ons15501OpticalPowerGain

ONS15501-MIB · .1.3.6.1.4.1.1869.11.11.2.9

MIB view Table view

Object

scalar dB Ons15501TenthdB

The measured value for power gain.
This value does not include the amplification
noise that is significant for low input signals.

Context

MIB: ONS15501-MIB
OID: .1.3.6.1.4.1.1869.11.11.2.9
Type: scalar
Access: readonly
Status: current
Units: dB
Parent: ons15501Attr
Siblings: 17

Syntax

dB Ons15501TenthdB

Source: Ons15501TenthdB
Base type: Integer32

Values & Constraints

Type Constraints

range: -1000..500

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ons15501InputOpticalPower The optical power being fed into the Amplifier.	scalar	dBm Ons15501TenthdB	`.1.3.6.1.4.1.1869.11.11.2.1`
ons15501GainTrigger The gain deviation allowed from the configured gain before an alarm is asserted. The alarm is not cleared, until measured gain(ons15501OpticalPowerGain) is back within 90% of ons1…	scalar	dB Integer32	`.1.3.6.1.4.1.1869.11.11.2.10`
ons15501PowerSupply1Level The voltage fed through power supply 1. The value of the attribute is 10 times the the value in volts.	scalar	volts Ons15501TenthVolt	`.1.3.6.1.4.1.1869.11.11.2.11`
ons15501PowerSupply2Level The voltage fed through power supply 2. The value of the attribute is 10 times the the value in volts.	scalar	volts Ons15501TenthVolt	`.1.3.6.1.4.1.1869.11.11.2.12`
ons15501LaserStatus Gives the status of the laser pumps.	scalar	Ons15501AlarmStatus	`.1.3.6.1.4.1.1869.11.11.2.13`
ons15501DevAmbTemp The ambient temperature for the device.	scalar	degrees C Ons15501TenthCentigrade	`.1.3.6.1.4.1.1869.11.11.2.14`
ons15501DevAmbTempMean Mean value for temperature. If the temperature falls below (or goes above) the mean value by more than trigger level (see ons15501DevAmbTempTrigger) an alarm is generated. The ala…	scalar	degrees C Integer32	`.1.3.6.1.4.1.1869.11.11.2.15`
ons15501DevAmbTempTrigger Please refer to ons15501DevAmbTempMean above. Trigger defines the max deviation allowed from the mean, without an alarm being generated. Once an alarm is generated, it is not clea…	scalar	degrees C Integer32	`.1.3.6.1.4.1.1869.11.11.2.16`
ons15501PowerSupply1Status Gives the status of power supply one.	scalar	Ons15501AlarmStatus	`.1.3.6.1.4.1.1869.11.11.2.17`
ons15501PowerSupply2Status Gives the status of power supply two.	scalar	Ons15501AlarmStatus	`.1.3.6.1.4.1.1869.11.11.2.18`
ons15501InputOpticalPowerMean Mean value for input optical power. If the input optical power falls below the mean value by more than trigger (see ons15501InputOpticalPowerTrigger) an alarm is generated. The al…	scalar	dBm Integer32	`.1.3.6.1.4.1.1869.11.11.2.2`
ons15501InputOpticalPowerTrigger Trigger defines the max deviation allowed from the mean, without an alarm being generated. Once an alarm is generated, it is not cleared until the input optical power falls back w…	scalar	dB Integer32	`.1.3.6.1.4.1.1869.11.11.2.3`
ons15501OutputOpticalPower The measured value for raw optical power being generated at the output of the Amplifier.	scalar	dBm Ons15501TenthdB	`.1.3.6.1.4.1.1869.11.11.2.4`
ons15501OutputSignalPower The optical signal power at the output of the Amplifier. The value of this attribute triggers the alarm, based on mean value and trigger as defined by ons15501OutputSignalPowerMe…	scalar	dBm Ons15501TenthdB	`.1.3.6.1.4.1.1869.11.11.2.5`
ons15501OutputSignalPowerMean Mean value for output optical power. If the output signal power falls below (or goes above) the mean value by more than trigger (see ons15501OutputSignalPowerTrigger) an alarm is …	scalar	dBm Integer32	`.1.3.6.1.4.1.1869.11.11.2.6`
ons15501OutputSignalPowerTrigger Trigger defines the max deviation allowed from the mean, without an alarm being generated. Once an alarm is generated, it is not cleared until the output signal power falls back w…	scalar	dB Integer32	`.1.3.6.1.4.1.1869.11.11.2.7`
ons15501ConfigOpticalGain The configured value for power gain.	scalar	dB Integer32	`.1.3.6.1.4.1.1869.11.11.2.8`