optixCfmoamMepEthbnStatus

OPTIX-CFMOAM-MIB · .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.13
MIB view Table view

Object

column r/w Enumeration 
This parameter indicates whether IEEE 802.1ag-compliant MEP bandwidth notification is enabled. Its value is disable (0, default) or enable(1).

Context

MIB
OPTIX-CFMOAM-MIB
OID
.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.13
Type
column
Access
readwrite
Status
current
Parent
optixCfmoamMepEntry
Table
optixCfmoamMepTable
Siblings
18

Syntax

Enumeration

Values & Constraints

Enumerated Values
0disable
1enable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
optixCfmoamMepId
This object indicates the MEP ID of the 802.1ag protocol. Value range: 1 to 8191.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.1
optixCfmoamMepLmRmepId
Eline matching remote maintenance point. Value range: 1 to 8191.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.10
optixCfmoamMepLmRule
Eline LM matching rule
columnOctetString.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.11
optixCfmoamMepServeId
This object indicates the service index of the 802.1ag protocol. The index is numbered globally on an NE. Value range: 1 to 4294967294.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.12
optixCfmoamMepEthbnLevel
This parameter indicates the MD level of an IEEE 802.1ag-compliant bandwidth notification object. Its value range is 0-7.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.14
optixCfmoamMepPeriodType
This parameter indicates the period type for IEEE 802.1ag-compliant MEP bandwidth notification. Its value is period(1) or nonperiod(2).
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.15
optixCfmoamMepPeriod
This parameter indicates the period for IEEE 802.1ag-compliant MEP bandwidth notification. Its value is 1s (default value), 10s, or 60s.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.16
optixCfmoamMepHoldTime
This parameter indicates the IEEE 802.1ag-compliant MEP bandwidth hold time. Its value range is 0-10s. Its default value is 0s.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.17
optixCfmoamMepPaketLen
This parameter indicates the IEEE 802.1ag-compliant MEP bandwidth notification packet length. Its value range is 64-9600. Its default value is 64.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.18
optixCfmoamMepDirect
This object indicates the MEP direction of the 802.1ag protocol. 1: ingress, 2: egress
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.2
optixCfmoamMepRowStatus
This object indicates the MEP row status of the 802.1ag protocol.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.255
optixCfmoamMepLogicPortType
This object indicates the logical port type of the 802.1ag protocol. 1: V-UNI, 2: V-NNI
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.3
optixCfmoamMepLogicPortid
This object indicates the logical port number of the 802.1ag protocol. If the logical port type is V-NNI, the bearer type must be PHY port or QinQ link.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.4
optixCfmoamMepVlan
This object indicates the VLAN of the 802.1ag protocol. Value range: 1 to 4094. If services are carried by ports, this parameter must be set to 0xffff.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.5
optixCfmoamMepCcStatus
This object indicates the CC status of the 802.1ag protocol. 1: enable, 0: disable
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.6
optixCfmoamMepAisStatus
This object indicates the enable status of inserting ETH AIS for the 802.1ag protocol. 1: enable, 0: disable
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.7
optixCfmoamMepClientLevel
This object indicates the MD level of the AIS insertion object for the 802.1ag protocol. Value range: 0 to 7.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.8
optixCfmoamMepAisPrd
This object indicates the retransmission period of the ETH AIS packets forthe802.1ag protocol.1:second,2:minute
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.9