osPortDescription
OS-PORT-MIB ·
.1.3.6.1.4.1.6926.2.1.2.1.3
Object
column
r/w
OctetString
Port description.
Default description for physical port: 'Port <port index> - <port type'
for trunk: 'TRUNK <trunk id>'
Context
- MIB
- OS-PORT-MIB
- OID
.1.3.6.1.4.1.6926.2.1.2.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- osPortEntry
- Table
- osPortTable
- Siblings
- 37
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-80
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| osPortIndex Port index. | column | OS-COMMON-TC-MIBPortIndex | .1.3.6.1.4.1.6926.2.1.2.1.1 |
| osPortAdminState Port admin state: enabled/disabledByMgmt | column | Enumeration | .1.3.6.1.4.1.6926.2.1.2.1.10 |
| osPortLanType Port installed LAN type (if exists): none/eth10/eth100/eth10or100/... | column | Enumeration | .1.3.6.1.4.1.6926.2.1.2.1.100 |
| osPortIfType Port installed physical interface (if any): aui/tp... | column | Enumeration | .1.3.6.1.4.1.6926.2.1.2.1.101 |
| osPortLastError Last configuration error description. | column | LastError | .1.3.6.1.4.1.6926.2.1.2.1.102 |
| osPortOperState Port oper status | column | Enumeration | .1.3.6.1.4.1.6926.2.1.2.1.11 |
| osPortBlockReason Port block reason (why port doesn't forward packets while link is up).
See also Bridge.MIB for STP state per VlanId. | column | Bits | .1.3.6.1.4.1.6926.2.1.2.1.12 |
| osPortLink Port link status. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.1.2.1.5 |
| osPortBuffersProfileIndex Buffers profile assigned to the port. | column | BuffersProfileIndex | .1.3.6.1.4.1.6926.2.1.2.1.50 |
| osPortAdminSpeed Port speed: 10/100/1000/2500/10000/auto | column | Enumeration | .1.3.6.1.4.1.6926.2.1.2.1.6 |
| osPortTrunkIndex Port index of trunk if port is a member of trunk.
Otherwise, it is 0 (zero). | column | OS-COMMON-TC-MIBPortIndexOrNone | .1.3.6.1.4.1.6926.2.1.2.1.60 |
| osPortLacpAdminMode Port LACP admin mode:
disabled - LACP is not active
rapid - MRV's optimization for LACP
passive - LACP passive mode
active - LACP is active | column | Enumeration | .1.3.6.1.4.1.6926.2.1.2.1.61 |
| osPortLacpOperState Port LACP oper mode:
nonLacp - LACP is not active
blocked - port is LACP blocked
enabled - LACP is active | column | Enumeration | .1.3.6.1.4.1.6926.2.1.2.1.62 |
| osPortMtuSize Port MTU size | column | Unsigned32 | .1.3.6.1.4.1.6926.2.1.2.1.66 |
| osPortOperSpeed Port real speed in MBps | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6926.2.1.2.1.7 |
| osPortQosMarkingVpt Port QoS marking mode: vpt/dscp/vptdscp | column | Enumeration | .1.3.6.1.4.1.6926.2.1.2.1.70 |
| osPortQosTrust port QoS trust mode:
l2 - L2 VPT trust mode
l3 - L3 DSCP trust mode
l2l3 - L3 DSCP mode for IP packets, L2 VPT mode for non IP packets
port - Port service level (see osPortSl) | column | Enumeration | .1.3.6.1.4.1.6926.2.1.2.1.71 |
| osPortRemarkingDei DEI bit remarking on egress:
preserveDei - Packet egress with same DEI it ingressed
remarkDei - Packet DEI bit is set according to DP | column | Enumeration | .1.3.6.1.4.1.6926.2.1.2.1.72 |
| osPortSl Port service level (useable if osPortQosTrust is in port mode)
Actual maximum value may be obtained in osPortCfgMaxNumberOfSl | column | Unsigned32 | .1.3.6.1.4.1.6926.2.1.2.1.78 |
| osPortTagType Port tag-outbound mode:
tagged - Tagged port
untaggedSingleVlan - Adds default tag for incoming untagged packets
untaggedMultiVlans - Adds a certain tag for incoming u… | column | Enumeration | .1.3.6.1.4.1.6926.2.1.2.1.80 |
| osPortTagDefaultTag Port default tag. Has sence only for untaggedSingleVlan(3), hybrid(5) and qInQ(6). | column | - | .1.3.6.1.4.1.6926.2.1.2.1.81 |
| osPortL2CtrlDot1x .1x L2 protocol (see L2CtrlProcess description) | column | L2CtrlProcess | .1.3.6.1.4.1.6926.2.1.2.1.83 |
| osPortL2CtrlLACP LACP L2 protocol (see L2CtrlProcess description) | column | L2CtrlProcess | .1.3.6.1.4.1.6926.2.1.2.1.84 |
| osPortL2CtrlSTP STP L2 protocol (see L2CtrlProcess description) | column | L2CtrlProcess | .1.3.6.1.4.1.6926.2.1.2.1.85 |
| osPortL2CtrlGVRP GVRP L2 protocol (see L2CtrlProcess description) | column | L2CtrlProcess | .1.3.6.1.4.1.6926.2.1.2.1.86 |
| osPortL2CtrlPause Pause L2 protocol (see L2CtrlProcess description) | column | L2CtrlProcess | .1.3.6.1.4.1.6926.2.1.2.1.87 |
| osPortL2CtrlLinkOAM LinkOam L2 protocol (see L2CtrlProcess description) | column | L2CtrlProcess | .1.3.6.1.4.1.6926.2.1.2.1.88 |
| osPortL2CtrlELMI .ELMI L2 protocol (see L2CtrlProcess description) | column | L2CtrlProcess | .1.3.6.1.4.1.6926.2.1.2.1.89 |
| osPortDuplex Port duplex mode: full/half | column | Enumeration | .1.3.6.1.4.1.6926.2.1.2.1.9 |
| osPortL2CtrlLLDP LLDP L2 protocol (see L2CtrlProcess description) | column | L2CtrlProcess | .1.3.6.1.4.1.6926.2.1.2.1.90 |
| osPortL2CtrlDTP DTP L2 protocol (see L2CtrlProcess description) | column | L2CtrlProcess | .1.3.6.1.4.1.6926.2.1.2.1.91 |
| osPortL2CtrlPAGP PAGP L2 protocol (see L2CtrlProcess description) | column | L2CtrlProcess | .1.3.6.1.4.1.6926.2.1.2.1.92 |
| osPortL2CtrlVTP VTP L2 protocol (see L2CtrlProcess description) | column | L2CtrlProcess | .1.3.6.1.4.1.6926.2.1.2.1.95 |
| osPortL2CtrlCDP CDP L2 protocol (see L2CtrlProcess description) | column | L2CtrlProcess | .1.3.6.1.4.1.6926.2.1.2.1.96 |
| osPortL2CtrlPVST PVST L2 protocol (see L2CtrlProcess description) | column | L2CtrlProcess | .1.3.6.1.4.1.6926.2.1.2.1.97 |
| osPortAdminMediaSelect Port Media-Select admin mode: notApplicable/sfp/sfp100/copper/auto/sfpAutoDetect | column | Enumeration | .1.3.6.1.4.1.6926.2.1.2.1.98 |
| osPortOperMediaSelect Port Media-Select oper mode: notApplicable/sfp/sfp100/copper/sfpAutoDetect | column | Enumeration | .1.3.6.1.4.1.6926.2.1.2.1.99 |