optixPktPtpGrandMasterGrandmasterID2
OPTIX-PKT-PTPCLOCK-MIB ·
.1.3.6.1.4.1.2011.2.25.4.50.13.1.18
Object
scalar
SNMPv2-SMIUnsigned32
this parameter describes the main clocks high randmaster ID2. Clock source ID generation rule The first three bytes are the OUI code. The following four bytes are the NE ID. The last byte is 0x10. For example, if the OUI code is 0X001E10 and the NE ID is 10.1.1.1, the clock source ID is 0X001E100A01010110.
Context
- MIB
- OPTIX-PKT-PTPCLOCK-MIB
- OID
.1.3.6.1.4.1.2011.2.25.4.50.13.1.18- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- optixPktPtpClockGroup
- Siblings
- 26
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| optixPktPtpStaticBMCState this parameter describes static BMCs enabled status. 0 disable, 1 enable | scalar | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.1 |
| optixPktPtpSrcTimeHour this parameter describes the PTPs system hour. Value range 0 to 59. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.10 |
| optixPktPtpSrcTimeMinute this parameter describes the PTPs system minute. Value range 0 to 59. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.11 |
| optixPktPtpSrcTimeSecond this parameter describes the PTPs system second. Value range 0 to 64. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.12 |
| optixPktPtpSlaveOnlyMode this parameter describes the NEs mode of SLAVEONLY. 1 slaveOnly, 2 nonSlaveOnly | scalar | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.13 |
| optixPktPtpGrandMasterBid this parameter describes the main clocks board ID that being tailed. Value range 1 to all Fs. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.14 |
| optixPktPtpGrandMasterSbid this parameter describes the main clocks subcard ID that being tailed. Value range 1 to all Fs. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.15 |
| optixPktPtpGrandMasterPid this parameter describes the main clocks port ID that being tailed. Value range 1 to all Fs. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.16 |
| optixPktPtpGrandMasterGrandmasterID1 this parameter describes the main clocks low randmaster ID1. Clock source ID generation rule The first three bytes are the OUI code. The following four bytes are the NE ID. The la… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.17 |
| optixPktPtpWTR this parameter describes the time of 1588 WTR. Value range 0 to 12 (unit minute). The default value is 5 and the step length is 1. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.19 |
| optixPktPtpMode This parameter describes the PTP working mode of an NE. 1: oc; 2: bc; 3: tc; 5: tcBc; 6: tbc | scalar | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.2 |
| optixPktPtpTimeEnableState this parameter describes the NEs time adjusting enable state. 0 close, 1 open | scalar | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.20 |
| optixPktPtpInfoMode This parameter describes the NE PTP message multicast mode. 1 multicast, 2 partlyMulticast | scalar | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.21 |
| optixPktPtpClockTable this table describes the configuration message of 1588 clock mode | table | - | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22 |
| optixPktSTGPtpSrcChangeEventMember | node | - | .1.3.6.1.4.1.2011.2.25.4.50.13.1.23 |
| optixPktSTGPtpSrcChangeEvent | node | - | .1.3.6.1.4.1.2011.2.25.4.50.13.1.24 |
| optixPktPtpClockPLTable This table describes the configurations of the TC+OC port reference source priority list. | table | - | .1.3.6.1.4.1.2011.2.25.4.50.13.1.25 |
| optixPktSTGPtpPdvOverTHResEvent | node | - | .1.3.6.1.4.1.2011.2.25.4.50.13.1.26 |
| optixPktClockSrvInfoTable This table describes the configurations of clock services. | table | - | .1.3.6.1.4.1.2011.2.25.4.50.13.1.27 |
| optixPktPtpDomain this parameter describes the PTP Domain of NE. Value range 0 to 255. The default value is 0. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.3 |
| optixPktPtpTimeSrcIdHigh this parameter describes the PTPs source IDs high part. Clock source ID generation rule The first three bytes are the OUI code. The following four bytes are the NE ID. The last by… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.4 |
| optixPktPtpTimeSrcIdLow this parameter describes the PTPs source IDs low part. Clock source ID generation rule The first three bytes are the OUI code. The following four bytes are the NE ID. The last byt… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.5 |
| optixPktPtpSrcMode This parameter describes the mode of selecting system frequency sources. 1 Physical clock, 2 PTP, 3 PTP ACR UNI | scalar | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.6 |
| optixPktPtpSrcTimeYear this parameter describes the PTPs system year. Value range 2000 to 2099. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.7 |
| optixPktPtpSrcTimeMonth this parameter describes the PTPs system month. Value range 1 to 12. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.8 |
| optixPktPtpSrcTimeDay this parameter describes the PTPs system day. Value range 1 to 31. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.9 |