optixEthPortTag
OPTIX-PKT-PORT-MIB ·
.1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.21
Object
column
r/w
Enumeration
This parameter specifies the eth port tag. 0: access, 1: tagAware, 2: hybrid, 255: snmp0xff
Context
- MIB
- OPTIX-PKT-PORT-MIB
- OID
.1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- optixEthPortEntry
- Table
- optixEthPortTable
- Siblings
- 50
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | access |
1 | tagAware |
2 | hybrid |
255 | snmp0xff |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| optixEthPortId This parameter specifies the eth port index | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.1 |
| optixEthPortFcMode This parameter specifies the eth port fc mode. 0: disable, 1: enable, 2: send, 3: recv | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.10 |
| optixEthPortAutoFcMode This parameter specifies the eth port fc mode auto. 0: disable, 1: asym, 2: sym, 3: asymSym | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.11 |
| optixEthPortOpif This parameter specifies the eth port opif type. 0: none, 1: singleMode, 2: multiMode, 3: electrical | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.12 |
| optixEthPortSamplingId This parameter specifies the eth port receive rate | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.13 |
| optixEthPortRxRate This parameter specifies the eth port receive rate | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.14 |
| optixEthPortTxRate This parameter specifies the eth port send rate | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.15 |
| optixEthPortRealFc This parameter specifies the eth port real fc mode result. 0: disable, 1: enable, 2: send, 3: recv | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.16 |
| optixEthPortMdimode This parameter specifies the eth port mdi mode. 0: mdix, 1: auto, 2: mdi | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.17 |
| optixEthPortEnable This parameter specifies the eth port enable. 0: disable, 1: enable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.18 |
| optixEthPortVlanId This parameter specifies the eth port vlan ID. Value range: 0 to 4095. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.19 |
| optixEthPortEncapType This parameter specifies the eth port encaptype. 0: null, 1: cTag, 2: sTag, 3: iTag, 4: atm, 5: ppp | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.2 |
| optixEthPortVlanPri This parameter specifies the eth port vlan pri. Value range: 0 to 7. A larger value indicates a higher priority. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.20 |
| optixEthPortQinqId This parameter specifies the eth port qinq | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.22 |
| optixEthPortMac This parameter specifies the eth port mac address | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.23 |
| optixEthPortLoopEn This parameter specifies the eth port loop enable. 0: disable, 1: enable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.24 |
| optixEthPortBlockEn This parameter specifies the eth port block after loop. 0: disable, 1: enable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.25 |
| optixEthPortRowStatus This parameter specifies the eth port row status | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.255 |
| optixEthPortWatchFlowEn This parameter specifies the eth port watch flow enable. 0: disable, 1: enable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.26 |
| optixEthPortWatchFlowTime This parameter specifies the eth port watch flow time | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.27 |
| optixEthPortBroadBateenEn This parameter specifies the eth port broadbateen enable. 0: disable, 1: enable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.28 |
| optixEthPortBroadBateen This parameter specifies the eth port broadbateen | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.29 |
| optixEthPortMtu This parameter specifies the eth port MTU. Value range: 1518 to 9600. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.3 |
| optixEthPortAutoneg This parameter specifies the eth port autoneg. 1: snmp10mhalf, 2: snmp10mfull, 3: snmp100mhalf, 4: snmp100mfull, 5: snmp1000mhalf, 6: snmp1000mfull, 255: null | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.30 |
| optixEthPortWatchRateEn This parameter specifies the eth port watch rate enable. 0: disable, 1: enable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.31 |
| optixEthPortOpticalDir This parameter specifies the eth port optical direction. 0: none, 1: sglfbr, 2: dblfbr | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.32 |
| optixEthPortJitterEnableState This parameter specifies the eth port enable status of jitter optimization. 0: disable, 1: enable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.33 |
| optixEthPortPhyErrDetectState This parameter specifies the eth port enable status of PHY erroneous detection. 0: disable, 1: enable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.34 |
| optixEthPortErrorFlag This parameter specifies the eth port flag of PHY mistake | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.35 |
| optixEthPortLevelMode This parameter specifies the eth port mode. 1: level1, 2: level2, 3: level3, 4: level2Level3 | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.36 |
| optixEthPortUpDownStauts This parameter specifies the up down status of port. 0: down, 1: up | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.37 |
| optixHybridMinBandWidth This parameter specifies hybrid port min bandwidth | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.38 |
| optixHybridMaxBandWidth This parameter specifies hybrid port max bandwidth | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.39 |
| optixEthPortWorkMode This parameter specifies the eth port work mode. 0: auto, 1: snmp10mhalf, 2: snmp10mfull, 3: snmp100mhalf, 4: snmp100mfull, 5: snmp1000mhalf, 6: snmp1000mfull, 7: snmp10gfulllan, … | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.4 |
| optixEthPortPoeEnable This parameter specifies the eth port enable status of poe. 0: disable, 1: enable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.40 |
| optixEthPortRealPoeEnable This parameter specifies the eth port real enable status of poe | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.41 |
| optixHybridL3HoldOffTime This parameter specifies hybrid port Hold off time | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.42 |
| optixEthPortBerDetectState This parameter indicates whether the bit error detection function is enabled. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.43 |
| optixEthPortPacketLostEXC This parameter specifies the threshold of PacketLostEXC. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.44 |
| optixEthPortPacketLostSD This parameter specifies the threshold of PacketLostSD. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.45 |
| optixEthPortBerSwitchState This parameter indicates whether the bit-error-triggered switching is enabled. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.46 |
| optixEthPortBerSwitchType This parameter indicates the type of the bit-error-triggered switching. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.47 |
| optixEthPortbdbateabsth This object indicates the threshold of the broadcast packet suppression absolute value. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.48 |
| optixEthPortBwuSwatChenableState This object indicates the enable status of monitoring port historical bandwidth usage. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.49 |
| optixEthPortEn This parameter specifies the eth port phy enable. 0: disable, 1: enable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.5 |
| optixEthPortPoeMode This parameter specifies the PoE mode of the Ethernet port. 0: PoE; 1: PoE plus | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.50 |
| optixEthPortPtnWorkMode This parameter specifies the eth port phy work mode. 0: auto, 1: snmp10mhalf, 2: snmp10mfull, 3: snmp100mhalf, 4: snmp100mfull, 5: snmp1000mhalf, 6: snmp1000mfull, 7: snmp10gfulll… | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.6 |
| optixEthPortPhyFCState This parameter specifies the eth port phy flow control state. 0: disable, 1: enable, 2: send, 3: recv | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.7 |
| optixEthPortPtnMacLoop This parameter specifies the eth port mac loop type. 0: noloop, 1: inloop, 2: outloop | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.8 |
| optixEthPortPtnPhyLoop This parameter specifies the eth port phy loop type. 0: noloop, 1: inloop, 2: outloop | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.9 |