oriWirelessIfSSIDTableDenyNonEncryptedData

ORiNOCO-MIB · .1.3.6.1.4.1.11898.2.1.2.1.3.1.18
MIB view Table view

Object

column deprecated r/w ObjStatus 
This object is used to enable/disable deny non encrypted data.  This
function is only supported when the security mode is configured to
WEP or Mixed Mode; it is not supported for 802.1x, WPA, and WPA-PSK
security modes.  This object is deprecated.

Context

MIB
ORiNOCO-MIB
OID
.1.3.6.1.4.1.11898.2.1.2.1.3.1.18
Type
column
Access
readwrite
Status
deprecated
Parent
oriWirelessIfSSIDTableEntry
Table
oriWirelessIfSSIDTable
Siblings
26

Syntax

ObjStatus
Source
ObjStatus
Base type
Enumeration

Values & Constraints

Type Values
1enable
2disable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
oriWirelessIfSSIDTableIndex
This object represents the index to the SSID Table.
columnInteger32.1.3.6.1.4.1.11898.2.1.2.1.3.1.1
oriWirelessIfSSIDTableEncryptionKey1 deprecated
This object represents Encryption Key 1. This object should be treated as write-only and returned as asterisks. This object is deprecated.
columnWEPKeyType.1.3.6.1.4.1.11898.2.1.2.1.3.1.10
oriWirelessIfSSIDTableEncryptionKey2 deprecated
This object represents Encryption Key 2. This object should be treated as write-only and returned as asterisks. This object is deprecated.
columnWEPKeyType.1.3.6.1.4.1.11898.2.1.2.1.3.1.11
oriWirelessIfSSIDTableEncryptionKey3 deprecated
This object represents Encryption Key 3. This object should be treated as write-only and returned as asterisks. This object is deprecated.
columnWEPKeyType.1.3.6.1.4.1.11898.2.1.2.1.3.1.12
oriWirelessIfSSIDTableEncryptionTxKey deprecated
This object indicates which encryption key is used to encrypt data that is sent via the wireless interfaces. The default value for this object should be key 0. This object is d…
columnInteger32.1.3.6.1.4.1.11898.2.1.2.1.3.1.13
oriWirelessIfSSIDTableEncryptionKeyLength deprecated
This object represents the encryption key length, the supported key lengths are 64 bits (40 + 24 for IV), 128 bits (104 + 24 for IV), and 152 bits (128 + 24 for IV). This object…
columnEnumeration.1.3.6.1.4.1.11898.2.1.2.1.3.1.14
oriWirelessIfSSIDTableRekeyingInterval
This object represents the encryption rekeying interval. if this object is configured to zero (0) rekeying is disabled. The units of this object is seconds.
columnInteger32.1.3.6.1.4.1.11898.2.1.2.1.3.1.15
oriWirelessIfSSIDTablePSKValue deprecated
The Pre-Shared Key (PSK) for when RSN in PSK mode is the selected authentication suite. In that case, the PMK will obtain its value from this object. This object is logically…
columnOctetString.1.3.6.1.4.1.11898.2.1.2.1.3.1.16
oriWirelessIfSSIDTablePSKPassPhrase deprecated
The PSK, for when RSN in PSK mode is the selected authentication suite, is configured by oriWirelessIfSSIDTablePSKValue. An alternative manner of setting the PSK uses the passw…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.11898.2.1.2.1.3.1.17
oriWirelessIfSSIDTableSSIDAuthorizationStatus
This object is used to enable or disable SSID Authorization.
columnObjStatus.1.3.6.1.4.1.11898.2.1.2.1.3.1.19
oriWirelessIfSSIDTableSSID
This object represents the wireless card SSID string (wireless network name).
columnOctetString.1.3.6.1.4.1.11898.2.1.2.1.3.1.2
oriWirelessIfSSIDTableMACAccessControl
This object is used to enable or disable MAC Access Control feature/filter for this SSID.
columnObjStatus.1.3.6.1.4.1.11898.2.1.2.1.3.1.20
oriWirelessIfSSIDTableRADIUSMACAccessControl
This object is used to enables RADIUS Access Control based on wireless stations MAC Address.
columnObjStatus.1.3.6.1.4.1.11898.2.1.2.1.3.1.21
oriWirelessIfSSIDTableSecurityProfile
This object is used to configure the security profile that will be used for this SSID. The security profile is defined in the Security Profile Table in the orinocoSecurity group.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11898.2.1.2.1.3.1.22
oriWirelessIfSSIDTableRADIUSDot1xProfile
This object is used to configure the RADIUS server profile that will be used for 802.1x authentication for this SSID. The RADIUS profile is defined in the RADIUS Server Table in …
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.11898.2.1.2.1.3.1.23
oriWirelessIfSSIDTableRADIUSMACAuthProfile
This object is used to configure the RADIUS server profile that will be used for MAC based RADIUS authentication for this SSID. The RADIUS profile is defined in the RADIUS Server…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.11898.2.1.2.1.3.1.24
oriWirelessIfSSIDTableRADIUSAccountingStatus
This object is used to enable or disable the RADIUS Accounting service per SSID.
columnObjStatus.1.3.6.1.4.1.11898.2.1.2.1.3.1.25
oriWirelessIfSSIDTableRADIUSAccountingProfile
This object is used to configure the RADIUS server profile that will be used for Accounting for this SSID. The RADIUS profile is defined in the RADIUS Server Table in the orino…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.11898.2.1.2.1.3.1.26
oriWirelessIfSSIDTableQoSPolicy
This object is used to configure the QoS policy that will be used for this SSID. The QoS profile is defined in the QoS Policy Table in the orinocoQoS group.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11898.2.1.2.1.3.1.27
oriWirelessIfSSIDTableVLANID
This object represents the VLAN Identifier (ID).
columnVlanId.1.3.6.1.4.1.11898.2.1.2.1.3.1.3
oriWirelessIfSSIDTableStatus
This object represents the wireless SSID table row/entry status.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.11898.2.1.2.1.3.1.4
oriWirelessIfSSIDTableSecurityMode deprecated
This object is used to configure the security mode for this table entry (SSID). This object is deprecated.
columnEnumeration.1.3.6.1.4.1.11898.2.1.2.1.3.1.5
oriWirelessIfSSIDTableBroadcastSSID
This object is used to enable/disable a broadcast SSID in the SSID table. A single entry in the SSID table can be enabled to broadcast SSID in beacon messages.
columnObjStatus.1.3.6.1.4.1.11898.2.1.2.1.3.1.6
oriWirelessIfSSIDTableClosedSystem
This object is used to enable/disable the closed system feature for this table entry (SSID).
columnObjStatus.1.3.6.1.4.1.11898.2.1.2.1.3.1.7
oriWirelessIfSSIDTableSupportedSecurityModes deprecated
This object is used to provide information on the supported security modes by the wireless interface(s). The possible security modes can be: - None: no security mode ena…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.11898.2.1.2.1.3.1.8
oriWirelessIfSSIDTableEncryptionKey0 deprecated
This object represents Encryption Key 0. This object should be treated as write-only and returned as asterisks. This object is deprecated.
columnWEPKeyType.1.3.6.1.4.1.11898.2.1.2.1.3.1.9