oriSystemFlashUpdate

ORiNOCO-MIB · .1.3.6.1.4.1.11898.2.1.1.7
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
When this variable is set, all the objects that are
to be comitted to flash will be written to flash. This
will be done immediately after the value is set, regardless
of the value set.

Context

MIB
ORiNOCO-MIB
OID
.1.3.6.1.4.1.11898.2.1.1.7
Type
scalar
Access
readwrite
Status
current
Parent
orinocoSys
Siblings
21

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
orinocoSysInvMgmtnode-.1.3.6.1.4.1.11898.2.1.1.1
oriSystemMode
This object represents the mode the system is configured to operate in, either bridge or gateway/router mode.
scalarEnumeration.1.3.6.1.4.1.11898.2.1.1.10
oriSystemEventLogTable
This table contains system event log information that can include events, errors, and informational messages. This is a circular buffer with a limit 100 entries.
table-.1.3.6.1.4.1.11898.2.1.1.11
oriSystemEventLogTableReset
This object is used to reset/clear the event log table. When this object is the set all entries in the event log table are deleted/cleared.
scalarInteger32.1.3.6.1.4.1.11898.2.1.1.12
oriSystemEventLogMask
This object is used to control what events will be logged by the event log facility. It is a mask, each bit is used to enable/disable a corresponding set of log messages. …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11898.2.1.1.13
oriSystemAccessUserName
This object represents the system access user name for the supported management interfaces (Telnet and HTTP).
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.11898.2.1.1.14
oriSystemAccessPassword
This object represents the system access password for the supported management interfaces (Telnet and HTTP). This object should be treated as write-only and returned as asterisk…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.11898.2.1.1.15
oriSystemAccessLoginTimeout
This object represents the login timeout in seconds. The default value should be 60 seconds (1 minute).
scalarInteger32.1.3.6.1.4.1.11898.2.1.1.16
oriSystemAccessIdleTimeout
This object represents the inactivity or idle timeout in seconds. The default value should be 900 seconds (15 minutes).
scalarInteger32.1.3.6.1.4.1.11898.2.1.1.17
oriSystemEventLogNumberOfMessages
This object represents the number of messages currently stored in the event log table.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11898.2.1.1.18
orinocoSysFeaturenode-.1.3.6.1.4.1.11898.2.1.1.19
oriSystemAccessMaxSessions
This object controls the maximum number of simultaneous telnet, http, and serial managmenent sessions.
scalarInteger32.1.3.6.1.4.1.11898.2.1.1.20
orinocoSyslognode-.1.3.6.1.4.1.11898.2.1.1.21
oriSystemCountryCode
This attribute identifies the country in which the station is operating. The first two octets of this string is the two character country code as described in document ISO/IEC 3…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.11898.2.1.1.22
orinocoTempLognode-.1.3.6.1.4.1.11898.2.1.1.23
oriSystemHwType
This attribute identifies the type of TMP11 hardware i.e. Indoor or Outdoor.
scalarEnumeration.1.3.6.1.4.1.11898.2.1.1.24
oriSystemReboot
This object is used to reboot the device. The value assigned to this object is the number of seconds until the next reboot.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11898.2.1.1.4
oriSystemContactEmail
This object is used to identify the email address of the contact person for this managed device.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.11898.2.1.1.5
oriSystemContactPhoneNumber
This object is used to identify the phone number of the contact person for this managed device.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.11898.2.1.1.6
oriSystemFlashBackupInterval
This object is used for the backup time interval for flash memory to be udpated.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11898.2.1.1.8
oriSystemEmergencyResetToDefault
This object is used to reset the device to factory default values. When this variable is set to 1, all the objects shall be set to factory default values. The default value for …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11898.2.1.1.9