optixPWPingExtBitMode

OPTIX-MPLSTP-OAM-MIB · .1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.11
MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32 
This object indicates the check mode, 0:not check bit mode,1:all 0 mode,2:all f mode.

Context

MIB
OPTIX-MPLSTP-OAM-MIB
OID
.1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.11
Type
column
Access
readwrite
Status
current
Parent
optixPWPingExtTrcRtEntry
Table
optixPWPingExtTrcRtTable
Siblings
10

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
optixPWPingExtTrcRtIndex
This object indicates the PW PING or PW TRACEOUTE index ranging from 1 to 0x00ffffff.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.1
optixPWPingExtTimeOut
This object indicates the timeout period. Valid values range from 50 to 6000 with the unit of 10 ms. The default value is 300 (that is 3s).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.10
optixPWPingExtPeerIP
This object indicates the PW ID of the peer end that initiates PW PING.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.2
optixPWPingExtPeerPwID
This object indicates the PW ID of the peer end that initiates PW PING.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.3
optixPWPingExtReqNum
This object indicates the number of Echo Request packets initiating PW PING. Valid values range from 0 to 0xffffffff. The default value is 3.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.4
optixPWPingExtExp
This object indicates the EXP value for the transmitted packets. Valid values range from 0 to 7. The default value is 7.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.5
optixPWPingExtTTL
This object indicates the TTL value for the transmitted packets (the value indicates the number of attempt hops). Valid values range from 1 to 255. The default value is 255.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.6
optixPWPingExtSendint
This object indicates the interval at which packets are transmitted. Valid values range from 10 to 1000 with the unit of 10 ms. The default value is 100 (that is 1s).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.7
optixPWPingExtReplymode
This object indicates the Reply mode. The default value is 2. Valid values are as follows: 1:no response 2: IPv4 UDP response 4: application control channel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.8
optixPWPingExtPktlen
This object indicates the length of a transmitted packet. The default value is 84. Valid values range from 84 to 1400.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.9