envTestPt1Descr

OLD-CISCO-SYS-MIB · .1.3.6.1.4.1.9.2.1.78
MIB view Table view

Object

scalar mandatory RFC1213-MIBDisplayString 
Description of the test point 1. Typically
ambient air or the temperature of air
entering the router

Context

MIB
OLD-CISCO-SYS-MIB
OID
.1.3.6.1.4.1.9.2.1.78
Type
scalar
Access
readonly
Status
mandatory
Parent
lsystem
Siblings
111

Syntax

RFC1213-MIBDisplayString
Source
RFC1213-MIBDisplayString
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
romId mandatory
This variable contains a printable octet string which contains the System Bootstrap description and version identification.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.1
bufferElMax mandatory
Contains the maximum number of buffer elements.
scalarInteger32.1.3.6.1.4.1.9.2.1.10
envTestPt5last mandatory
Value of TestPt5 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.9.2.1.100
envTestPt6last mandatory
Value of TestPt6 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.9.2.1.101
envTestPt1warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.9.2.1.102
envTestPt2warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.9.2.1.103
envTestPt3warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.9.2.1.104
envTestPt4warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.9.2.1.105
envTestPt5warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.9.2.1.106
envTestPt6warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.9.2.1.107
envFirmVersion mandatory
Description of Environmental Card firmware
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.108
envTechnicianID mandatory
Technician ID
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.109
bufferElHit mandatory
Contains the number of buffer element hits.
scalarInteger32.1.3.6.1.4.1.9.2.1.11
envType mandatory
The type of environmental card
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.110
envBurnDate mandatory
The calibration / burn in date
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.111
envSerialNumber mandatory
Serial Number of environmental monitor card
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.112
bufferElMiss mandatory
Contains the number of buffer element misses.
scalarInteger32.1.3.6.1.4.1.9.2.1.12
bufferElCreate mandatory
Contains the number of buffer element creates.
scalarInteger32.1.3.6.1.4.1.9.2.1.13
bufferSmSize mandatory
Contains the size of small buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.14
bufferSmTotal mandatory
Contains the total number of small buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.15
bufferSmFree mandatory
Contains the number of free small buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.16
bufferSmMax mandatory
Contains the maximum number of small buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.17
bufferSmHit mandatory
Contains the number of small buffer hits.
scalarInteger32.1.3.6.1.4.1.9.2.1.18
bufferSmMiss mandatory
Contains the number of small buffer misses.
scalarInteger32.1.3.6.1.4.1.9.2.1.19
whyReload mandatory
This variable contains a printable octet string which contains the reason why the system was last restarted.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.2
bufferSmTrim mandatory
Contains the number of small buffer trims.
scalarInteger32.1.3.6.1.4.1.9.2.1.20
bufferSmCreate mandatory
Contains the number of small buffer creates.
scalarInteger32.1.3.6.1.4.1.9.2.1.21
bufferMdSize mandatory
Contains the size of medium buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.22
bufferMdTotal mandatory
Contains the total number of medium buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.23
bufferMdFree mandatory
Contains the number of free medium buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.24
bufferMdMax mandatory
Contains the maximum number of medium buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.25
bufferMdHit mandatory
Contains the number of medium buffer hits.
scalarInteger32.1.3.6.1.4.1.9.2.1.26
bufferMdMiss mandatory
Contains the number of medium buffer misses.
scalarInteger32.1.3.6.1.4.1.9.2.1.27
bufferMdTrim mandatory
Contains the number of medium buffer trims.
scalarInteger32.1.3.6.1.4.1.9.2.1.28
bufferMdCreate mandatory
Contains the number of medium buffer creates.
scalarInteger32.1.3.6.1.4.1.9.2.1.29
hostName mandatory
This variable represents the name of the host in printable ascii characters.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.3
bufferBgSize mandatory
Contains the size of big buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.30
bufferBgTotal mandatory
Contains the total number of big buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.31
bufferBgFree mandatory
Contains the number of free big buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.32
bufferBgMax mandatory
Contains the maximum number of big buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.33
bufferBgHit mandatory
Contains the number of big buffer hits.
scalarInteger32.1.3.6.1.4.1.9.2.1.34
bufferBgMiss mandatory
Contains the number of big buffer misses.
scalarInteger32.1.3.6.1.4.1.9.2.1.35
bufferBgTrim mandatory
Contains the number of big buffer trims.
scalarInteger32.1.3.6.1.4.1.9.2.1.36
bufferBgCreate mandatory
Contains the number of big buffer creates.
scalarInteger32.1.3.6.1.4.1.9.2.1.37
bufferLgSize mandatory
Contains the size of large buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.38
bufferLgTotal mandatory
Contains the total number of large buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.39
domainName mandatory
This variable is the domain portion of the domain name of the host.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.4
bufferLgFree mandatory
Contains the number of free large buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.40
bufferLgMax mandatory
Contains the maximum number of large buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.41
bufferLgHit mandatory
Contains the number of large buffer hits.
scalarInteger32.1.3.6.1.4.1.9.2.1.42
bufferLgMiss mandatory
Contains the number of large buffer misses.
scalarInteger32.1.3.6.1.4.1.9.2.1.43
bufferLgTrim mandatory
Contains the number of large buffer trims.
scalarInteger32.1.3.6.1.4.1.9.2.1.44
bufferLgCreate mandatory
Contains the number of large buffer creates.
scalarInteger32.1.3.6.1.4.1.9.2.1.45
bufferFail mandatory
Count of the number of buffer allocation failures.
scalarInteger32.1.3.6.1.4.1.9.2.1.46
bufferNoMem mandatory
Count of the number of buffer create failures due to no free memory.
scalarInteger32.1.3.6.1.4.1.9.2.1.47
netConfigAddr mandatory
Holds the address of the host that supplied the network-confg file.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.9.2.1.48
netConfigName mandatory
Holds the name of the network configuration file.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.49
authAddr mandatory
This variable contains the last SNMP authorization failure IP address.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.9.2.1.5
netConfigSet mandatory
Cause the loading of a new network-confg file using TFTP.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.50
hostConfigAddr obsolete
Contains the address of the host that provided the host-config file.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.9.2.1.51
hostConfigName obsolete
Contains the name of the last configured host-confg file.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.52
hostConfigSet obsolete
Cause the loading of a new host-confg file using TFTP.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.53
writeMem mandatory
Write configuration into non-volatile memory / erase config memory if 0.
scalarInteger32.1.3.6.1.4.1.9.2.1.54
writeNet mandatory
Write configuration to host using TFTP.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.55
busyPer mandatory
CPU busy percentage in the last 5 second period. Not the last 5 realtime seconds but the last 5 second period in the scheduler.
scalarInteger32.1.3.6.1.4.1.9.2.1.56
avgBusy1 mandatory
1 minute exponentially-decayed moving average of the CPU busy percentage.
scalarInteger32.1.3.6.1.4.1.9.2.1.57
avgBusy5 mandatory
5 minute exponentially-decayed moving average of the CPU busy percentage.
scalarInteger32.1.3.6.1.4.1.9.2.1.58
idleCount mandatory
cisco internal variable. not to be used
scalarInteger32.1.3.6.1.4.1.9.2.1.59
bootHost mandatory
Contains the IP address of the host that supplied the currently running software.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.9.2.1.6
idleWired mandatory
cisco internal variable. not to be used
scalarInteger32.1.3.6.1.4.1.9.2.1.60
ciscoContactInfo mandatory
cisco's name and address
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.61
bufferHgSize mandatory
Contains the size of huge buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.62
bufferHgTotal mandatory
Contains the total number of huge buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.63
bufferHgFree mandatory
Contains the number of free huge buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.64
bufferHgMax mandatory
Contains the maximum number of huge buffers.
scalarInteger32.1.3.6.1.4.1.9.2.1.65
bufferHgHit mandatory
Contains the number of huge buffer hits.
scalarInteger32.1.3.6.1.4.1.9.2.1.66
bufferHgMiss mandatory
Contains the number of huge buffer misses.
scalarInteger32.1.3.6.1.4.1.9.2.1.67
bufferHgTrim mandatory
Contains the number of huge buffer trims.
scalarInteger32.1.3.6.1.4.1.9.2.1.68
bufferHgCreate mandatory
Contains the number of huge buffer creates.
scalarInteger32.1.3.6.1.4.1.9.2.1.69
ping obsolete
The ping mib object is obsolete as of IOS 10.2 It has been superseded by the Cisco Ping MIB
scalarInteger32.1.3.6.1.4.1.9.2.1.7
netConfigProto mandatory
Holds the protocol that supplied the network-confg file.
scalarInteger32.1.3.6.1.4.1.9.2.1.70
hostConfigProto mandatory
Holds the protocol that supplied the host- confg file.
scalarInteger32.1.3.6.1.4.1.9.2.1.71
sysConfigAddr mandatory
Holds the address of the host that supplied the system boot image.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.9.2.1.72
sysConfigName mandatory
Holds the name of the system boot image.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.73
sysConfigProto mandatory
Holds the protocol that supplied the system boot image.
scalarInteger32.1.3.6.1.4.1.9.2.1.74
sysClearARP mandatory
Perform a clearing of the entire ARP cache and invalidation of route caches.
scalarInteger32.1.3.6.1.4.1.9.2.1.75
sysClearInt mandatory
Clear interface given IfIndex as value.
scalarInteger32.1.3.6.1.4.1.9.2.1.76
envPresent mandatory
Is there an environmental monitor card in this box?, 0 - No, 1-AGS card present, wrong firmware, 2-AGS CARD present, firmware ok, 3-7000 support
scalarInteger32.1.3.6.1.4.1.9.2.1.77
envTestPt1Measure mandatory
Current value of test point 1. Typically a temperature in centigrade.
scalarInteger32.1.3.6.1.4.1.9.2.1.79
freeMem obsolete
The freeMem mib object is obsolete as of IOS 11.1 It has been replaced with the cisco memory pool mib
scalarInteger32.1.3.6.1.4.1.9.2.1.8
envTestPt2Descr mandatory
Description of the test point 2. Typically airflow or the temperature of air leaving the router
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.80
envTestPt2Measure mandatory
Current value of test point 2. Typically a temperature in centigrade.
scalarInteger32.1.3.6.1.4.1.9.2.1.81
envTestPt3Descr mandatory
Description of the test point 3. Typically +5 volt
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.82
envTestPt3Measure mandatory
Current value of test point 3. Typically the value in millivolts of the +5v supply
scalarInteger32.1.3.6.1.4.1.9.2.1.83
envTestPt4Descr mandatory
Description of the test point 4. Typically +12 volt
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.84
envTestPt4Measure mandatory
Current value of test point 4. Typically the value in millivolts of the +12v supply
scalarInteger32.1.3.6.1.4.1.9.2.1.85
envTestPt5Descr mandatory
Description of the test point 5. Typically -12 volt
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.86
envTestPt5Measure mandatory
Current value of test point 5. Typically the value in millivolts of the -12v supply
scalarInteger32.1.3.6.1.4.1.9.2.1.87
envTestPt6Descr mandatory
Description of the test point 6. Typically -5 volt
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.9.2.1.88
envTestPt6Measure mandatory
Current value of test point 6. Typically the value in millivolts of the -5v supply
scalarInteger32.1.3.6.1.4.1.9.2.1.89
bufferElFree mandatory
Contains the number of free buffer elements.
scalarInteger32.1.3.6.1.4.1.9.2.1.9
envTestPt1MarginVal mandatory
Value at which the router will shutdown. Typically the ambient air temperature that will shut the router down. (e.g. 43)
scalarInteger32.1.3.6.1.4.1.9.2.1.90
envTestPt2MarginVal mandatory
Value at which the router will shutdown. Typically the airflow air temperature that will shut the router down. (e.g. 58)
scalarInteger32.1.3.6.1.4.1.9.2.1.91
envTestPt3MarginPercent mandatory
+/- Percentage that will shut the router down, (e.g. 10%) typically +5 volt
scalarInteger32.1.3.6.1.4.1.9.2.1.92
envTestPt4MarginPercent mandatory
+/- Percentage that will shut the router down, (e.g. 15%) typically +12 volt
scalarInteger32.1.3.6.1.4.1.9.2.1.93
envTestPt5MarginPercent mandatory
+/- Percentage that will shut the router down, (e.g. 15%) typically -12 volt
scalarInteger32.1.3.6.1.4.1.9.2.1.94
envTestPt6MarginPercent mandatory
+/- Percentage that will shut the router down, (e.g. 10%) typically -5 volt
scalarInteger32.1.3.6.1.4.1.9.2.1.95
envTestPt1last mandatory
Value of TestPt1 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.9.2.1.96
envTestPt2last mandatory
Value of TestPt2 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.9.2.1.97
envTestPt3last mandatory
Value of TestPt3 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.9.2.1.98
envTestPt4last mandatory
Value of TestPt4 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.9.2.1.99