optixSdhLmspSwitchSta
OPTIX-SDH-LMSP-MIB ·
.1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.10
Object
column
Enumeration
This object indicates the LMSP switching status. 0: stop(0), 1: i, 4: s, 255: starting
Context
- MIB
- OPTIX-SDH-LMSP-MIB
- OID
.1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- optixSdhLmspgEntry
- Table
- optixSdhLmspgTable
- Siblings
- 105
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | stop |
1 | i |
4 | s |
255 | starting |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| optixSdhLmspgid This object indicates the LMSP group ID. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.1 |
| optixSdhLmspBid14 This object indicates the slot ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.100 |
| optixSdhLmspSubid14 This object indicates the subboard ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.101 |
| optixSdhLmspPortid14 This object indicates the port number of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.102 |
| optixSdhLmspAu4Map14 This object indicates the LMSP group Au4 mapping. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.103 |
| optixSdhLmspReqSite14 This object indicates the LMSP remote/local end. 1: near, 2: far | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.104 |
| optixSdhLmspStartFlag This object indicates the start flag of the LMSP group. 0: protocolStop, 1: protocolStart | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.105 |
| optixSdhLmspHoldOffTime This object indicates the LMSP switching delay time. Value range: 0 to 100 (unit: 100 ms). If there is no delay time, the returned value is 0. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.11 |
| optixSdhLmspK2Mode This object indicates the last three bits of the K2 byte of the LMSP group, which represents the single-/dual-ended mode. 0: noindicate, 1: indicate | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.12 |
| optixSdhLmspKLevel This object indicates the priority level of the SF and SD in the K byte. 0: kHigh, 1: kLow | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.13 |
| optixSdhLmspProtocolType This object indicates the protocol type of the LMSP group. 0: old, 1: new, 2: restruct, 3: transoceanic | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.14 |
| optixSdhLmspuid0 This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.15 |
| optixSdhLmspBid0 This object indicates the slot ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.16 |
| optixSdhLmspSubid0 This object indicates the subboard ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.17 |
| optixSdhLmspPortid0 This object indicates the port number of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.18 |
| optixSdhLmspAu4Map0 This object indicates the LMSP group Au4 mapping. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.19 |
| optixSdhLmspProtectType This object indicates the LMSP protection type. 0: 1+1 protection, 1: 1:N protection | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.2 |
| optixSdhLmspReqSite0 This object indicates the LMSP remote/local end. 1: near, 2: far | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.20 |
| optixSdhLmspuid1 This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.21 |
| optixSdhLmspBid1 This object indicates the slot ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.22 |
| optixSdhLmspSubid1 This object indicates the subboard ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.23 |
| optixSdhLmspPortid1 This object indicates the port number of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.24 |
| optixSdhLmspAu4Map1 This object indicates the LMSP group Au4 mapping. The value is determined by the line board. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.25 |
| optixSdhLmspgRowStatus This object indicates the row status of the LMSP group. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.255 |
| optixSdhLmspReqSite1 This object indicates the LMSP remote/local end. 1: near, 2: far | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.26 |
| optixSdhLmspuid2 This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.27 |
| optixSdhLmspBid2 This object indicates the slot ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.28 |
| optixSdhLmspSubid2 This object indicates the subboard ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.29 |
| optixSdhLmspWorkChnNum This object indicates the number of LMSP working channels. Value range: 1 to 14. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.3 |
| optixSdhLmspPortid2 This object indicates the port number of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.30 |
| optixSdhLmspAu4Map2 This object indicates the LMSP group Au4 mapping. The value is determined by the line board | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.31 |
| optixSdhLmspReqSite2 This object indicates the LMSP remote/local end. 1: near, 2: far | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.32 |
| optixSdhLmspuid3 This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.33 |
| optixSdhLmspBid3 This object indicates the slot ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.34 |
| optixSdhLmspSubid3 This object indicates the subboard ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.35 |
| optixSdhLmspPortid3 This object indicates the port number of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.36 |
| optixSdhLmspAu4Map3 This object indicates the LMSP group Au4 mapping. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.37 |
| optixSdhLmspReqSite3 This object indicates the LMSP remote/local end. 1: near, 2: far | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.38 |
| optixSdhLmspuid4 This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.39 |
| optixSdhLmspRevertMode This object indicates the LMSP revertive mode. 0: non-revertive, 1: revertive | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.4 |
| optixSdhLmspBid4 This object indicates the slot ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.40 |
| optixSdhLmspSubid4 This object indicates the subboard ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.41 |
| optixSdhLmspPortid4 This object indicates the port number of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.42 |
| optixSdhLmspAu4Map4 This object indicates the LMSP group Au4 mapping. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.43 |
| optixSdhLmspReqSite4 This object indicates the LMSP remote/local end. 1: near, 2: far | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.44 |
| optixSdhLmspuid5 This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.45 |
| optixSdhLmspBid5 This object indicates the slot ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.46 |
| optixSdhLmspSubid5 This object indicates the subboard ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.47 |
| optixSdhLmspPortid5 This object indicates the port number of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.48 |
| optixSdhLmspAu4Map5 This object indicates the LMSP group Au4 mapping. The value is determined by the line board. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.49 |
| optixSdhLmspOpMode This object indicates the single-/dual-ended flag of the LMSP group. 0: single-ended, 1: dual-ended | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.5 |
| optixSdhLmspReqSite5 This object indicates the LMSP remote/local end. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.50 |
| optixSdhLmspuid6 This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.51 |
| optixSdhLmspBid6 This object indicates the slot ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.52 |
| optixSdhLmspSubid6 This object indicates the subboard ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.53 |
| optixSdhLmspPortid6 This object indicates the port number of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.54 |
| optixSdhLmspAu4Map6 This object indicates the LMSP group Au4 mapping. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.55 |
| optixSdhLmspReqSite6 This object indicates the LMSP remote/local end. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.56 |
| optixSdhLmspuid7 This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.57 |
| optixSdhLmspBid7 This object indicates the slot ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.58 |
| optixSdhLmspSubid7 This object indicates the subboard ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.59 |
| optixSdhLmspActiveFlag This object indicates the LMSP activation flag. 0x01: to be added, 0x02: to be deleted, 0x03: activiated | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.6 |
| optixSdhLmspPortid7 This object indicates the port number of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.60 |
| optixSdhLmspAu4Map7 This object indicates the LMSP group Au4 mapping. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.61 |
| optixSdhLmspReqSite7 This object indicates the LMSP remote/local end. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.62 |
| optixSdhLmspuid8 This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.63 |
| optixSdhLmspBid8 This object indicates the slot ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.64 |
| optixSdhLmspSubid8 This object indicates the subboard ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.65 |
| optixSdhLmspPortid8 This object indicates the port number of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.66 |
| optixSdhLmspAu4Map8 This object indicates the LMSP group Au4 mapping. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.67 |
| optixSdhLmspReqSite8 This object indicates the LMSP remote/local end. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.68 |
| optixSdhLmspuid9 This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.69 |
| optixSdhLmspWtrTime This object indicates the WTR time of the LMSP group. Value range: 6 to 720 (unit: s). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.7 |
| optixSdhLmspBid9 This object indicates the slot ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.70 |
| optixSdhLmspSubid9 This object indicates the subboard ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.71 |
| optixSdhLmspPortid9 This object indicates the port number of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.72 |
| optixSdhLmspAu4Map9 This object indicates the LMSP group Au4 mapping. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.73 |
| optixSdhLmspReqSite9 This object indicates the LMSP remote/local end. 1: near, 2: far | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.74 |
| optixSdhLmspuid10 This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.75 |
| optixSdhLmspBid10 This object indicates the slot ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.76 |
| optixSdhLmspSubid10 This object indicates the subboard ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.77 |
| optixSdhLmspPortid10 This object indicates the port number of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.78 |
| optixSdhLmspAu4Map10 This object indicates the LMSP group Au4 mapping. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.79 |
| optixSdhLmspSdEnable This object indicates the enable status of the LMSP SD switching. 0: disable, 1: enable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.8 |
| optixSdhLmspReqSite10 This object indicates the LMSP remote/local end. 1: near, 2: far | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.80 |
| optixSdhLmspuid11 This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.81 |
| optixSdhLmspBid11 This object indicates the slot ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.82 |
| optixSdhLmspSubid11 This object indicates the subboard ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.83 |
| optixSdhLmspPortid11 This object indicates the port number of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.84 |
| optixSdhLmspAu4Map11 This object indicates the LMSP group Au4 mapping. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.85 |
| optixSdhLmspReqSite11 This object indicates the LMSP remote/local end. 1: near, 2: far | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.86 |
| optixSdhLmspuid12 This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.87 |
| optixSdhLmspBid12 This object indicates the slot ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.88 |
| optixSdhLmspSubid12 This object indicates the subboard ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.89 |
| optixSdhLmspSwitchReq This object indicates the LMSP switching request. 0: lpsNr, 16: lpsDnr, 64: lpsExer, 96: lpsWtr, 128: lpsMs, 160: lpsSdLow, 176: lpsSd, 192: lpsSfLow, 208: lpsSf, 224: lpsFs, 240:… | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.9 |
| optixSdhLmspPortid12 This object indicates the port number of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.90 |
| optixSdhLmspAu4Map12 This object indicates the LMSP group Au4 mapping. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.91 |
| optixSdhLmspReqSite12 This object indicates the LMSP remote/local end. 1: near, 2: far | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.92 |
| optixSdhLmspuid13 This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.93 |
| optixSdhLmspBid13 This object indicates the slot ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.94 |
| optixSdhLmspSubid13 This object indicates the subboard ID of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.95 |
| optixSdhLmspPortid13 This object indicates the port number of the LMSP group. The value is determined by the line board. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.96 |
| optixSdhLmspAu4Map13 This object indicates the LMSP group Au4 mapping. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.97 |
| optixSdhLmspReqSite13 This object indicates the LMSP remote/local end. 1: near, 2: far | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.98 |
| optixSdhLmspuid14 This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.99 |