optixL2LptPropertyAcDefect

OPTIX-L2-LPT-MIB · .1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.8
MIB view Table view

Object

column SNMPv2-SMIUnsigned32 
This object indicates the local user-side fault of the L2 LPT. 0: indicates that there is no fault. 1: indicates that there are faults.

Context

MIB
OPTIX-L2-LPT-MIB
OID
.1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.8
Type
column
Access
readonly
Status
current
Parent
optixL2LptPropertyEntry
Table
optixL2LptPropertyTable
Siblings
9

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
optixL2LptPropertyEnable
This object indicates the enable status of the L2 LPT. 0: disable, 1: enable
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.1
optixL2LptPropertyRemoteDefect
This object indicates the remote LPT instance fault of the L2 LPT. 0: indicates that there is no fault. 1: indicates that there are faults.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.10
optixL2LptPropertyWtrTime
This object indicates the WTR time of the L2 LPT. Value range: 1 to 600 (unit: s). The default value is 1.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.2
optixL2LptPropertyDelayTime
This object indicates the delay time of the L2 LPT. Value range: 0 to 10000 (unit: ms). The default value is 1000 and the step length is 100.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.3
optixL2LptPropertySwitchMode
This object indicates the switching modeof the L2 LPT. 0: strict, 1: nostrict
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.4
optixL2LptPropertyOamType
This object indicates the OAM type of the L2 LPT. 0: IptOam, 1: pwOam
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.5
optixL2LptPropertyLptOamPeriod
This object indicates the OAM period of the L2 LPT. Value range: 10 to 100 (unit: ms). The default value is 10.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.6
optixL2LptPropertyState
This object indicates the protocol status of the L2 LPT. 0: normal, 1: useFault, 2: networkFault, 3: faultRecoverWait, 4: faultRecover, 5: init
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.7
optixL2LptPropertyNetDefect
This object indicates the local network-side fault of the L2 LPT. 0: indicates that there is no fault. 1: indicates that there are faults.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.9