osEthPerfFdRiseThold

OS-ETH-SERV-MIB · .1.3.6.1.4.1.6926.2.10.14.1.35
MIB view Table view

Object

column r/w microseconds Unsigned32 
Frame delay (Average of Round Trip Time) Rising threshold.
Value 0 means, that this the agent will not check this tipe of threshold.

Context

MIB
OS-ETH-SERV-MIB
OID
.1.3.6.1.4.1.6926.2.10.14.1.35
Type
column
Access
readwrite
Status
current
Units
microseconds
Parent
osEthPerfEntry
Table
osEthPerfTable
Siblings
23

Syntax

microseconds Unsigned32

Values & Constraints

Object Constraints
range: 0-10000000

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
osEthPerfVlanDropEnable
Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enable, please check IEEE 802.1ad.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6926.2.10.14.1.12
osEthPerfHistorySize
.
columnUnsigned32.1.3.6.1.4.1.6926.2.10.14.1.17
osEthPerfInterval
Inter-frame delay between transmitting of Loopback frames to the destination
columnmicroseconds Unsigned32.1.3.6.1.4.1.6926.2.10.14.1.18
osEthPerfTimeout
Timeout for the arrival of Loopback reply
columnmilliseconds Unsigned32.1.3.6.1.4.1.6926.2.10.14.1.19
osEthPerfDataLength
Loopback message data length. Used to send Loopback messages in different lengths
columnoctets Unsigned32.1.3.6.1.4.1.6926.2.10.14.1.20
osEthPerfDataFill
.
columnOctetString.1.3.6.1.4.1.6926.2.10.14.1.21
osEthPerfMessages
The number of messages in a burst
columnpackets Unsigned32.1.3.6.1.4.1.6926.2.10.14.1.23
osEthPerfBurstInterval
Interval between bursts.
columnseconds Unsigned32.1.3.6.1.4.1.6926.2.10.14.1.24
osEthPerfNumberOfBursts
Number of bursts in the test. The value 0 means continuous test.
columnbursts Unsigned32.1.3.6.1.4.1.6926.2.10.14.1.25
osEthPerfMeasBinsInterval
.
columnminutes Unsigned32.1.3.6.1.4.1.6926.2.10.14.1.26
osEthPerfMeasBinsIsAlign
A SOAM implementation should align the start of a measurement interval on osEthPerfMeasBinsInterval boundary of the local time-of-day clock.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6926.2.10.14.1.27
osEthPerfMeasBinsClockSyncFlag
This attribute specifies whether the clocks for both end points are synchronized. This attribute controls whether one-way measurements are computed.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6926.2.10.14.1.28
osEthPerfMeasBinsHistorySize
.
columnUnsigned32.1.3.6.1.4.1.6926.2.10.14.1.29
osEthPerfId
.
columnOS-COMMON-TC-MIBEntityName.1.3.6.1.4.1.6926.2.10.14.1.3
osEthPerfFdFallThold
Frame delay (Average of Round Trip Time) Falling threshold
columnmicroseconds Unsigned32.1.3.6.1.4.1.6926.2.10.14.1.36
osEthPerfType
This object defines a protocol of Frame Delay Measurement.The values mean: dmm - two-way ETH-DM (ITU-T Y.1731, Clause 8.2.2) dmmSlow - the same as dmm, but less precise and ma…
columnEnumeration.1.3.6.1.4.1.6926.2.10.14.1.4
osEthPerfDSJittRiseThold
Destination-Source positive jitter Rising threshold. Value 0 means, that this the agent will not check this tipe of threshold.
columnmicroseconds Unsigned32.1.3.6.1.4.1.6926.2.10.14.1.49
osEthPerfDSJittFallThold
Destination-Source positive jitter Falling threshold.
columnmicroseconds Unsigned32.1.3.6.1.4.1.6926.2.10.14.1.50
osEthPerfSDJittRiseThold
Source-Destination positive jitter Rising threshold. Value 0 means, that this the agent will not check this tipe of threshold.
columnmicroseconds Unsigned32.1.3.6.1.4.1.6926.2.10.14.1.63
osEthPerfSDJittFallThold
Source-Destination positive jitter Falling threshold.
columnmicroseconds Unsigned32.1.3.6.1.4.1.6926.2.10.14.1.64
osEthPerfLastError
.
columnOctetString.1.3.6.1.4.1.6926.2.10.14.1.65
osEthPerfAdminStatus
Allows to create new rows or delete old rows.
columnOS-COMMON-TC-MIBEntryValidator.1.3.6.1.4.1.6926.2.10.14.1.98
osEthPerfOperStatus
.
columnOS-COMMON-TC-MIBProfileStatus.1.3.6.1.4.1.6926.2.10.14.1.99