optixPWPingTrcRtStop
OPTIX-MPLSTP-OAM-MIB ·
.1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.16
Object
column
r/w
Enumeration
This object indicates to stop PW PING and PW TRACEROUTE.
Context
- MIB
- OPTIX-MPLSTP-OAM-MIB
- OID
.1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- optixPWPingTrcRtEntry
- Table
- optixPWPingTrcRtTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | stop |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| optixPWPingTrcRtIndex This object indicates the PW PING or PW TRACEOUTE index ranging from 1 to 0x00ffffff. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.1 |
| optixPWPingTimeOut This object indicates the timeout period. Valid values range from 50 to 6000 with the unit of 10 ms. The default value is 300 (that is 3s). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.10 |
| optixPWTrcRtExp This object indicates the EXP value for the transmitted packets. Valid values range from 0 to 7. The default value is 7. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.11 |
| optixPWTrcRtTTL This object indicates the TTL value for the transmitted packets (the value indicates the number of attempt hops). Valid values range from 1 to 255. The default value is 255. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.12 |
| optixPWTrcRtReplymode This object indicates the Reply mode. The default value is 2. Valid values are as follows: 1:no response 2: IPv4 UDP response 4: application control channel | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.13 |
| optixPWTrcRtPktlen This object indicates the length of a transmitted packet. The default value is 84. Valid values range from 84 to 1400. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.14 |
| optixPWTrcRtTimeOut This object indicates the timeout period. Valid values range from 50 to 6000 with the unit of 10 ms. The default value is 300 (that is 3s). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.15 |
| optixPWPingPeerIP This object indicates the IP address of the peer end that initiates PW PING. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.2 |
| optixPWPingPeerPwID This object indicates the PW ID of the peer end that initiates PW PING. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.3 |
| optixPWPingReqNum This object indicates the number of Echo Request packets initiating PW PING. Valid values range from 0 to 0xffffffff. The default value is 3. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.4 |
| optixPWPingExp This object indicates the EXP value for the transmitted packets. Valid values range from 0 to 7. The default value is 7. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.5 |
| optixPWPingTTL This object indicates the TTL value for the transmitted packets (the value indicates the number of attempt hops). Valid values range from 1 to 255. The default value is 255. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.6 |
| optixPWPingSendint This object indicates the interval at which packets are transmitted. Valid values range from 10 to 1000 with the unit of 10 ms. The default value is 100 (that is 1s). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.7 |
| optixPWPingReplymode This object indicates the Reply mode. The default value is 2. Valid values are as follows: 1:no response 2: IPv4 UDP response 4: application control channel | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.8 |
| optixPWPingPktlen This object indicates the length of a transmitted packet. The default value is 84. Valid values range from 84 to 1400. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.9 |