ostErpsInstanceCfgWaitToBlockTime
OMNITRON-G8032-MIB ·
.1.3.6.1.4.1.7342.10.1.4.2.1.24
Object
column
r/w
Unsigned32
This object specifies the wait to block time in seconds.
This object can be written/modified after row creation time.
Context
- MIB
- OMNITRON-G8032-MIB
- OID
.1.3.6.1.4.1.7342.10.1.4.2.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ostErpsInstanceCfgEntry
- Table
- ostErpsInstanceCfgTable
- Siblings
- 35
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-12
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ostErpsInstanceCfgIndex An index to the ERPS Instance Configuration table which indicates
the specific ERPS instance for the module.
ostErpsGlobalCfgNextIndex needs to be inspected to find… | column | Unsigned32 | .1.3.6.1.4.1.7342.10.1.4.2.1.1 |
| ostErpsInstanceCfgRingType This object selects the specific ring type.
open(1) ERPS instance is an open ring
closed(2) ERPS instance is a closed ring
This objec… | column | Enumeration | .1.3.6.1.4.1.7342.10.1.4.2.1.10 |
| ostErpsInstanceCfgRp0PortNumber This object selects the Ring Port 0 port number for the specific ERPS
instance that is configured.
This object can only be written at row creation time and cannot b… | column | OMNITRON-TC-MIBOstPortNumber | .1.3.6.1.4.1.7342.10.1.4.2.1.11 |
| ostErpsInstanceCfgRp0PortType This object selects the specific protection port type for Ring Port 0.
none(0) ERPS instance port is not configured
ringPort(1) ERPS i… | column | Enumeration | .1.3.6.1.4.1.7342.10.1.4.2.1.12 |
| ostErpsInstanceCfgRp0MdIndex This object specifies the Ring Port 0 MEP ERPS instance maintenance
domain index. The value of the object is ignored if
ostErpsInstanceCfgRp0PortType is type 'none'. If not config… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.10.1.4.2.1.13 |
| ostErpsInstanceCfgRp0MaIndex This object specifies the Ring Port 0 ERPS instance maintenance
association index. The value of the object is ignored if
ostErpsInstanceCfgRp0PortType is type 'none'. If not confi… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.10.1.4.2.1.14 |
| ostErpsInstanceCfgRp0MepId This object specifies the Ring Port 0 ERPS instance local Maintenance
End Point Identifier (MEP). The value of the object is ignored if
ostErpsInstanceCfgRp0PortType is type 'none… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.7342.10.1.4.2.1.15 |
| ostErpsInstanceCfgRp1PortNumber This object selects the Ring Port 1 port number for the specific ERPS
instance that is configured. The value is ignored if
ostErpsInstanceCfgRp1PortType is 'virtual port'.
… | column | OMNITRON-TC-MIBOstPortNumber | .1.3.6.1.4.1.7342.10.1.4.2.1.16 |
| ostErpsInstanceCfgRp1PortType This object selects the specific protection port type for Ring Port 1.
none(0) ERPS instance port is not configured
ringPort(1) ERPS instance … | column | Enumeration | .1.3.6.1.4.1.7342.10.1.4.2.1.17 |
| ostErpsInstanceCfgRp1MdIndex This object specifies the Ring Port 1 MEP ERPS instance maintenance
domain index. The value of the object is ignored if
ostErpsInstanceCfgRp1PortType is type 'none'. If not config… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.10.1.4.2.1.18 |
| ostErpsInstanceCfgRp1MaIndex This object specifies the Ring Port 1 ERPS instance maintenance
association index. The value of the object is ignored if
ostErpsInstanceCfgRp1PortType is type 'none'. If not confi… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.10.1.4.2.1.19 |
| ostErpsInstanceCfgRowStatus The status of the row.
The writable columns in a row cannot be changed if the row
is active. All columns must have a valid value before a row
can be activated. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.7342.10.1.4.2.1.2 |
| ostErpsInstanceCfgRp1MepId This object specifies the Ring Port 1 ERPS instance local Maintenance
End Point Identifier. The value of the object is ignored if
ostErpsInstanceCfgRp1PortType is type 'none'. If … | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.7342.10.1.4.2.1.20 |
| ostErpsInstanceCfgRp1VirtualDomainIndex This object specifies which instance number the virtual channel
APS frames are sent to complete the virtual ring. The APS frames
are set to the port numbers associated with the in… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.10.1.4.2.1.21 |
| ostErpsInstanceCfgGuardOffTime This object specifies the guard time in 0.01 seconds.
A value of 0 indicates there is no guard time.
This object can be written/modified after row cr… | column | Unsigned32 | .1.3.6.1.4.1.7342.10.1.4.2.1.22 |
| ostErpsInstanceCfgHoldOffTime This object specifies the hold-off time in 0.1 seconds.
A value of 0 indicates there is no hold-off time.
This object can be written/modified after r… | column | Unsigned32 | .1.3.6.1.4.1.7342.10.1.4.2.1.23 |
| ostErpsInstanceCfgWaitToRestoreTime This object specifies the wait to restore time in minutes.
This object can be written/modified after row creation time. | column | Unsigned32 | .1.3.6.1.4.1.7342.10.1.4.2.1.25 |
| ostErpsInstanceCfgApsRate This object specifies the time between APS frames in seconds.
This object is only used when the APS frame transmission is enabled.
This object can be… | column | Unsigned32 | .1.3.6.1.4.1.7342.10.1.4.2.1.26 |
| ostErpsInstanceCfgApsToSend This object specifies the number of APS frames to send that are
separated by a minimum delay when a protection switch occurs.
This object is only used when the APS … | column | Unsigned32 | .1.3.6.1.4.1.7342.10.1.4.2.1.27 |
| ostErpsInstanceCfgApsScope This object selects the specific protection type for the protection
instance.
port(1) ERPS instance protects the whole port
evc(2) ERPS i… | column | Enumeration | .1.3.6.1.4.1.7342.10.1.4.2.1.28 |
| ostErpsInstanceCfgApsMdLevel This object specifies the APS maintenance domain level.
This object can only be written at row creation time and cannot be
modified once it has been created. | column | Unsigned32 | .1.3.6.1.4.1.7342.10.1.4.2.1.29 |
| ostErpsInstanceCfgProfileEnable This object specifies whether the ERPS profile is enabled for
the ERPS instance.
The value 'true' indicates the ERPS profile instance is enabled.
The… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.4.2.1.3 |
| ostErpsInstanceCfgApsPriority This object specifies the ERPS instance PCP value (tag priority) on
the generated APS PDU.
This object can only be written at row creation time and cannot be
modifi… | column | IEEE8021-TC-MIBIEEE8021PriorityValue | .1.3.6.1.4.1.7342.10.1.4.2.1.30 |
| ostErpsInstanceCfgApsEvcIndex This object defines the APS channel EVC index for the ERPS instance.
This object can only be written at row creation time and cannot be
modified once it has been cr… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.10.1.4.2.1.31 |
| ostErpsInstanceCfgManualModePort This object selects the port number that is used with the
ostErpsInstanceCfgManualModeCmd object. This object needs to be configured
correctly before the command is issued.
… | column | OMNITRON-TC-MIBOstPortNumber | .1.3.6.1.4.1.7342.10.1.4.2.1.32 |
| ostErpsInstanceCfgManualModeCmd This object selects the protection instance manual mode command. When
written the indicated manual mode is sent to the port configured
by the ostErpsInstanceCfgManualModePort obje… | column | Enumeration | .1.3.6.1.4.1.7342.10.1.4.2.1.33 |
| ostErpsInstanceCfgClearStatistics This object when written clears the statistic counters associated with
a specific protection instance. When read the value always returns
'false'.
Writing this valu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.4.2.1.34 |
| ostErpsInstanceCfgRingId This object specifies the R-APS ring ID. In general this value will
always be '1'
This object can only be written at row creation time and cannot be
modified once i… | column | Unsigned32 | .1.3.6.1.4.1.7342.10.1.4.2.1.35 |
| ostErpsInstanceCfgEvcNextIndex This object contains an unused value for a EVC index number for a
specific ERPS instance that can be used to add the next EVC associated
with a specific ERPS instance, or a zero t… | column | OMNITRON-TC-MIBOstIndexIntegerNextFree | .1.3.6.1.4.1.7342.10.1.4.2.1.36 |
| ostErpsInstanceCfgGuardTimerEnable This object specifies whether the ERPS guard timer function is
enabled for the ERPS instance.
The value 'true' indicates the ERPS guard timer instance function is
e… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.4.2.1.4 |
| ostErpsInstanceCfgHoldOffEnable This object specifies whether the ERPS holdoff function is
enabled for the ERPS instance.
The value 'true' indicates the ERPS holdoff instance function is
enabled.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.4.2.1.5 |
| ostErpsInstanceCfgWaitToBlockEnable This object specifies whether the ERPS wait to block function is
enabled for the ERPS instance.
The value 'true' indicates the ERPS wait to block instance function
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.4.2.1.6 |
| ostErpsInstanceCfgWaitToRestoreEnable This object specifies whether the ERPS wait to restore function is
enabled for the ERPS instance.
The value 'true' indicates the ERPS wait to restore instance funct… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.4.2.1.7 |
| ostErpsInstanceCfgRevertive This object specifies whether the ERPS instance is revertive or
non-revertive. Revertive indicates whether the working link becomes
active after it is restored.
The… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.4.2.1.8 |
| ostErpsInstanceCfgProtectionName ERPS instance profile name.
This object may not be modified after creation. | column | OMNITRON-TC-MIBOstProfileNameString | .1.3.6.1.4.1.7342.10.1.4.2.1.9 |