osProvRfc2544RsltAccumProbeInterval
OS-PROV-RFC2544-MIB ·
.1.3.6.1.4.1.6926.2.11.13.1.46
Object
The interval between packets. Objects osProvRfc2544RsltAccumProbeInterval and osProvRfc2544RsltAccumRate MUST ALWAYS CORRESPOND TO EACH OTHER. If osProvRfc2544Rate has been configured as equal to 0, then agent returns osProvRfc2544ProbeInterval equal to osProvRfc2544RsltAccumProbeInterval. If osProvRfc2544Rate has been configured as not equal to 0, then agent calculates interval between packets, corresponding to osProvRfc2544Rate and returns it as osProvRfc2544RsltAccumProbeInterval.
Context
- MIB
- OS-PROV-RFC2544-MIB
- OID
.1.3.6.1.4.1.6926.2.11.13.1.46- Type
- column
- Access
- readonly
- Status
- current
- Units
- microseconds
- Parent
- osProvRfc2544RsltAccumEntry
- Table
- osProvRfc2544RsltAccumTable
- Siblings
- 29
Syntax
microseconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| osProvRfc2544RsltAccumProtocol Protocol of a test. | column | TestProtocol | .1.3.6.1.4.1.6926.2.11.13.1.10 |
| osProvRfc2544RsltAccumDstMac For Layer 2 tests is equal to osProvRfc2544CfgDstMac, for Layer 3 tests agent may place MAC
address of NextHop. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6926.2.11.13.1.11 |
| osProvRfc2544RsltAccumSrcMac For Layer 2 tests is equal to osProvRfc2544CfgSrcMac, for Layer 3 tests agent may place MAC
address of source interface. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6926.2.11.13.1.12 |
| osProvRfc2544RsltAccumIpDstType For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpType. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6926.2.11.13.1.13 |
| osProvRfc2544RsltAccumIpDstAddr For Layer 2 tests this object has no meaning, for Layer 3 it corresponds to osProvRfc2544CfgDstIpAddr. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.6926.2.11.13.1.14 |
| osProvRfc2544RsltAccumTxPort . | column | OS-COMMON-TC-MIBPortIndexOrNone | .1.3.6.1.4.1.6926.2.11.13.1.16 |
| osProvRfc2544RsltAccumTransmitted Number of request packets transmitted the burst. | column | messages SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.21 |
| osProvRfc2544RsltAccumReceived Number of reply packets received in the burst. | column | messages SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.22 |
| osProvRfc2544RsltAccumRttMin The minimum round-trip-time (RTT) received. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.23 |
| osProvRfc2544RsltAccumRttMax The maximum round-trip-time (RTT) received. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.24 |
| osProvRfc2544RsltAccumRttAverage The average round-trip-time (RTT) received. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.25 |
| osProvRfc2544RsltAccumRttSum2 This object contains the sum of the squares for all
round-trip-times (RTT) received. Its purpose is to enable standard
deviation calculation. | column | square of microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.26 |
| osProvRfc2544RsltAccumJittMin The minimum value of all source-to-destination jitter values. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.30 |
| osProvRfc2544RsltAccumJittMax The mahimum value of all source-to-destination jitter values. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.32 |
| osProvRfc2544RsltAccumJittAverage The average value of all source-to-destination jitter values. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.33 |
| osProvRfc2544RsltAccumJittSum2 This object contains the sum of the squares for all source-to-destination
jitter values. Its purpose is to enable standard
deviation calculation. | column | square of microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.34 |
| osProvRfc2544RsltAccumDsJittMin The minimum value of all destination-to-source jitter values. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.35 |
| osProvRfc2544RsltAccumDsJittMax The mahimum value of all destination-to-source jitter values. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.36 |
| osProvRfc2544RsltAccumDsJittAverage The average value of all destination-to-source jitter values. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.37 |
| osProvRfc2544RsltAccumDsJittSum2 This object contains the sum of the squares for all destination-to-source
jitter values. Its purpose is to enable standard
deviation calculation. | column | square of microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.38 |
| osProvRfc2544RsltAccumStarted Timestamp, when this test has been started. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.6926.2.11.13.1.4 |
| osProvRfc2544RsltAccumPcktLoss The calculation of packet loss value. | column | 0.01% SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.40 |
| osProvRfc2544RsltAccumRate The rate of transmition frames in bursts.
Objects osProvRfc2544RsltAccumProbeInterval and osProvRfc2544RsltAccumRate MUST ALWAYS CORRESPOND
TO EACH OTHER.
If osProvRfc2544Rate ha… | column | Kbits/sec SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.47 |
| osProvRfc2544RsltAccumPacketLength This object is equal to corresponding osProvRfc2544PacketLength. | column | octets SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.48 |
| osProvRfc2544RsltAccumBurstsNumber Corresponding osRfc2544HistoryIndex. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.5 |
| osProvRfc2544RsltAccumTotalDuration Corresponding osRfc2544HistoryIndex. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.13.1.6 |
| osProvRfc2544RsltAccumTestType . | column | TestType | .1.3.6.1.4.1.6926.2.11.13.1.7 |
| osProvRfc2544RsltAccumRespType . | column | OS-COMMON-TC-MIBRespType | .1.3.6.1.4.1.6926.2.11.13.1.8 |
| osProvRfc2544RsltAccumTestRunState . | column | TestRunState | .1.3.6.1.4.1.6926.2.11.13.1.9 |