optIfODUkTtpTraceIdentifierTransmitted
OPT-IF-MIB ·
.1.3.6.1.2.1.10.133.1.8.2.1.1
Object
column
r/w
OptIfTxTI
The trace identifier transmitted. This object is applicable when optIfODUkDirectionality has the value source(2) or bidirectional(3). It must not be instantiated in rows where optIfODUkDirectionality has the value sink(1). If no value is ever set by a management entity for this object, system-specific default value will be used. Any implementation that instantiates this object must document the system-specific default value or how it is derived.
Context
- MIB
- OPT-IF-MIB
- OID
.1.3.6.1.2.1.10.133.1.8.2.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- optIfODUkTtpConfigEntry
- Table
- optIfODUkTtpConfigTable
- Siblings
- 8
Syntax
OptIfTxTI
- Source
- OptIfTxTI
- Base type
OctetString
Values & Constraints
Type Constraints
range: 64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| optIfODUkTtpDAPIExpected The DAPI expected by the receiver.
This object is only applicable to the sink function, i.e.,
only when optIfODUkDirectionality has the value sink(1)
or bidirectional(3). It must… | column | OptIfExDAPI | .1.3.6.1.2.1.10.133.1.8.2.1.2 |
| optIfODUkTtpSAPIExpected The SAPI expected by the receiver.
This object is only applicable to the sink function, i.e.,
only when optIfODUkDirectionality has the value sink(1)
or bidirectional(3). It must… | column | OptIfExSAPI | .1.3.6.1.2.1.10.133.1.8.2.1.3 |
| optIfODUkTtpTraceIdentifierAccepted The actual trace identifier accepted.
This object is only applicable to the sink function, i.e.,
only when optIfODUkDirectionality has the value sink(1)
or bidirectional(3). It m… | column | OptIfAcTI | .1.3.6.1.2.1.10.133.1.8.2.1.4 |
| optIfODUkTtpTIMDetMode Indicates the mode of the Trace Identifier Mismatch (TIM)
Detection function.
This object is only applicable to the sink function, i.e.,
only when optIfODUkDirectionality has the … | column | OptIfTIMDetMode | .1.3.6.1.2.1.10.133.1.8.2.1.5 |
| optIfODUkTtpTIMActEnabled Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
This object is only applicable to the sink function, i.e.,
only when optIfODUkDirectio… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.133.1.8.2.1.6 |
| optIfODUkTtpDEGThr Indicates the threshold level for declaring a performance
monitoring (PM) Second to be bad. A PM Second is declared bad if
the percentage of detected errored blocks in that secon… | column | percentage OptIfDEGThr | .1.3.6.1.2.1.10.133.1.8.2.1.7 |
| optIfODUkTtpDEGM Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if optIfODUkDEGM
consecutive bad PM Seconds are detected.
This object is onl… | column | OptIfDEGM | .1.3.6.1.2.1.10.133.1.8.2.1.8 |
| optIfODUkTtpCurrentStatus Indicates the defect condition of the entity, if any.
This object is only applicable to the sink function, i.e.,
only when optIfODUkDirectionality has the value sink(1)
or bidirec… | column | Bits | .1.3.6.1.2.1.10.133.1.8.2.1.9 |