optixPWTpOamMepTSTState
OPTIX-MPLSTP-OAM-MIB ·
.1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.23
Object
column
r/w
Enumeration
This parameter indicates the sending status of TST packets.
Context
- MIB
- OPTIX-MPLSTP-OAM-MIB
- OID
.1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- optixPWTpOamMepEntry
- Table
- optixPWTpOamMepTable
- Siblings
- 35
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | stop |
1 | testing |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| optixPWTpOamMepIndex This object indicates thePW OAM MEP index, ranging from 1 to 0x00ffffff. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.1 |
| optixPWTpOamMepCcSend This object indicates the CC start/stop status. 0: stop 1: start | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.10 |
| optixPWTpOamMepSf This object indicates the SF threshold (packet loss rate). Valid values range from 0 to 100. | column | Unsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.11 |
| optixPWTpOamMepSd This object indicates the SD threshold (packet loss rate). Valid values range from 0 to 100. | column | Unsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.12 |
| optixPWTpOamMepMegInfo This object indicates the MEG ID, which is a character string. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.13 |
| optixPWTpOamMepLckEnable This object indicates the locking status. 1: enable 0: disable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.14 |
| optixPWTpOamMepLckTime This object indicates the LCK packet period. 1: 3.3 ms 2: 10 ms 3: 100 ms 4: 1000 ms (1s) 5: 10000 ms (10s) 6: 60000 ms (1 minute) 7: 600000 ms (10 minutes) | column | Unsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.15 |
| optixPWTpOamMepLckPri This object indicates the LCK packet priority. Valid values range from 0 to 7. 0xff indicates that the priority is synchronized with the CC packet priority. | column | Unsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.16 |
| optixPWTpOamMepLmMode This object indicates the LM packet mode. 0: standard 1: huawei | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.17 |
| optixPWTpOamMepPeerLsrId This object indicates the LSR IDto receive, which is the LSR ID of the valid MPLS device. 0.0.0.0: indicates that the peer IP address ofthe local PW is automatically obtained. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.18 |
| optixPWTpOamMepPeerPwId This object indicates the remote PW ID, which is a valid MPLS PW ID. 0: indicates that the ID of the local PW is automatically obtained. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.19 |
| optixPWTpOamMepEnable This object indicates whether the OAM is enabled. 1: enable 0: disable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.2 |
| optixPWTpOamMepGalEnable This object indicates the enable status of the GAL label. 1: enable 0: disable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.20 |
| optixPWTpOamMepStandard This object indicates the OAM protocol standard  1: 1711 2: 1731 | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.21 |
| optixPWTpOamMepGalMode This parameter indicates the GAL label mode. 0: RFC5586 (13 label) 1: Y.1711 (14 label) | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.22 |
| optixPWTpOamMepRCVPKTNum This parameter indicates the total number of received TST packets. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.24 |
| optixPWTpOamMepSendPKTNum This parameter indicates the total number of sent TST packets. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.25 |
| optixPWTpOamMepMISCRCNum This parameter indicates the number of received CRC error TST packets. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.26 |
| optixPWTpOamMepMISCodeNum This parameter indicates the number of received TST packets with error codes. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.27 |
| optixPWTpOamMepMISOrderNum This parameter indicates the number of received TST packets with error orders. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.28 |
| optixPWTpOamMepClrTSTDir This parameter indicates the direction in which the TST packet statistical results are deleted. 0: send&receive 1: receive 2: send | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.29 |
| optixPWTpOamMepLevel This object indicates the MEG level. Default: 7. Valid values range from 0 to 7. | column | Unsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.3 |
| optixPWTpOamMepPKTLength This parameter indicates the length of a TST testing packet. The unit is byte. The value 0xffff indicates the setting the length is invalid. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.30 |
| optixPWTpOamMepTimeSpace This parameter indicates the TST testing interval. | column | Unsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.31 |
| optixPWTpOamMepPrio This parameter indicates the priority of the TST testing. | column | Unsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.32 |
| optixPWTpOamMepTranskind This parameter indicates the kind of transfer code. 0:null 1:nullCrc32 2:prbs 3:prbsCrc32 | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.33 |
| optixPWTpOamMepIsOffOper This parameter indicates whether TST interrupts services. 0:undisrupt 1:disrupt. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.34 |
| optixPWTpOamMepTSTRecvEn This parameter indicates the receive enable status of TST packets. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.35 |
| optixPWTpOamMepprotocolformat This object indicates the format of the potocol.1:standard,2:huawei | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.36 |
| optixPWTpOamMepMegType This object indicates the identifier type. 1: ip-based 2: icc-based 3: customer-based | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.4 |
| optixPWTpOamMepId This object indicates the MEP ID. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.5 |
| optixPWTpOamMepPeerId This object indicates the remote MEP ID. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.6 |
| optixPWTpOamMepCheckWay This object indicates the OAM detection mode. 1: auto 2: manual | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.7 |
| optixPWTpOamMepCcTime This object indicates the CC packet period. 1: 3.33 ms 2: 10 ms 3: 100 ms 4: 1s (default) 5: 10s 6: 1 minute 7: 10 minutes | column | Unsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.8 |
| optixPWTpOamMepCcPri This object indicates the CC priority. Valid values rang from 0 to 7. 0xff: invalid | column | Unsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.9 |