ostEnetStRespCfgEgressPortNum
OMNITRON-EST-MIB ·
.1.3.6.1.4.1.7342.10.1.1.5.1.19
Object
This object selects the egress port number for the specific test
instance that is configured. The responding port for the specific test
instance is configured via the ostEnetStRespCfgPortNum object. A value
of '0' for this object indicates the egress port is the same as the
initiating port unless configured via ostEnetStRespCfgUpPort
This object can only be written at row creation time and cannot be
modified once it has been created.
Context
- MIB
- OMNITRON-EST-MIB
- OID
.1.3.6.1.4.1.7342.10.1.1.5.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ostEnetStRespCfgEntry
- Table
- ostEnetStRespCfgTable
- Siblings
- 36
Syntax
OMNITRON-TC-MIBOstPortNumber
- Source
- OMNITRON-TC-MIBOstPortNumber
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..99
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ostEnetStRespCfgIndex An index to the EnetST Responder Configuration table which indicates
the specific test session for the module.
ostEnetStGlobalCfgRespSessionNextIndex needs to be in… | column | Unsigned32 | .1.3.6.1.4.1.7342.10.1.1.5.1.1 |
| ostEnetStRespCfgCos This object defines which Class of Service (CoS) the test responder
is associated with. It must be configured if ostEnetStRespCfgType is
'evccos'. It is ignored for other test ins… | column | OMNITRON-TC-MIBOstCosNameString | .1.3.6.1.4.1.7342.10.1.1.5.1.10 |
| ostEnetStRespCfgMdIndex This object specifies the test responder maintenance domain index for
the generated test PDU.
The value is ignored for ostEnetStRespCfgType 'port', 'evc', or 'evcco… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.10.1.1.5.1.11 |
| ostEnetStRespCfgMaIndex This object specifies the test responder maintenance association index
for the generated test PDU.
The value is ignored for ostEnetStRespCfgType 'port', 'evc', or '… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.10.1.1.5.1.12 |
| ostEnetStRespCfgSourceMacAddress This object specifies a valid Source MAC Address Field of the received
test PDUs if the value is non-zero.
If ostEnetStRespCfgType is 'port', 'evc', or 'evccos' the… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.7342.10.1.1.5.1.13 |
| ostEnetStRespCfgSourceIsMepId This object indicates whether the source MEP of the received test PDU
is identified via its MEP ID or its MAC address.
If ostEnetStRespCfgType is 'port', 'evc', or … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.1.5.1.14 |
| ostEnetStRespCfgSourceMepId The Maintenance End Point Identifier of another MEP in the same
Maintenance Association to which the test instance PDU is from.
This MEP ID will be used to validate… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.7342.10.1.1.5.1.15 |
| ostEnetStRespCfgFrameType Deprecated. The value of this object is ignored | column | Enumeration | .1.3.6.1.4.1.7342.10.1.1.5.1.16 |
| ostEnetStRespCfgReplyType This object selects the specific type of test response.
loop(1) Test responder MAC DA/SA is unchanged (no swap), L1
macswap(2) Test responder MAC… | column | Enumeration | .1.3.6.1.4.1.7342.10.1.1.5.1.17 |
| ostEnetStRespCfgStatClear This object when written clears the statistic counters associated with
a specific test responder. When read the value always returns 'false'.
Writing this value doe… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.1.5.1.18 |
| ostEnetStRespCfgRowStatus The status of the row.
The writable columns in a row cannot be changed if the row
is active. All columns must have a valid value before a row
can be activated. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.7342.10.1.1.5.1.2 |
| ostEnetStRespCfgTestStatus This object indicates the status of the currently indicated Test
Instance. | column | OMNITRON-TC-MIBOstTestStatusType | .1.3.6.1.4.1.7342.10.1.1.5.1.20 |
| ostEnetStRespCfgVid The test VID associated with this EVC on this interface. It must be
a member of the EVC selected by ostEnetStRespCfgEvc.
If defined, it is the value of VLAN ID that… | column | OMNITRON-TC-MIBOstVlanId | .1.3.6.1.4.1.7342.10.1.1.5.1.21 |
| ostEnetStRespCfgLocalMac This object indicates whether the received test instance PDU must match
the local port's MAC address.
The value 'true' indicates the test PDU must match the test in… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.1.5.1.22 |
| ostEnetStRespCfgMulticast This object indicates that a received test PDU with a destination
address that is multicast or broadcast will be responded to and
replaced with the local test instance's MAC addre… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.1.5.1.23 |
| ostEnetStRespCfgVidRx The VLAN ID associated with the Test PDUs for the Test Instance.
A value of '0' indicates that Test PDUs are untagged or the instance
is port based. | column | OMNITRON-TC-MIBOstVlanId | .1.3.6.1.4.1.7342.10.1.1.5.1.24 |
| ostEnetStRespCfgRemote This object selects the specific type of remote protocol for the specific
Test Responder instance.
none(1) Test response is independent of loop up/down protoc… | column | Enumeration | .1.3.6.1.4.1.7342.10.1.1.5.1.25 |
| ostEnetStRespCfgDestIpAddress This object indicates the destination IPv4 address of the specific test
instance.
A non-zero value for this object or ostEnetStRespCfgDestIpAddressString
indicates … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.10.1.1.5.1.26 |
| ostEnetStRespCfgSrcIpAddress This object indicates the source IPv4 address of the specific test
instance for an L3 type of test
A non-zero value for this object or ostEnetStRespCfgSrcIpAddressS… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.10.1.1.5.1.27 |
| ostEnetStRespCfgEthertype This object specifies the test instance Ethertype that is used at the
start of the data portion of the frame at the VID TAG.
The value is ignored for ostEnetStRespC… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.10.1.1.5.1.28 |
| ostEnetStRespCfgDestIpAddressString This object indicates the destination IPv4 or IPv6 address of the
specific test instance.
A non-zero value for this object indicates that the matching Ethernet
fram… | column | OMNITRON-TC-MIBOstIpAddr | .1.3.6.1.4.1.7342.10.1.1.5.1.29 |
| ostEnetStRespCfgProfileName Test Responder profile name.
This object may not be modified after creation. | column | OMNITRON-TC-MIBOstProfileNameString | .1.3.6.1.4.1.7342.10.1.1.5.1.3 |
| ostEnetStRespCfgSrcIpAddressString This object indicates the source IPv4 or IPv6 address of the
specific test instance for an L3 type of test
A non-zero value for this object indicates that the match… | column | OMNITRON-TC-MIBOstIpAddr | .1.3.6.1.4.1.7342.10.1.1.5.1.30 |
| ostEnetStRespCfgUpPort This object allows an egress port to be dynamically determined by
sending traffic out all the ports in an EVC instead of a specific
egress port (ostEnetStRespCfgEgressPortNum).
… | column | Enumeration | .1.3.6.1.4.1.7342.10.1.1.5.1.31 |
| ostEnetStRespCfgPersist This object specifies whether the Test Responder instance is enabled
to be saved (persistent) when a save command occurs.
The value 'true' indicates the Test Respon… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.1.5.1.32 |
| ostEnetStRespCfgTwampServerPort TWAMP server TCP port | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.10.1.1.5.1.33 |
| ostEnetStRespCfgTwampUdpSrcPort TWAMP UDP source port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.10.1.1.5.1.34 |
| ostEnetStRespCfgTwampUdpDstPort TWAMP UDP destination port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.10.1.1.5.1.35 |
| ostEnetStRespCfgGatewayIpAddressString This object indicates the gateway IPv4 or IPv6 address of the
specific test instance for remote protocol IP Loopback type of test
for the SFP-NID.
It is illegal to … | column | OMNITRON-TC-MIBOstIpAddr | .1.3.6.1.4.1.7342.10.1.1.5.1.36 |
| ostEnetStRespCfgNetworkAddressLength This object configures the IPv4 subnet mask bit length (maximum size
of 28) or the IPv6 prefix bit length (maximum size of 128) for the
SFP-NID.
This object can onl… | column | Unsigned32 | .1.3.6.1.4.1.7342.10.1.1.5.1.37 |
| ostEnetStRespCfgReflector This object specifies whether the Test Reflector function is
enabled for the test response.
The value 'true' indicates the Test Reflector function is enabled
for th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.1.5.1.4 |
| ostEnetStRespCfgTestMonitor This object specifies whether the Test Monitor function is
enabled for the test instance.
The value 'true' indicates the Test Monitor function is enabled
for the te… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.1.5.1.5 |
| ostEnetStRespCfgInService This object specifies whether the Test In-Service function is
enabled for the test instance.
The value 'true' indicates the Test In-Service function is enabled
for … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.1.5.1.6 |
| ostEnetStRespCfgPortNum This object selects the port number for the specific test
responder that is configured.
This object can only be written at row creation time and cannot be
modified … | column | OMNITRON-TC-MIBOstPortNumber | .1.3.6.1.4.1.7342.10.1.1.5.1.7 |
| ostEnetStRespCfgType This object selects the specific type of Test Responder instance.
port(1) Test responder is port based
evc(2) Test instance is EVC based
evccos(3) … | column | Enumeration | .1.3.6.1.4.1.7342.10.1.1.5.1.8 |
| ostEnetStRespCfgEvc This object defines which EVC the test responder is associated with.
It must be configured if ostEnetStRespCfgType is 'evc' or 'evccos'. It
is ignored for other test responder typ… | column | OMNITRON-TC-MIBOstEvcNameString | .1.3.6.1.4.1.7342.10.1.1.5.1.9 |