ons15501LaserStatus
ONS15501-MIB ·
.1.3.6.1.4.1.1869.11.11.2.13
Object
scalar
Ons15501AlarmStatus
Gives the status of the laser pumps.
Context
- MIB
- ONS15501-MIB
- OID
.1.3.6.1.4.1.1869.11.11.2.13- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- ons15501Attr
- Siblings
- 17
Syntax
Ons15501AlarmStatus
- Source
- Ons15501AlarmStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | critical |
2 | major |
3 | minor |
4 | info |
5 | noAlarm |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ons15501InputOpticalPower The optical power being fed into the Amplifier. | scalar | dBm Ons15501TenthdB | .1.3.6.1.4.1.1869.11.11.2.1 |
| ons15501GainTrigger The gain deviation allowed from the configured gain
before an alarm is asserted. The alarm is not cleared,
until measured gain(ons15501OpticalPowerGain) is back
within 90% of ons1… | scalar | dB Integer32 | .1.3.6.1.4.1.1869.11.11.2.10 |
| ons15501PowerSupply1Level The voltage fed through power supply 1.
The value of the attribute is 10 times the
the value in volts. | scalar | volts Ons15501TenthVolt | .1.3.6.1.4.1.1869.11.11.2.11 |
| ons15501PowerSupply2Level The voltage fed through power supply 2.
The value of the attribute is 10 times the
the value in volts. | scalar | volts Ons15501TenthVolt | .1.3.6.1.4.1.1869.11.11.2.12 |
| ons15501DevAmbTemp The ambient temperature for the device. | scalar | degrees C Ons15501TenthCentigrade | .1.3.6.1.4.1.1869.11.11.2.14 |
| ons15501DevAmbTempMean Mean value for temperature.
If the temperature falls below (or goes above) the
mean value by more than trigger level (see
ons15501DevAmbTempTrigger) an alarm is generated.
The ala… | scalar | degrees C Integer32 | .1.3.6.1.4.1.1869.11.11.2.15 |
| ons15501DevAmbTempTrigger Please refer to ons15501DevAmbTempMean above.
Trigger defines the max deviation allowed from the
mean, without an alarm being generated. Once an
alarm is generated, it is not clea… | scalar | degrees C Integer32 | .1.3.6.1.4.1.1869.11.11.2.16 |
| ons15501PowerSupply1Status Gives the status of power supply one. | scalar | Ons15501AlarmStatus | .1.3.6.1.4.1.1869.11.11.2.17 |
| ons15501PowerSupply2Status Gives the status of power supply two. | scalar | Ons15501AlarmStatus | .1.3.6.1.4.1.1869.11.11.2.18 |
| ons15501InputOpticalPowerMean Mean value for input optical power.
If the input optical power falls below
the mean value by more than trigger
(see ons15501InputOpticalPowerTrigger) an alarm
is generated. The al… | scalar | dBm Integer32 | .1.3.6.1.4.1.1869.11.11.2.2 |
| ons15501InputOpticalPowerTrigger Trigger defines the max deviation allowed from the
mean, without an alarm being generated. Once an
alarm is generated, it is not cleared until the
input optical power falls back w… | scalar | dB Integer32 | .1.3.6.1.4.1.1869.11.11.2.3 |
| ons15501OutputOpticalPower The measured value for raw optical power being
generated at the output of the Amplifier. | scalar | dBm Ons15501TenthdB | .1.3.6.1.4.1.1869.11.11.2.4 |
| ons15501OutputSignalPower The optical signal power at the output of the Amplifier.
The value of this attribute triggers the alarm, based on
mean value and trigger as defined by
ons15501OutputSignalPowerMe… | scalar | dBm Ons15501TenthdB | .1.3.6.1.4.1.1869.11.11.2.5 |
| ons15501OutputSignalPowerMean Mean value for output optical power.
If the output signal power falls below (or goes
above) the mean value by more than trigger
(see ons15501OutputSignalPowerTrigger) an alarm
is … | scalar | dBm Integer32 | .1.3.6.1.4.1.1869.11.11.2.6 |
| ons15501OutputSignalPowerTrigger Trigger defines the max deviation allowed from the
mean, without an alarm being generated. Once an
alarm is generated, it is not cleared until the
output signal power falls back w… | scalar | dB Integer32 | .1.3.6.1.4.1.1869.11.11.2.7 |
| ons15501ConfigOpticalGain The configured value for power gain. | scalar | dB Integer32 | .1.3.6.1.4.1.1869.11.11.2.8 |
| ons15501OpticalPowerGain The measured value for power gain.
This value does not include the amplification
noise that is significant for low input signals. | scalar | dB Ons15501TenthdB | .1.3.6.1.4.1.1869.11.11.2.9 |