1.6926.2.10.33.1.2.2.1.1 |
| osSoamPmLmPrflAvailNumConHighFlr This attribute specifies a configurable number of consecutive FLR
measurements to be used for assessing CHLI. This parameter is equivalent
to the Resilency parameter of 'p' as sp… | column | Unsigned32 | .1.3.6.1.4.1.6926.2.10.33.1.2.2.1.10 |
| osSoamPmLmPrflType This attribute specifies what type of Loss Measurement
will be performed.
lmLmm(1) LMM SOAM PDU generated and received LMR responses tracked
lmSlm(2) … | column | Enumeration | .1.3.6.1.4.1.6926.2.10.33.1.2.2.1.2 |
| osSoamPmLmPrflVersion This attribute indicates the version of the PDUs used to perform
Loss Measurement.
Version 0 indicates the PDU formats defined in Y.1731-2008.
Version 1 indicates … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.10.33.1.2.2.1.3 |
| osSoamPmLmPrflMeasurementEnable Indicates LM Measurement values supported by the LM Profile. | column | SoamLmCapabilities | .1.3.6.1.4.1.6926.2.10.33.1.2.2.1.4 |
| osSoamPmLmPrflAvailMeasInt This attribute specifies the availability measurement interval in
minutes.
A measurement interval of 15 minutes is to be supported, other intervals
can be supporte… | column | minutes Unsigned32 | .1.3.6.1.4.1.6926.2.10.33.1.2.2.1.6 |
| osSoamPmLmPrflAvailFlrThr This attribute specifies a configurable availability threshold to be
used in evaluating the availability/unavailability status of an
availability indicator per MEF 10.2.1. The ava… | column | milli-percent Unsigned32 | .1.3.6.1.4.1.6926.2.10.33.1.2.2.1.8 |
| osSoamPmLmPrflAvailNumConsInts This object specifies a configurable number of consecutive
availability indicators to be used to determine a change in the
availability status as indicated by MEF 10.2.1. This par… | column | Unsigned32 | .1.3.6.1.4.1.6926.2.10.33.1.2.2.1.9 |
| osSoamPmLmPrflLastError Last configuration error description. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6926.2.10.33.1.2.2.1.97 |
| osSoamPmLmPrflAdminStatus . | column | OS-COMMON-TC-MIBEntryValidator | .1.3.6.1.4.1.6926.2.10.33.1.2.2.1.98 |
| osSoamPmLmPrflOperStatus . | column | OS-COMMON-TC-MIBProfileStatus | .1.3.6.1.4.1.6926.2.10.33.1.2.2.1.99 |