optixERPSSWCMode
OPTIX-PKT-ERPS-MIB ·
.1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.31
Object
column
r/w
Enumeration
This object indicates the external switch mode of the ERPS,but the getting operator is invalid,assigning it 255. 0: clear, 1: mseast, 2: mswest, 3: fseast, 4: fswest, 255: invalide
Context
- MIB
- OPTIX-PKT-ERPS-MIB
- OID
.1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.31- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- optixERPSEntry
- Table
- optixERPSTable
- Siblings
- 46
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | clear |
1 | mseast |
2 | mswest |
3 | fseast |
4 | fswest |
255 | invalid |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| optixERPSId This object indicates the ERPS protocol instance ID. Value range: 1 to 8. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.1 |
| optixERPSRplPort This object indicates the port number of the ERPS RPL port. Value range: 1 to MAX_ETH_PORT. If there is no RPL port, the value is 0xffff. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.10 |
| optixERPSRplownerFlag This object indicates whether a node is an RPL owner ring node. 0: none, 1: rplport, 2: rplneigh, 3: rplnextneigh | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.11 |
| optixERPSCtrlVlan This object indicates the ERPS control VLAN. Value range: 1 to 4094. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.12 |
| optixERPSDmac This object indicates the ERPS DMAC. Value range: 01-19-A7-00-00-00 to 01-19-A7-00- 00 -FF. The current version uses a fixed value of 01-19-A7-00-00-01. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.13 |
| optixERPSNodeId This object indicates the current node ID of the ERPS. Value range: 01-19-A7-00-00-00 to 01-19-A7-00- 00 -FF. The current version uses a fixed value of 01-19-A7-00-00-01. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.14 |
| optixERPSHoldoffTime This object indicates the ERPS delay time. Value range: 0 to 10000 (unit: ms). The default value is 0 and the step length is 100. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.15 |
| optixERPSWtrTime This object indicates the ERPSWTR time. Value range: 1 to 12 (unit: minute). The default value is 5 and the step length is 1. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.16 |
| optixERPSGuardTime This object indicates the ERPS guard time. Value range: 10 to 2000 (unit: ms). The default value is 500 and the step length is 10. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.17 |
| optixERPSMel This object indicates the ERPS MEL. Value range: 0 to 7. The default value is 4. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.18 |
| optixERPSInterval This object indicates the ERPS packet transmitting interval. Value range: 1 to 10 (unit: s). The default value is 5 and the step length is 1. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.19 |
| optixERPSEastBoardId This object indicates the east slot ID of the ERPS. If there is no east port, the slot ID is 0xffff. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.2 |
| optixERPSLastRequest This object indicates the last ERPS switching request. 1: rapsNr, 2: rapsNrRb, 3: wtrRunning, 4: wtrExpires, 5: rapsSf, 6: localSf, 7: localClrSf, 8: initRequest, 9: clear, 10: fs… | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.20 |
| optixERPSRbState This object indicates the RB status of the ERPS. 0: no RB, 1: RB | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.21 |
| optixERPSDnfState This object indicates whether the remote request of the ERPS is in DNF state. 0: no DNF, 1: DNF | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.22 |
| optixERPSReceiveNodeId This object indicates the source node ID of the ERPS switching request, which is an MAC address. Value range: 01-19-A7-00-00-00 to 01-19-A7-00- 00 -FF. The current version uses a … | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.23 |
| optixERPSFsmState This object indicates the state machine status of the current node of the ERPS. 0: idle, 1: protection, 2: forceswitch, 3: manualswitch, 4: pending | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.24 |
| optixERPSEastPortState This object indicates the current status of the east port of the ERPS. 0: block, 1: unblock | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.25 |
| optixERPSRowStatus This object indicates the row status of the ERPS. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.255 |
| optixERPSWestPortState This object indicates the current status of the west port of the ERPS. 0: block, 1: unblock | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.26 |
| optixERPSvchannelState This object indicates the enable status of the virtual channel of the ERPS. 0: disable, 1: enable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.27 |
| optixERPSmajorID This object indicates the master ring network ID of the ERPS. Value range: 1 to 8. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.28 |
| optixERPSVerId This object indicates the version of the ERPS. 1: ver1, 2: ver2 | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.29 |
| optixERPSEastSubboardId This object indicates the east subboard ID of the ERPS. If there is no subboard, the value is 0xFF. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.3 |
| optixERPSRvtMode This object indicates revert mode of the ERPS. 0: norvt, 1: rvt | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.30 |
| optixERPSVchannelIdNum This object indicates the number of the VLAN ID of the ERPS. Value range: 0 to 255. The value 0 indicates that all VLANs are deleted. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.32 |
| optixERPSVchannelIdList This object indicates the VLAN List of the ERPS. Value range: 1 to 4094. & is used to separate multiple VLANs. For example, 1 & 2 & 3 | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.33 |
| optixERPSEastSendMSGNum This object indicates the number of East send message of the ERPS. Value range: 0 to 0xffffffff. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.34 |
| optixERPSWestSendMSGNum This object indicates the number of West send message of the ERPS. Value range: 0 to 0xffffffff. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.35 |
| optixERPSEastReceiveMSGNum This object indicates the number of East receive message of the ERPS. Value range: 0 to 0xffffffff. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.36 |
| optixERPSWestReceiveMSGNum This object indicates the number of West receive message of the ERPS. Value range: 0 to 0xffffffff. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.37 |
| optixERPSEastReceiveErrMSGNum This object indicates the number of East send error message of the ERPS. Value range: 0 to 0xffffffff. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.38 |
| optixERPSWestReceiveErrMSGNum This object indicates the number of West send error message of the ERPS. Value range: 0 to 0xffffffff. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.39 |
| optixERPSEastPort This object indicates the east port number of the ERPS. Value range: 1 to MAX_ETH_PORT. If there is no east port, the value is 0xffff. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.4 |
| optixERPSCLrMSGStatic This object indicates clearing the message of the ERPS,but the getting operator is invalid,assigning it 255. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.40 |
| optixERPSDebugWtrTime This object indicates debugging the waiting for resuming time of the ERPS. Value range: 1 to 65535 (unit: s). The default value is 300. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.41 |
| optixERPSEthType This object indicates the ETH type of the ERPS. 0x8809: transmission mode, 0x8902: standard mode | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.42 |
| optixERPSLoopDetect This object indicates the state of loop detect of the ERPS. 0: disable, 1: enable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.43 |
| optixERPSRingRole This object indicates the ring role of the ERPS. 255: unknown, 1: major,2:sub | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.44 |
| optixERPSInternode This parameter indicates the interconnection attribute of current node ID of ERPS . | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.45 |
| optixERPSMultifailure This parameter indicates the multifailure attribute of current node ID of ERPS . | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.46 |
| optixERPSWestBoardId This object indicates the west slot ID of the ERPS. If there is no west port, the slot ID is 0xffff. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.5 |
| optixERPSWestSubboardId This object indicates the westsubboard ID of the ERPS. If there is no subboard, the value is 0xFF. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.6 |
| optixERPSWestPort This object indicates the west port number of the ERPS. Value range: 1 to MAX_ETH_PORT. If there is no west port, the value is 0xffff. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.7 |
| optixERPSRplBoardId This object indicates the slot ID of the ERPSRPL port. If there is no RPL port, the slot ID is 0xffff. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.8 |
| optixERPSRplSubboardId This object indicates the subboard ID of the ERPS RPL port. If there is no subboard, the value is 0xFF. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.26.1.1.1.9 |