orinocoWORPIfDDRS
ORiNOCO-MIB ·
.1.3.6.1.4.1.11898.2.1.2.5.6
Object
node
No description available.
Context
- MIB
- ORiNOCO-MIB
- OID
.1.3.6.1.4.1.11898.2.1.2.5.6- Type
- node
- Parent
- orinocoWORPIf
- Siblings
- 6
- Children
- 24
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| oriWORPIfConfigTable This table is used to configure the mode, time-outs, and protocol
objects for wireless interface(s) that are configured to run WORP. | table | - | .1.3.6.1.4.1.11898.2.1.2.5.1 |
| oriWORPIfStatTable This table is used to monitor the statistics of interfaces that
run WORP. | table | - | .1.3.6.1.4.1.11898.2.1.2.5.2 |
| orinocoWORPIfSat | node | - | .1.3.6.1.4.1.11898.2.1.2.5.3 |
| orinocoWORPIfSiteSurvey | node | - | .1.3.6.1.4.1.11898.2.1.2.5.4 |
| orinocoWORPIfRoaming | node | - | .1.3.6.1.4.1.11898.2.1.2.5.5 |
| orinocoWORPIfBSU | node | - | .1.3.6.1.4.1.11898.2.1.2.5.7 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| oriWORPIfDDRSStatus This is object is used to enable/disable the WORP DDRS feature on
the BSU. | scalar | ObjStatus | .1.3.6.1.4.1.11898.2.1.2.5.6.1 |
| oriWORPIfDDRSMinReqSNRdot11an48Mbps This is to specify the minimum required SNR for data rate
of 48Mbps on 802.11a radio, normal mode. The value should be
in dB and in the range 0..50 dB. The default value should… | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.10 |
| oriWORPIfDDRSMinReqSNRdot11an54Mbps This is to specify the minimum required SNR for data rate
of 54Mbps on 802.11a radio, normal mode. The value should be
in dB and in the range 0..50 dB. The default value should… | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.11 |
| oriWORPIfDDRSMinReqSNRdot11at12Mbps This is to specify the minimum required SNR for data rate
of 12Mbps on 802.11a radio, turbo mode. The value should be
in dB and in the range 0..50 dB. The default value should … | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.12 |
| oriWORPIfDDRSMinReqSNRdot11at18Mbps This is to specify the minimum required SNR for data rate
of 18Mbps on 802.11a radio, turbo mode. The value should be
in dB and in the range 0..50 dB. The default value should … | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.13 |
| oriWORPIfDDRSMinReqSNRdot11at24Mbps This is to specify the minimum required SNR for data rate
of 24Mbps on 802.11a radio, turbo mode. The value should be
in dB and in the range 0..50 dB. The default value should … | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.14 |
| oriWORPIfDDRSMinReqSNRdot11at36Mbps This is to specify the minimum required SNR for data rate
of 36Mbps on 802.11a radio, turbo mode. The value should be
in dB and in the range 0..50 dB. The default value should … | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.15 |
| oriWORPIfDDRSMinReqSNRdot11at48Mbps This is to specify the minimum required SNR for data rate
of 48Mbps on 802.11a radio, turbo mode. The value should be
in dB and in the range 0..50 dB. The default value should … | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.16 |
| oriWORPIfDDRSMinReqSNRdot11at72Mbps This is to specify the minimum required SNR for data rate
of 72Mbps on 802.11a radio, turbo mode. The value should be
in dB and in the range 0..50 dB. The default value should … | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.17 |
| oriWORPIfDDRSMinReqSNRdot11at96Mbps This is to specify the minimum required SNR for data rate
of 96Mbps on 802.11a radio, turbo mode. The value should be
in dB and in the range 0..50 dB. The default value should … | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.18 |
| oriWORPIfDDRSMinReqSNRdot11at108Mbps This is to specify the minimum required SNR for data rate
of 108Mbps on 802.11a radio, turbo mode. The value should be
in dB and in the range 0..50 dB. The default value should… | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.19 |
| oriWORPIfDDRSDefDataRate This is the data rate that shall be used only when DDRS
is enabled. This is to specify default data rate on BSU.
The possible values of the variable shall be:
1. 802.11a normal m… | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.2 |
| oriWORPIfDDRSDataRateIncAvgSNRThreshold This is to specify average SNR threshold for data rate increase.
The value should be in dB and in the range 0..50 dB.
The default value should be 4 dB. | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.20 |
| oriWORPIfDDRSDataRateIncReqSNRThreshold This is to specify average SNR threshold for data rate decrease.
The value should be in dB and in the range 0..50 dB.
The default value should be 6 dB. | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.21 |
| oriWORPIfDDRSDataRateDecReqSNRThreshold This is to specify SNRreq threshold for data rate reduction.
The value should be in dB and in the range 0..50 dB.
The default value should be 3 dB. | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.22 |
| oriWORPIfDDRSDataRateIncPercentThreshold This object specifies the threshold percentage of retransmissions for
DDRS data rate increase. | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.23 |
| oriWORPIfDDRSDataRateDecPercentThreshold This object specifies the threshold percentage of retransmissions for
DDRS data rate decrease. | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.24 |
| oriWORPIfDDRSMaxDataRate This is the data rate that shall be used only when DDRS
is enabled. This is to limit maximum possible data rate
that is set by DDRS on BSU.
The possible values of the variable sh… | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.3 |
| oriWORPIfDDRSMinReqSNRdot11an6Mbps This is to specify the minimum required SNR for data rate
of 6Mbps on 802.11a radio, normal mode. The value should be
in dB and in the range 0..50 dB. The default value should … | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.4 |
| oriWORPIfDDRSMinReqSNRdot11an9Mbps This is to specify the minimum required SNR for data rate
of 9Mbps on 802.11a radio, normal mode. The value should be
in dB and in the range 0..50 dB. The default value should … | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.5 |
| oriWORPIfDDRSMinReqSNRdot11an12Mbps This is to specify the minimum required SNR for data rate
of 12Mbps on 802.11a radio, normal mode. The value should be
in dB and in the range 0..50 dB. The default value should… | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.6 |
| oriWORPIfDDRSMinReqSNRdot11an18Mbps This is to specify the minimum required SNR for data rate
of 18Mbps on 802.11a radio, normal mode. The value should be
in dB and in the range 0..50 dB. The default value should… | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.7 |
| oriWORPIfDDRSMinReqSNRdot11an24Mbps This is to specify the minimum required SNR for data rate
of 24Mbps on 802.11a radio, normal mode. The value should be
in dB and in the range 0..50 dB. The default value should… | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.8 |
| oriWORPIfDDRSMinReqSNRdot11an36Mbps This is to specify the minimum required SNR for data rate
of 36Mbps on 802.11a radio, normal mode. The value should be
in dB and in the range 0..50 dB. The default value should… | scalar | Integer32 | .1.3.6.1.4.1.11898.2.1.2.5.6.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| AC-PM-ATM-MIBacPMAtmCellTxInterface obsolete Atm interface 0,1 and 2. | column | Integer32 | .1.3.6.1.4.1.5003.10.12.2.21.1.1 |
| AC-PM-ATM-MIBacPMAtmCellTxInterval obsolete Interval index.
0 - current period (incomplete monitoring - mid period).
1 - Last full period.
2 - One before last. | column | Integer32 | .1.3.6.1.4.1.5003.10.12.2.21.1.2 |