ostEthLckCfgErrorSelection
OMNITRON-MEF31EXT-MIB ·
.1.3.6.1.4.1.7342.10.1.5.2.2.1.3
Object
column
r/w
Bits
A vector of bits that indicates what specific errors cause entry into
automatic LCK admin state.
A bit set to '1' enables the specific error for LCK admin state entry.
A bit set to '0' disables the specific error for LCK admin state entry.
bLink(0) enables/disables LCK admin state entry based upon link failure
bLock(1) enables/disables LCK admin state entry based upon ETH-LCK PDU received
bLower(2) enables/disables LCK admin state entry based upon lower MEP error
bMep(3) enables/disables LCK admin state entry based upon local MEP error
bAisRx(4) enables/disables LCK admin state entry based upon AIS reception
bAisTx(5) enables/disables LCK admin state entry based upon AIS generation
Context
- MIB
- OMNITRON-MEF31EXT-MIB
- OID
.1.3.6.1.4.1.7342.10.1.5.2.2.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ostEthLckCfgEntry
- Table
- ostEthLckCfgTable
- Siblings
- 9
Syntax
Bits
Values & Constraints
Enumerated Values
0 | bLink |
1 | bLock |
2 | bLower |
3 | bMep |
4 | bAisRx |
5 | bAisTx |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ostEthLckCfgTxEnabled This attribute specifies whether ETH-LCK transmission is enabled.
The value 'true' indicates ETH-LCK transmission is enabled. LCK PDUs
are transmitted when mefSoamL… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.5.2.2.1.1 |
| ostEthLckCfgCtagVid The C-TAG VID associated with the LCK PDUs for the MEP that originates
on a S-Comp UNI port or an NNI port. The value must be a member of the
EVC that the MEP is associated with.
… | column | OMNITRON-TC-MIBOstVlanId | .1.3.6.1.4.1.7342.10.1.5.2.2.1.10 |
| ostEthLckCfgRxEnabled This attribute specifies whether ETH-LCK defect condition detection
is enabled.
The value 'true' indicates ETH-LCK defect condition detection is
enabled. This means… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.5.2.2.1.2 |
| ostEthLckCfgStatClear This object when written clears the ETH-LCK statistic counters associated
with the MEP. When read the value always returns 'false'.
Writing this value does not chan… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.5.2.2.1.4 |
| ostEthLckCfgVid The ETH-LCK PDU VID associated with. It must be a member of the EVC
that the MEP is associated with. The value is used when
ostEthLckCfgVidType is 'explicitVid' and is ignored oth… | column | OMNITRON-TC-MIBOstVlanId | .1.3.6.1.4.1.7342.10.1.5.2.2.1.5 |
| ostEthLckCfgVidTx The VID associated with the LCK PDUs for the MEP.
If the primary VID was selected it indicates the Primary VID used. If
the primary VID was not selected it indicate… | column | OMNITRON-TC-MIBOstVlanId | .1.3.6.1.4.1.7342.10.1.5.2.2.1.6 |
| ostEthLckCfgEnabled This object specifies whether the ETH-LCK function is enabled at a MEP.
The value 'true' indicates that ETH-LCK protocol is locally enabled.
The valu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.5.2.2.1.7 |
| ostEthLckCfgInMacAddr The source MAC Address Field of last ETH-LCK received by the MEP. If
no ETH-LCK PDU has been received by the NE the MAC address is set to
all zeros. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.7342.10.1.5.2.2.1.8 |
| ostEthLckCfgVidType This object selects the source of the VID used for the ETH-LCK PDUs.
primaryVid(1) VID used for LCK PDU is the primary VID of the MEP
explicitVid (2) VID used f… | column | Enumeration | .1.3.6.1.4.1.7342.10.1.5.2.2.1.9 |